跳到主要內容區
 

鄭榮偉 教授(退休)

4
學歷 加州大學洛杉磯分校 / 美國 / 電機工程 / 博士
專長 控制理論與應用、軟性電子印刷製程與元件
分機 33315
E-mail imecheng@ccu.edu.tw
辦公室 系館523
實驗室 工廠203 機電控制實驗室  |  分機:23359
期刊論文

1. Cheng, J.-W. J.*, Ho, J.-R., Tseng, Y.-W., Su, H.-J., Chien, C.-H., Tsiang, R. C.-C., Hsu, C.-C., Chen, T.-R., Chiang, C.-Y., 12/2012 (SCI) “Block copolymer alignment method for mobility anisotropy and enhancement of poly(3-hexylthiophene) thin-film transistors,” Polym. Eng. Sci., vol. 52, pp. 2581-2587, 2012. (IF:1.302, Q2) NSC 99-2627-E-194-001, 99-2120-M-194-004, 99-2221-E-194- 033-MY2

2. Chang-Jian, S.-K., Ho, J.-R.*, Cheng, J.-W. J., and Hsieh, Y.-P., 04/2012, (SCI expanded) “Characterizations of photoconductivity of graphene oxide thin films,” AIP Advances 2, 022104 (9 pages) 2012. NSC100-2221-E-194 -056 -MY3, NSC100-2676-E-194-001

3. Chang-Jian, S.-K., Ho, J.-R.*, and Cheng, J.-W. J., 10/2011, (SCI) “Fabrication of all-tube p- and n- type carbon nanotube field-effect transistors by laser transfer method,” Lasers in Engineering 21, pp. 281-288, 2011 (IF: 0.159, 2011, Q4) NSC 97-2221-E-194-058-MY3

4. Chang-Jian, S.-K., Ho, J.-R.*, and Cheng, J.-W. J., 07/2011 (SCI), “Fabrication and patterning of carbon nanotube buckypapers using pulsed laser separation,” Applied Physics A – Materials Science & Processing, vol. 105, pp. 691-698, 2011 (IF: 1.765, 2010, Q2) NSC 97-2221-E-194-058-MY3, NSC 98-2627-E-194-001

5. Chang-Jian, S.-K., Ho, J.-R.*, and Cheng, J.-W. J., 05/2011 (SCI) "Fabrication of transparent double-walled carbon nanotubes flexible matrix touch panel by laser ablation technique," Opt. Laser Technol., vol. 43, pp. 1371-1376, 2011 (IF: 1.616, 2010, Q2) NSC 97-2221-E-194-058-MY3 (This work was one of the Journal’s top 25 hottest articles (15/25), http://top25.sciencedirect.com/subject/engineering/12/journal/optics-laser-technology/00303992/archive/33 )

6. Lin, Y.-W. and Cheng, J.-W. J.*, 10/2010. (SCI) “A high gain observer for a class of cascade-feedback connected nonlinear systems with application to injection molding,” IEEE-ASME T. Mech., vol. 15, pp. 714-727, 2010 (IF: 2.577, 2010, Q1) NSC 95-2221-E-194-039-MY3, NSC 98-2221-E-194-052

7. Chang-Jian, S.-K., Ho, J.-R.*, and Cheng, J.-W. J., 06/2010 (SCI) "Characterization of developing source/drain current of carbon nanotube field-effect transistors with n-doping by polyethylene imine," Microelectronic Engineering, vol. 87, pp. 1973-1977, 2010 (IF: 1.575, 2010, Q2) NSC 96-2221-E-194-044, NSC 95-2120-M-194- 003

8. Chen, K.-T., Lin, Y.-H., Ho, J.-R.*, Cheng, J.-W. J., Liu, S.-H., Liao, J.-L., Yan, J.-Y., 04/2010 (SCI) “Laser-induced implantation of silver particles into poly(vinyl alcohol) films and its application to electronic-circuit fabrication on encapsulated organic electronics,” Microelectronic Engineering, vol. 87, pp. 543-547, 2010 (IF: 1.575, 2010, Q2) NSC 95-2221-E-194-052, NSC 95-2120-M-194-003

9. Chang-Jian, S.-K., Ho, J.-R.*, and Cheng, J.-W. J., 03/2010 (SCI) "A flexible carbon nanotube field emitter fabricated on a polymer substrate by a laser separation method," Solid State Communications, vol. 150, pp. 666-668, 2010 (IF: 1.981, 2010, Q2) NSC 95-2221-E-194-052, NSC 95-2120-M-194-003

10. Cheng, J.-W. J.*, Ho, J.-R., Peng, T.-Y., Wu, N.-Y., and Huang, C.-M., 08/2008. (SCI expanded) “Directional spin coating and its feasibility for fabrication of polymeric light emitting diodes,” J. of the Chinese Society of Mechanical Engineers, vol. 29, pp. 341-346, 2008. NSC 95-2221-E-194-039- MY3, NSC 96-2120-M-194-006, NSC 96-2120-M-194- 002

11. Lin, Y.-W. and Cheng, J.-W. J.*, 3/2008. (SCI) “Model-based melt flow virtual sensors for filling process of injection molding,” Polymer Engineering & Science, vol. 48, pp. 543-555, 2008 (IF: 1.245, 2008) NSC 95-2221-E-194-039-MY3

12. Ho, J.-R.*, Shin, T.-K., Cheng, J.-W. J., and Sung, C.-K., Chen, C.-F., 4/2007. (SCI) “A novel method for fabrication of self-alignment double-layer microlens arrays,” Sensors and Actuators A: Physical, vol. 135, pp. 465-471, 2007 (IF: 1.348, 2007) NSC 93-2212-E-194-008, NSC 94-2212-E-194-002.

13. Chang-Jian, S.-K., Ho, J.-R.*, Cheng, J.-W. J., and Sung, C.-K., 2/2006. (SCI) “Fabrication of carbon nanotube field emission cathodes in patterns by laser transfer method,” Nanotechnology, vol. 17, pp. 1184-1187, 2006 (IF: 3.037, 2006) NSC 94-2120-M-194-006

14. Shin, T.-K., Ho, J.-R.*, and Cheng, J.-W. J., 9/2004. (SCI) "A new approach to polymeric microlens array fabrication using soft replica molding," IEEE Photonics Technology Letters, vol. 16, no. 9, pp. 2078-2080, 2004 (IF: 2.353, 2006) NSC 92-2212-E-194-004.

15. Cheng, J.-W. J.*, Chao, T.-C., Chang, L.-H., and Huang, P.-F., 9/2004. (SCI) "A model-based virtual sensing approach for injection molding process," Polymer Engineering & Science, vol. 44, no. 9, pp. 1605-1614, 2004 (IF: 1.414, 2006) NSC 89-2622-E-194-009.

16. Cheng, J.-W. J.* and Wang, Y.-M., 10/2003. (SCI) "Adaptive one-step-ahead control for non-minimum phase systems with input magnitude and rate constraints,” International J. of Control, vol. 76, no. 15, pp. 1508-1515, 2003 (IF: 0.866, 2006) NSC 89-2212-E-194-102.

研討會論文

1. Yu, C.-C., Ho, J.-R.*, Cheng, J.-W. J., Chen, C.-P., and Lin, Y.-M., 06/2012. “A novel liquid iris based on electrowetting technology,” LOPE-C 2012, Large-Area Organic Printed Electronics – Convention, Munich, Germany, June 19-21, 2012

2. Cheng, J.-W. J.*, Ho, J.-R., Jhu, J.-D., Chen, C.-P., and Lin, Y.-M., 06/2011. “A study on inking PDMS stamp of micro-contact printing,” LOPE-C 2011, Large-Area Organic Printed Electronics – Convention, Frankfurt, Germany, June 28-30, 2011

3. Cheng, J.-W. J.*, Chen, M.-T., Ho, J.-R., Hsu, C.-C., Chen, C.-P., and Lin, Y.-M., 06/2011. “Optimal preparation condition of poly(3-hexylthiophene) solution for organic thin-film transistors,” LOPE-C 2011, Large-Area Organic Printed Electronics – Convention, Frankfurt, Germany, June 28-30, 2011

4. Cheng, J.-W. J.*, Ho, J.-R., Jhu, J.-D., Lee, C.-Y., Chen, C.-P., and Lin, Y.-M., 03/2010. “Micro-contact printing of semiconductive, dielectric, and conductive polymers,” PIERS 2010, Progress in Electromagnetics Research Symposium, 22-26 Mar., 2010, Xi’an, China

5. Chen, Y.-H., Ho, J.-R.*, Cheng, J.-W. J., 03/2010. “Fabrication of electrodes for organic field-effect transistors through spin-coating technique with incorporation of surface wettability treatment,” PIERS 2010, Progress in Electromagnetics Research Symposium, 22-26 Mar., 2010, Xi’an, China

6. Cheng, J.-W. J., Chang, F.-M., and Yen, C.-Y., 2006. 12. (EI) “Reduced Order Modeling of Hysteresis in Shape Memory Alloy,” IEEE Conf. on Decision & Control, Dec, 2006. NSC 94-2212-E-194- 003.

7. Cheng, J.-W. J., Lin, Y.-W., Liao, F.-S., 2003. 05. (EI) "Design and analysis of model-based iterative learning control of injection molding process," ANTEC'03, Annual Conf. of Society of Plastic Engineers, Nashville, TN, USA, May 2003, pp. 556-560. NSC 89-2622-E-194-009.

研發專利

1. 鄭榮偉, 林郁偉, 趙子敬, 黃柏峯, 張力航, 12/2011. 射出成型裝置之融膠波前軟體式感測方法, 中華民國專利(發明第I353923號)民100年12月

2. 鄭榮偉, 何正榮, 洪緯璿, 朱家德, 巫翔裘, 林煒淳, 王唯本, 03/2011. 以微接觸印刷技術為主之全彩有機電激發光二極體陣列製程之方法, 中華民國專利(發明第I342077號)民100年3月

3. Cheng, J.-W. J., Lin, Y.-W., Chao, T.-C., Huang, B.-F., and Chang, L.-H. 7/2010, Method of sensing melt-front position and velocity, US Patent (US7,758,780) 7/20/2010

4. Cheng, J.-W. J., Ho, J.-R., Peng, T.-Y., Wu, N.-Y., Huang, C.-M., 2/2010. “Method of fabricating passive matrix organic light emitting diode array,” US Patent (US7,662,426) 2/16/2010

5. 鄭榮偉, 何正榮, 洪緯璿, 朱家德, 巫翔裘, 林煒淳, 王唯本, 12/2009. “一種使用預潤濕技術之建基於物理吸附的微接觸印刷方法,” 中華民國專利(發明第I318334號)民98年12月

6. 何正榮, 鄭榮偉, 宋震國, 張簡相國, 01/2009. “製造奈米碳管圖案之方法,” 中華民國專利(發明第I305194號)民98年1月

7. 鄭榮偉, 何正榮, 彭子洋, 吳南儀, 黃親民, 08/2007. “有機電激發光二極體陣列製作方法,” 中華民國專利(發明第I284992號)民96年8月1日

8. 鄭榮偉, 何正榮, 11/2006. “一種形成線性圖案的方法,” 中華民國專利(發明第I265379號)民95年11月

9. 鄭榮偉, 林郁偉, 11/2003. 射出裝置智慧型疊代學習充填及保壓控制方法, 中華民國專利(發明第196025號)民92年11月

 

瀏覽數:
登入成功