faculty

師資介紹

蔡忠佑
  • 姓名

    蔡忠佑

  • 職稱

    專任教授

  • 學歷

    國立成功大學 / 中華民國 / 機械工程 / 博士

  • 專長

    1.光學領域:歪斜光線追蹤、靈敏度分析、光學設計、光學量測。 2.機構領域:齒輪設計製造、凸輪設計製造、機構設計、多軸工具機之NC程式設計、三次元量床量測。

  • 研究室

    工學院二館524 R524

  • 聯絡電話

    TEL:(05)272-0411 ext.33316
    FAX:(05)272-0589

  • Email

    cytsai@ccu.edu.tw

  • 網頁

    個人網頁連結

SCI Journal Paper:  

1.   C.Y.Tsai*, "Simple mathematical approach for analyzing gear tooth profile errors of different gears cut using same power-skiving tool," Mechanism and Machine Theory, 177, 105042, 2022. (SCI, IF=3.866, Rank=29/135, Q1, Category: Engineering, Mechanical)

2.   C.Y.Tsai*, "Design of free-form trough reflector for solar thermal concentrator system based on quadratic Bézier curves," Optics Communications, 511, 128024, 2022. (SCI, IF=2.31, Rank=51/99, Q3, Category: Optics)

3.   C.Y.Tsai*, "Error-free measurement method for 6-DOF systems via matrix decomposition approach," Applied Mathematical Modelling,  104, 188–204, 2022. (SCI, IF=5.129, Rank=8/108, Q1, Category: Mathematics, Interdisciplinary Applications)

4.   C.Y.Tsai*, "Power-skiving tool design method for interference-free involute internal gear cutting," Mechanism and Machine Theory, 164, 104396, 2021. (SCI, IF=3.312, Rank=30/130, Q1, Category: Engineering, Mechanical)

5.   J.C.Huang, C.S.Liu*, and C.Y.Tsai, "Calibration procedure of camera with multifocus zoom lens for three-dimensional scanning system," IEEE Access, 7, 106387-106398, 2021. (SCI, IF=3.367, Rank=94/273, Q2, Category: Engineering, Electrical & electronic)

6.   C.Y.Tsai* and C.K.Sung, "A general algebraic trajectory formula of the semi-trailer truck vehicles," IEEE Transactions on Automation Science and Engineering, 18, 2156-2165, 2021. (SCI, IF=4.938, Rank=13/63, Q1, Category: Automation & control systems)

7.   C.Y.Tsai*, "Gear module adjustment method for shrinkage compensation of injection molded plastic gears using single dedicated hob," Mechanism and Machine Theory, 140, 233-244, 2019. (SCI, IF=3.312, Rank=30/130, Q1, Category: Engineering, Mechanical)

8.   C.Y.Tsai* and P.D.Lin, "Gear manufacturing using power-skiving method on six-axis CNC turn-mill machining center," International Journal of Advanced Manufacturing Technology, 95, 609-623, 2018. (SCI, IF=2.496, Rank=23/49, Q2, Category: Engineering, Manufacturing)

9.   C.Y.Tsai*, "A novel design of an electric power-assisted bike based on helical gears," Transactions of the Canadian Society for Mechanical Engineering, 41, 845-854, 2017. (SCI, IF=0.248, Rank=123/128, Q4, Category: Engineering, Mechanical)

10.   C.Y.Tsai*, "Refractive collimation beam shaper design and sensitivity analysis using free-form profile construction method," Journal Of The Optical Society Of America A-Optics Image Science And Vision, 34, 1236-1245, 2017. (SCI, IF=1.566, Rank=53/94, Q3, Category: Optics)

11. P.D.Lin* and C.Y.Tsai, "Paraxial ray-tracing equations for optical systems containing triangular prisms," Journal Of The Optical Society Of America A-Optics Image Science And Vision, 34, 361-369, 2017. (SCI, IF=1.566, Rank=53/94, Q3, Category: Optics)

12. C.Y.Tsai*, "Design of free-form reflector for vehicle LED low-beam headlamp," Optics Communications, 372, 1-13, 2016. (SCI, IF=1.588, Rank=52/92, Q3, Category: Optics)

13. C.Y.Tsai*, "Free-form surface design method for non-axial symmetrical reflectors producing arbitrary image patterns," Optical Engineering, 55, 075104-1-075104-8, 2016. (SCI, IF=1.082, Rank=68/92, Q3, Category: Optics)

14. C.Y.Tsai*, "Mathematical model for design and analysis of power skiving tool for involute gear cutting," Mechanism and Machine Theory, 101, 195-208, 2016. (SCI, IF=2.577, Rank=26/130, Q1, Category: Engineering, Mechanical)

15. C.Y.Tsai*, "Free-form surface design method for collimator TIR lens," Journal of the Optical Society of America A-Optics Image Science and Vision, 33, 785-792, 2016. (SCI, IF=1.621, Rank=51/92, Q3, Category: Optics)

16. C.Y.Tsai*, "Optimized solar thermal concentrator system based on free-form trough reflector," Solar Energy, 125, 146-160, 2016. (SCI, IF=4.018, Rank=21/90, Q1, Category: Energy & Fuels)

17. C.Y.Tsai*, "Improved irradiance distribution on high concentration solar cell using free-form concentrator," Solar Energy, 115, 694-707, 2015. (SCI, IF=3.685, Rank=22/88, Q1, Category: Energy & Fuels)

18. C.Y.Tsai*, "Enhanced irradiance distribution on solar cell using optimized variable-focus-parabolic concentrator," Optics Communications, 305, 221-227, 2013. (SCI, IF=1.542, Rank=34/82, Q2, Category: Optics)

19. C.Y.Tsai*, "Design of optically stable image reflector system," Applied Optics, 52, 5385-5392, 2013. (SCI, IF=1.649, Rank=29/82, Q2, Category: Optics)

20. C.Y.Tsai*, "Design and analysis of reflector for uniform light-emitting diode illuminance," Journal of the Optical Society of America A-Optics Image Science and Vision, 30, 993-1001, 2013. (SCI, IF=1.448, Rank=38/82, Q2, Category: Optics)

21. P.D.Lin* and C.Y.Tsai, "Determination of unit normal vectors of aspherical surfaces given unit directional vectors of incoming and outgoing rays: reply," Journal of the Optical Society of America A-Optics Image Science and Vision, 29, 1358-1358, 2012. (SCI, IF=1.562, Rank=30/77, Q2, Category: Optics)

22. P.D.Lin* and C.Y.Tsai, "Determination of first-order derivatives of skew-ray at aspherical surface," Journal of the Optical Society of America A-Optics Image Science and Vision, 29, 1141-1153, 2012. (SCI, IF=1.562, Rank=30/77, Q2, Category: Optics)

23. C.Y.Tsai* and P.D.Lin, "Optimized variable-focus-parabolic-trough reflector for solar thermal concentrator system," Solar Energy, 86, 1164-1172, 2012. (SCI, IF=2.475, Rank=26/81, Q2, Category: Energy & Fuels)

24. C.Y.Tsai*, "Exact analytical approach for six-degree-of-freedom measurement using image-orientation-change method," Journal of the Optical Society of America A-Optics Image Science and Vision, 29, 385-393, 2012. (SCI, IF=1.562, Rank=30/77, Q2, Category: Optics)

25. P.D.Lin* and C.Y.Tsai, "Determination of unit normal vectors of aspherical surfaces given unit directional vectors of incoming and outgoing rays," Journal of the Optical Society of America A-Optics Image Science and Vision, 29, 174-178, 2012. (SCI, IF=1.562, Rank=30/77, Q2, Category: Optics)

26. C.Y.Tsai*, "An eigenvalue-based approach for the design of reflector systems and prisms with a specified image orientation change," Applied Physics B-Lasers and Optics, 102, 235-242, 2011. (SCI, IF=2.189, Rank=15/77, Q1, Category: Optics)

27. C.Y.Tsai*, "Design of partially optically stable reflector systems and prisms," Applied Physics B-Lasers and Optics, 100, 883-890, 2010. (SCI, IF=2.239, Rank=15/78, Q1, Category: Optics)

28. C.Y.Tsai*, "A general calculation and sensitivity analysis of reflector scanning systems using skew ray tracing," Applied Physics B-Lasers and Optics, 98, 481-487, 2010. (SCI, IF=2.239, Rank=15/78, Q1, Category: Optics)

29. C.Y.Tsai*, "A general calculation of the 3-D disk of least confusion using skew ray tracing," Applied Physics B-Lasers and Optics, 96, 517-525, 2009. (SCI, IF=1.992, Rank=13/70, Q1, Category: Optics)

30. C.Y.Tsai* and P.D.Lin, "The mathematical models of the basic entities of multi-axis serial orthogonal machine tools using a modified Denavit-Hartenberg notation," International Journal of Advanced Manufacturing Technology, 42, 1016-1024, 2009. (SCI, IF=1.128, Rank=13/38, Q2, Category: Engineering, Manufacturing)

31. P.D.Lin* and C.Y.Tsai, "Skew ray tracing and sensitivity analysis of ellipsoidal optical boundary surfaces," Applied Mathematical Modelling, 32, 2526-2537, 2008. (SCI, IF=0.931, Rank=25/68, Q2, Category: Engineering, Multidisciplinary)

32. C.Y.Tsai* and P.D.Lin, "Design of optically stable reflector systems and prisms," Applied Optics, 47, 4158-4163, 2008. (SCI, IF=1.763, Rank=18/64, Q2, Category: Optics)

33. P.D.Lin* and C.Y.Tsai, "General method for determining the first order gradients of skew rays of optical systems with non-coplanar optical axes," Applied Physics B-Lasers and Optics, 91, 621-628, 2008. (SCI, IF=2.167, Rank=13/64, Q1, Category: Optics)

34. C.Y.Tsai*, P.D.Lin, and Y.L.Lo, "Prism design for image orientation changes by screw triangle method," Optics Letters, 33, 1081-1083, 2008. (SCI, IF=3.772, Rank=4/64, Q1, Category: Optics)

35. C.Y.Tsai* and P.D.Lin, "The determination of positions and orientations of a prism's surfaces based on image orientation change," Applied Physics B-Lasers and Optics, 91, 105-114, 2008. (SCI, IF=2.167, Rank=13/64, Q1, Category: Optics)

36. C.Y.Tsai* and P.D.Lin, "Analytical solutions for image orientation changes in prisms," Applied Optics, 46, 3087-3094, 2007. (SCI, IF=1.701, Rank=17/64, Q2, Category: Optics)

37. P.D.Lin* and C.Y.Tsai, "First-order gradients of skew rays of axis- symmetrical optical systems," Journal of the Optical Society of America A-Optics Image Science and Vision, 24, 776-784, 2007. (SCI, IF=1.776, Rank=15/64, Q1, Category: Optics)

38. C.Y.Tsai* and P.D.Lin, "Prism design based on changes in image orientation," Applied Optics, 45, 3951-3959, 2006. (SCI, IF=1.717, Rank=13/55, Q1, Category: Optics)

年度 計畫類型 計畫名稱 執行期限 擔任工作 總經費
111 科技部
產學合作
助動自行車高減速比變速行星齒輪系之設計與開發
(MOST 111-2622-E-194-007)
2022/06/01 ~ 2023/05/31 主持人              711,616
111 科技部
一般型
前瞻製造系統頂尖研究中心(5/5)
(MOST 111-2634-F-194-002)
2022/03/01~
2023/02/28
共同主持人         22,000,000
110 企業
委託案
ATC平板凸輪應力分析程式開發
(110-02352-01)
2021/11/01 ~ 2022/10/31 主持人              700,000
110 企業
委託案
ATC滾齒凸輪應力分析程式開發
(110-02124-01)
2021/08/01 ~ 2022/07/31 主持人           1,500,000
110 科技部
一般型
前瞻製造系統頂尖研究中心(4/5)
(MOST 110-2634-F-194-005)
2021/03/01 ~ 2022/02/28 共同主持人         28,000,000
109 科技部
一般型
複合式車削中心機之強力刮齒與滾齒的閉迴路製造之研究
(MOST 109-2221-E-194-013-MY3)
2020/08/01 ~ 2023/07/31 主持人           3,136,000
109 科技部
產學合作
導入最佳化設計於蝸桿蝸輪設計軟體之開發
(MOST 109-2622-E-194-001-CC3)
2020/06/01 ~ 2021/05/31 主持人              726,816
109 科技部
一般型
前瞻製造系統頂尖研究中心(3/5)
(MOST 109-2634-F-194-004)
2020/03/01 ~ 2021/02/28 共同主持人         28,000,000
108 科技部
一般型
前瞻製造系統頂尖研究中心(2/5)
(MOST 108-3017-F-194-001)
2019/03/01 ~ 2020/04/30 共同主持人         30,000,000
108 科技部
一般型
利用標準滾齒刀修正塑膠射出成型齒輪模具的收縮率補償計算與最佳化之研究
(MOST 108-2221-E-150-025)
2019/08/01 ~ 2020/07/31 主持人              748,000
108 科技部
產學合作
導入最佳化設計演算法於齒輪組負載與應力分析之專家系統開發
(MOST 108-2622-E-194-005-CC3)
2019/06/01 ~ 2020/05/31 主持人              610,736
108 企業
委託案
Roller Drive應力分析與設計軟體開發
(108-01426-01)
2019/02/01 ~ 2020/07/31 主持人           2,500,000
108 企業
委託案
Roller Drive五軸加工程式開發
(108-01425-01)
2019/02/01 ~ 2019/08/31 主持人              750,000
107 科技部
一般型
強力刮齒法之刀具設計、切削分析與實作
(MOST 107-2221-E-194-049)
2018/08/01 ~ 2019/07/31 主持人              699,000
107 科技部
產學合作
導入最佳化設計演算法於齒輪組設計之專家系統開發
(MOST 107-2622-E-194-009-CC3)
2018/06/01 ~ 2019/05/31 主持人              640,128
107 企業
委託案
滾齒凸輪五軸加工程式開發
(107-AF-042)
2018/02/01 ~ 2019/01/31 主持人              750,000
106 科技部
一般型
開發新的自由曲面設計方法於TIR透鏡之光學設計
(MOST 106-2221-E-150-014)
2017/08/01 ~ 2018/07/31 主持人              663,000
106 科技部
產學合作
整合強力刮齒刀具設計分析與NC程式後處理於六軸CNC車銑複合機
(MOST 106-2622-E-150-010-CC3)
2017/06/01 ~ 2018/05/31 主持人              540,552
105 科技部
一般型
一種新的自由曲面設計方法應用於汽車LED近光燈的光學設計之研究
(MOST 105-2221-E-150-008)
2016/08/01 ~ 2017/07/31 主持人              777,000
105 科技部
一般型
應用強力刮齒法於車銑複合機之NC程式開發
(MOST 105-2622-E-150-010-CC3)
2016/06/01 ~ 2017/05/31 主持人              568,880
104 科技部
一般型
結合變焦拋物面及變焦雙曲面於複合式太陽能集光模組之設計
(MOST 104-2221-E-150-057)
2015/08/01 ~ 2016/07/31 主持人              653,000
103 科技部
一般型
光學掃描系統之光斑畸變消除與掃描速度分析之研究
(MOST 103-2221-E-150-010)
2014/08/01 ~ 2015/07/31 主持人              690,000
102 國科會
一般型
應用變焦抛物面於太陽能電池集光模組之研究
(NSC 102-2221-E-150-013)
2013/08/01 ~ 2014/07/31 主持人              734,000
101 國科會
一般型
聚光型太陽能電池之集光模組之設計
(NSC 101-2221-E-150-011)
2012/08/01 ~ 2013/07/31 主持人              745,000
100 國科會
產學合作
電力助動自行車LED 車頭燈之光學設計
(NSC 100-2622-E-150-005-CC3)
2011/06/01 ~ 2012/05/31 主持人              495,555
100 國科會
一般型
利用成像位姿變化理論設計與分析六自由度光學量測系統
(NSC 100-2221-E-150-022)
2011/08/01 ~ 2012/07/31 主持人              614,000
99 國科會
產學合作
太陽能加熱系統之集光模組之設計
(NSC 99-2622-E-150-016-CC3)
2010/06/01 ~ 2011/05/31 主持人              765,840
99 國科會
一般型
具多功能之一般型反射式光學3-D掃描系統之研究
(NSC 99-2221-E-150-005)
2010/08/01 ~ 20110/7/31 主持人              683,000
98 企業
委託案
助動自行車扭力感應模組之分析與設計
(98-AD-21)
2009/12/01 ~ 2010/5/31 主持人              100,000
98 國科會
一般型
應用歪斜光線追蹤法於光學系統的焦散面與模糊圓之分析建模及最佳化設計
(NSC 98-2221-E-150-021)
2009/08/01 ~ 2010/07/31 主持人              550,000
97 國科會
一般型
應用歪斜光線追踪於反射式光學穩定系統之分析與設計
(NSC 97-2218-E-150-004)
2008/08/01 ~ 2009/07/31 主持人              525,000