1. J. E. Prussing, Y. K. Lin, and T. N. Shiau, 1984, “Rotor Blade Flap-Lag Stability and Response in Forward Flight in Turbulent Flows”, Journal of American Helicopter Society, Vol. 29, No. 4, pp. 81-87.

2. T. N. Shiau, J. E. Prussing, and Y. K. Lin, 1986, “Fourier Matrix Product with Application to the Rotor Blade Random Vibration”, Journal of Chinese Society of Mechanical Engineers, Vol. 7, No. 4, pp. 217-225.

3. T. N. Shiau and Jon Li Hwang, 1988, “Minimum Weight Design of a Rotor Bearing System with Multiple Frequency Constraints”, ASME Journal of Engineering for Gas Turbine and Power, Vol. 110, No. 4, pp. 592-599.

4. T. N. Shiau and En Kuan Lee, 1989, “The Residual Shaft Bow Effect on Dynamic Response of a Simply Supported Rotor with Disc Skew and Mass Unbalances”, ASME Journal of Vibration, Acoustics, Stress and Reliability in Design, Vol. 111, No, 2, pp. 170-178.

5. T. N. Shiau and Jon Li Hwang, 1989, “A New Approach to the Dynamic Characteristic of Undamped Rotor-Bearing Systems”, ASME Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 111, No. 4, pp. 379-385.

6. T. N. Shiau and Jong-Shing Tong, 1990, “Stability and Response of Rotating Tapered Blades”, ASCE Journal of Aerospace Engineering, Vol. 3, No. 1, pp. 379-385. (Best Paper Award)

7. T. N. Shiau and Jon Li Hwang, 1990, “Optimum Weight Design of a Rotor Bearing System with Dynamic Behavior Constraints”, ASME Journal of Engineering for Gas Turbine and Power, Vol. 112, No. 4, pp. 454-462.

8. T. N. Shiau and A. N. Jean, 1990, “Prediction of Steady State Response of Flexible Mechanical Systems with Nonlinear Constrains”, ASME Journal of Engineering for Vibration, Acoustics, Stress, and Reliability in Design, Vol. 112, No. 4, pp. 501-507.

9. T. N. Shiau and S. J. Chang, 1991, “Optimization of Rotating Blades with Dynamic Behavior Constraints”, ASCE Journal of Aerospace Engineering, Vol. 4, No. 2, pp. 127-144.

10. T. N. Shiau and An Nan Jean, 1991, “Nonlinear Transient Analysis of Large Rotor Dynamic Systems”, ASME Journal of Applied Mechanics, Vol. 58, No. 2, pp. 596-598.

11. Jon Li Hwang and T. N. Shiau, 1991, “An Application of Generalized Polynomial Expansion Method to Nonlinear Rotor Bearing Systems”, ASME Journal of Vibration and Acoustics, Vol. 113, No. 3, pp. 299-308. (Invited Speech in ASME Vibration Conference)

12. T. N. Shiau and J. L. Hwang, 1993, “Generalized Polynomial Expansion Method for the Dynamic Analysis of Rotor-Bearing Systems”, ASME Journal of Engineering for Gas Turbine and Power, Vol. 115, No. 2, pp. 209-217.

13. T. N. Shiau and J. R. Chang, 1993, “Multi-Objective Optimization of Rotor-Bearing System with Critical Speeds Constraints”, ASME Journal of Engineering for Gas Turbine and Power, Vol. 115, No. 2, pp. 246-255.

14. T. N. Shiau, J. L. Hwang, and Y. B. Chang, 1993, “A Study on Stability and Response Analysis of a Nonlinear Rotor System with Mass Unbalance and Side Load”, ASME Journal of Engineering for Gas Turbine and Power, Vol. 115, No. 2, pp. 218-226.

15. Y. Y. Guu, T. N. Shiau, and J. F. Lin, 1994, “The Dynamic Responses and Stability Analyses of a Nonlinear Rotor-Bearing System with Residual Shaft Bow and Disk Skew”, Journal of CSME, Vol. 15, No. 6, pp. 595-605.

16. T. N. Shiau, Y. D. Yu, and C. P. Kuo, 1995, “Vibration and Optimum Design of Rotating Laminated Blades”, International Journal of Composites Engineering Part B, pp. 173-183.

17. T. N. Shiau, G. J. Sheu, and C. D. Yang, 1997, “Vibration and Control of a Flexible Rotor in Magnetic Bearings Using Hybrid Method and H
Control Theory”, ASME Journal of Engineering for Gas Turbine and Power, Vol. 119, No. 3, pp. 178-185.

18. T. N. Shiau, C. P. Kuo, and J. R. Hwang, 1997, “Multiobjective Optimization of a Flexible Rotor in Magnetic Bearings with Critical Speeds and Control Current Constraints”, ASME Journal of Engineering for Gas Turbine and Power, Vol. 119, No. 3, pp. 186-195.

19. T. N. Shiau, J. R. Chang, and S. T. Choi, 1998, “Steady-State Response and Stability of Rotating Composite Blades With Fictional Damping”, ASME Journal of Engineering for Gas Turbine and Power, Vol. 120, No. 1, pp. 131-139.

20. J. S. Rao, T. N. Shiau, and J. R. Chang, 1998, “Theoretical Analysis of Lateral Response Due to Torsional Excitation of Geared Rotors”, Mechanism and Machine Theory, Vol. 33, No. 6, pp. 761-783.

21. J. S. Rao, Y. D. Yu, and T. N. Shiau, 1999, “Transient response of rotating laminated plates with interfacial friction under accelerating conditions”, Journal of Sound and Vibration, Vol. 228, No. 1, pp. 37-50.

22. T. N. Shiau, J. S. Rao, J. R. Chang, and S. T. Choi, 1999, “Dynamic Behavior of Geared Rotors”, ASME Journal of Engineering for Gas Turbine and Power, Vol. 121, No. 3, pp. 494-503.

23. T. N. Shiau, W. C. Hsu and J. R. Chang, 2004, “Dynamic response of a hydrodynamic thrust bearing-mounted rotor”, ASME Journal of Engineering for Gas Turbines and Power, v 126, n 2, April, 2004, p 401-407.

24. T. N. Shiau, W. C. Hsu , and J. R. Chang, 2004,” A Study on Dynamic Parameters Estimation and Response Analysis of a Nonlinear Rotor Thrust Bearing System ,” Journal of the CSME , Vol. 25, No. 3, pp. 1-9.

25. T. N. Shiau, E. C. Chen， K. H. Huang and W. C. Hsu， 2006， “Dynamic Response of a Spinning Timoshenko Beam with General Boundary Conditions Under a Moving Skew Force Using Global Assumed Mode Method”， JSME International Journal of The Japan Society of Mechanical Engineers ，Series C， Vol.49，No.2，pp.401-410.

26. T. N. Shiau, K. H. Huang and W. C. Hsu, 2006, “Dynamic Response and Stability of a Rotating Ball Screw under a Moving Skew Load”, Journal of the Chinese Society of Mechanical Engineers, Vol.27, No.3, pp.297-305.

27. T. N. Shiau, C. H Cheng and M. S. Tsai, 2006, “Development of a Robust Two-Stage System Identification Method for a Rotor-bearing system ”, Journal of the Chinese Society of Mechanical Engineers, Vol. 27, No. 4., pp. 403-413.

28. M. S. Tsai, T. N. Shiau, W. H. Yau and T. H. Chang, 2006, “Lagrangian Approach for the Dynamic Formulation of a 3 PRS Parallel Mechanism”, Journal of Robotic Systems, Vol. 23， No. 2, pp. 219-229.

32. T. N. Shiau, C. H. Cheng and M. S. Tsai, 2007, “Application of Singular Value Decomposition Technique to System Identification by Doping an Optimal Signal”, Journal of the Chinese Society of Mechanical Engineers, Vol. 28, No. 6, pp. 605-616.

33. T. N. Shiau, Y. J. Tsai and M. S. Tsai, 2007, ” The Nonlinear Dynamics Analysis of a Parallel Mechanism with Consideration of Joint Effect”, Mechanism and Machine Theory, Vol. 43, No. 4, pp. 491-505.

34. T.H. Young, T. N. Shiau, Z.H. Kuo, Source, 2007, “Dynamic Stability of Rotor-Bearing Systems Subjected to Random Axial Forces”, Journal of Sound and Vibration, Vol. 305, No.3， p 467-480.

35. T. N. Shiau, Y. J. Tsai, T. C. Yan and M. S. Tsai, 2008, ”Structural Analysis of the 3-PRS Mechanism of a Serial-Parallel Machine Tool”, Journal of the Chinese Society of Mechanical Engineers, Vol. 29, No. 2, pp. 99-109.

36. T. N. Shiau, C.H. Kang and D.S. Liu, 2008, “Multi-Objective Optimal Design of Rotor-Bearing Systems under Dynamic Behavior Constraints Using a Hybrid Genetic Algorithm”, ournal of the Chinese Society of Mechanical Engineers, Vol. 29, No. 3, pp. 187-194.

37. T. N. Shiau, C.H. Kang and D.S. Liu, 2008, “Interval Optimization of Rotor-Bearing Systems with Dynamic Behavior Constraints Using an Interval Genetic Algorithm”， Structural and Multidisciplinary Optimization, Vol. 36, pp. 623–631.

38. T. N. Shiau, C.H. Kang and D.S. Liu, 2008, “The Application of the Interval Genetic Algorithm Technique for the Interval Optimization of a Disk Type Piezoelectric Motor”, Journal of the Chinese Society of Mechanical Engineers, Vol. 29, No. 6, pp. 435-443.

39. T.N. Shiau, K.H. Chen, J.R. Chang, 2008, “Critical Speed Analysis for Nonlinear Effects of Rotor System and Ball End Milling”, Accepted for International Journal of Advanced Manufacturing Technology.

40. T.N. Shiau, K.H. Huang, F.C. Wang, W.C. Hsu, 2009, “Dynamic Response of a Rotating Multi-Span Shaft with Elastic Bearings Subjected to a Moving Load”, Accepted for Journal of System Design and Dynamics, Vol. 3, No. 1, pp. 107-119.

41. T.N. Shiau, K.H. Huang, F.C. Wang, W.C. Hsu, 2009, ” Dynamic Response of a Rotating Multi-Span Shaft with General Boundary Conditions Subjected to a Moving Load”, Accepted for Journal of Sound and Vibration.

42. T.N. Shiau, K.H. Chen, J.R. Chang, M.H. Hung, 2009, “Identification of System Parameters for Ball End Milling”, Accepted for Chinese Society of Mechanical Engineers.

43. T. N. Shiau, C. H. Kang, D. S. Liu, and T. H. Young, 2009, “The Multi-Objective Optimal Design of the Disc Type Piezoelectric Motor with Stability Constraint” , Accepted by Journal of System Design and Dynamics, Japan Society Mechanical Engineering.

44. T. N. Shiau, C. H. Kang, D. S. Liu, and W. C. Hsu, 2009, “Coupled the Interval Genetic Algorithm Technique with Finite Element Method for the Interval Optimization of Structures”, Accepted by Journal of System Design and Dynamics, Japan Society Mechanical Engineering.

45. T. N. Shiau, E. K. Lee, W. C. Hsu, T. H. Young, and C. H. Kang, 2009, “Dynamic Analysis of Gear-Rotor System with Viscoelastic Supports under Residual Shaft Bow Effect,” Submitted to Journal of Sound and Vibration.

46. T. N. Shiau, K. H. Huang, F. C. Wang, K. H. Chen, C. P. Kuo, 2009, “Dynamic Response of a Rotating Ball Screw Subject to a Moving Regenerative Force in Grinding”, Journal of Applied Mathematical Modeling. (Revised)

1. T. N. Shiau, and Chung-Her Yu, 1986, “The Minimum Weight Design of Rotating Pretwisted Cantilevered Beams with Multiple Frequency Constraints”, Proc. of the Second Chinese Mechanical Engineers Conference. Kaohsiung, Taiwan.

2. T. N. Shiau, An Nan Jean, and Jenn Min Lin, 1987, “Optimum Laminate Design under Stiffness and Structural Behavior Constraints”, Proc. of CAAPCON, Houston, TX, USA.

3. T. N. Shiau and Jong-Shing Tong, 1987, “The Effect of Gyroscopic Force on Dynamic Stability and Response of Spinning Tapered Blades”, AIAA Paper No. 87-0737-CP 28th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics & Materials Conference LA, CA,
USA.

4. T. N. Shiau and T. K. Shiue, 1987, “An Efficient Approach to Minimum Weight Design of Structures”, Proc. of the Eleventh Chinese Theoretical and Applied Mechanics Conference. Chungli, Taiwan.

5. T. N. Shiau and S. J. Chang, 1988, “Minimum Weight Design of Rotating Pretwisted Blades with Dynamic Behavior Constraints”, AIAA Paper No. 88-2267 29th AIAA / ASME / ASCE / AHS Structures, Structural Dynamics & Materials, Williamsburg, Virginia, USA.

6. T. N. Shiau and Chih-Chiang Pan, 1988, “Minimum Weight Design of Rotating Pretwisted Tapered Blades”, The Third International Conference on Recent Advances in Structural Dynamics, Southampton, England.

7. T. N. Shiau and S. J. Chang, 1988, “Minimum Weight Design of a Rotating Pretwist Cantilevered Beam under Frequency and/or Dynamic Response Constraints”, International Conference on Computational Engineering Science, Atlanta, Georgia, USA.

8. T. N. Shiau and F jon Li Hwang, 1988, “Minimum Weight Design of a Rotor Bearing System with Multiple Frequency Constraints”, The Thirty-Third ASME International Gas Turbine and Aero-Engine Congress and Exposition, Amsterdam, the Netherlands.

9. T. N. Shiau and An Nan Jean. 1988. “Parameters Identification Using Impulse Response Measurements with Application of Floquet Transition Matrix”, Development in Theoretical and Applied Mechanics-Vol. XIV by the SECTAM ), University of Mississippi, MS, USA.

10. T. H. Young, T. N. Shiau, and S. H. Chiu, 1989, “Effects of Free Damping Layers on Harmonic Response of Rotating Blades”, ASME Paper No. 89-GT-92, The 34th ASME International Gas Turbine and Aeroengine Congress and Exposition, Toronto, Canada.

11. T. N. Shiau, T. Y. Wu, and Y. B. Chang, 1989, “A Comparison of Types of Structural Optimization Procedures With Flutter Constraint”, Presented at the Seventh International Conference on Mathematical and Computer Modeling, Chicago, Illinois, USA.

12. T. N. Shiau and A. N. Jean, 1989, “Prediction of Steady State Response of Flexible Rotor Systems with Nonlinear Supports”, Presented at the Twelfth Biennial ASME Conference of Mechanical Vibration and Noise, Montreal, Canada.

13. T. N. Shiau, J. N. Ke, and F. Y. Chang, 1989, “Optimal Design of Structural System With Multilevel Approach”, Proc. of the Thirteen Chinese Theoretical and Applied Mechanics Conference. Taichung, Taiwan.

14. T. N. Shiau and Jon Li Heang, 1989, “Optimum Weight Design of a Rotor Bearing System with Dynamic Behavior Constraints”, The 34th ASME International Gas Turbine and Aeroengine Congress and Exposition, Toronto, Canada.

15. C. B. Liu and T. N. Shiau, 1990, “Experimental Study and System Indentification of Squeeze-Film Bearing”, The Seventh Chinese Mechanical Engineers Conference. Hsinchu, Taiwan.

16. J.L. Hwang and T. N. Shiau, 1990, “Stability Analysis of a Rotor System With Squeeze Film Dampers”, Proceeding of AASRC, Taipei, Taiwan.

17. J. L. Hwang and T. N. Shiau, 1991, “Generalized Polynomial Expansion Method for the Dynamic Analysis of Rotor-Bearing Systems”, The 13th Biennial Conference on Mechanical Vibration and Noise, Miami, Florida, USA. (Invited Speech)

18. T. N. Shiau and J. L. Hwang, 1991, “Generalized Polynomial Expansion Method for the Dynamic Analysis of Rotor-Bearing System”, The 36th ASME International GAS Turbine and Aeroengine Congress and Exposition, Orlando, Florida, USA.

19. T. N. Shiau and J. R. Chang, 1991, “Multi-Objective Optimization of Rotor-Bearing System with Critical Speeds Constraints”, The 36th ASME International Gas Turbine and Aeroengine Congress and Exposition, Orlando, Florida, USA.

20. T. N. Shiau, J. L. Hwang, and Y. B. Chang, 1992, “A Study on Stability and Response Analysis of a Nonlinear Rotor System with Mass Unbalance and Side Load”, Presented at the 37th ASME International Gas Turbine and Aeroengine Congress and exposition, Cologne, Germany.

21. T. N. Shiau, C. P. Kuo, G. J. Sheu, and P. L. Kuo, 1992, “A Study on New Identification Techniques with Application to Squeeze Film Bearing System”, The 38th ASME International Gas Turbine and Aeroengine Congress and Exposition, Cincinnati, Germany.

22. T. N. Shiau, Y. D. Yu, and C. P. Kuo, 1992, “Optimum Design of Rotating Laminate Blade with Dynamic Behavior Constraints”, The 38th ASME International Gas Turbine and Aeroengine Congress and Exposition, Cincinnati, Ohio, USA.

23. An-Nan Jean and T. N. Shiau, 1992, “A Reduction Method for Stability and Dynamic Response Analysis of Nonlinear Mechanical System”, The 38th ASME International Gas Turbine and Aeroengine Congress and Exposition, Cincinnati, Ohio, USA.

24. T. N. Shiau, 1994,“The Research and Application of Vibration Problem in Rotating Machinery”, Turbine Technology and Application Workshop, Taiwan. (Invited paper)

25. T. N. Shiau, G. J. Sheu, and C. D. Yarig, 1995, “Vibration and Control of a Flexible Rotor in Magnetic Bearings Using Hybrid Method and H Control Theory”, The 39th ASME International Gas Turbine and Aeroengine Congress and Exposition, Hague, the Netherlands.

26. T. N. Shiau, C. P. Sheu, and J. R. Hwang, 1995, “Multiobjective Optimization of a Flexible Rotor in Magnetic Bearings with Critical Speeds and Control Current Constraints”, The 39th ASME International Gas Turbin and Aeroengine Congress and Exposition, Hague, the Netherlands.

27. T. N. Shiau, Y. W. Chou. J. R. Cheng, and H. D. Nelson, 1995, “A Study on the Dynamic Characteristics of Geared Rotor-Bearing System with Hybrid Method”, The 39th ASME International Gas Turbine and Aeroengine Congress and Exposition. Hague, the Netherlands.

28. T. N. Shiau, 1995, “A Survey on the Research and Development of High Speed Spindle in Taiwan”, 中日精密機械關鍵技術研討會, Japan.(Invited paper)

29. 陳政雄、林呈彰、蕭庭郎、劉嘉峰, 1995 , “工具機高速主軸之發展趨勢”, 中國機械工程 研討會, 台北, 中華民國。

30. 蕭庭郎、林呈彰、張俊杰、鄭琦聰, 1995, “高速主軸轉子軸承系統軸向與側向耦合運動分析”, 中國機械工程研討會, 台北, 中華民國。

31. J. S. Rao, J. R. Chang. and T. N. Shiau, 1995, “Coupled Bending—Torsion Vibration of Geared Rotors”, ASME Design Technical Conferences, Boston, Massachusetts, USA.

32. T. N. Shiau and Y. D. YH, 1995, “Friction Damping on the Dynamic Behavior of Composite Blades”, JSROMAC—6, Honolulu, Hawaii, USA.

33. T. N. Shiau, 1995, Workshop on Rotor Dynamics, Unsteady Blade Loading, Blade Heat Transfer and Blade Vibration Machines. (Invited Lecture)

34. T. N. Shiau, Y. D. Yu, J. S. Rao, and S. T. Choi, 1996, “Steady State Response and Stability of Rotating Composite Blades with Frictional Damping”, The 40th ASME International Gas Turbine and Aeroengine Congress and Exposition, Birmingham, England.

35. 林呈影、蕭庭郎、陳勇達, 1996, “高速旋轉申壓縮彈簧變形之理論分析”, 中國機械工程學會第十三屆全國學術研討會, 台北, 中華民國。

36. T. N. Shiau and C. C. Ling, 1996, “Optimum Torque Design of Induction Motor with Constraints on Shaft Stress and Accelerating Time”, Proc. Of the Twentieth Chinese Theoretical and Applied Mechanics Conference. Taipei, Taiwan.

37. T. N. Shiau, C. C. Ling, 1996, “Dynamic Analysis of High Speed Spindle System with Axial Loads”, Proc. of the Twentieth Chinese Theoretical and Applied Mechanics Conference. Taipei, Taiwan.

38. T. N. Shiau, J. S. Rao, J. R. Chang, and S. T. Choi 1997, “Dynamic Behavior of Geared Rotors”, The 41th ASME International Gas Turbine and Aeroengine Congress and Exposition, Orlando, Florida, USA.

39. 林呈彰、蕭庭郎、鐘振周, 1997, “非圓形切削精度追蹤控制”, 中國機械工程學會第十四屆全國學術研討會, 中歷, 中華民國。

40. 林呈彰、蕭庭郎、沈哲民, 1998 , “主軸拉刀力動態量測及探討”, 中國機械工程學會第十五屆全國學術研討會, 台南, 中華民國。

41. J.W.John Cheng, T. N. Shiau, and H. N. Tai, 1999, “Cogging Force Minimization of a Double-Sided PMLSM via Multi-Variable Constrained Optimization”, 16th National conf. on Mechanical Engineering of the Chinese Society of Mechanical Engineers, Hsinchu, Taiwan,Dec 3-4,1999.

42. T. N. Shiau, H. J. Lee, and Y. J. Tsai, 1999, “Multilevel Optimization of Rotor Bearing System with Dynamic Behavior Constraints”, The 45th International Gas Turbine and Aeroengine Congress and Exposition, Munich, Germany.

43. T. N. Shiau, K. S. Hsu and J. R. Chang, 2002, “Dynamic Response of a Hydrodynamic Thrust Bearing-Mounted Rotor”, Proceedings of the ASME TURBO EXPO 2002, Amsterdam, the Netherlands.

44. T. N. Shiau, M. D. Wu and T. H. Yang, 2002, “Sensitivity of Optimum Design of Rotor System with Magnetic Bearing via Multilevel Technique”, Proceedings of the ASME TURBO EXPO 2002, Amsterdam, the Netherlands.

45. T. N. Shiau, M. S. Tsai, and C.H. Chang, 2003, “State Space Identification of Nonlinear Hydrodynamic Bearing by Eigensystem Realization Algorithm (ERA),”International Gas Turbine Institute ASME TURBO EXPO 2003, Atlanta, Georgia, USA.

46. T. N. Shiau, K. S. Hsu, and J. R. Chang, 2003,“Bifurcation of Nonlinear Hydrodynamic Thrust Bearing Mounted Rotor Subjected to Parametric Excitations with Unbalance ” , International Gas Turbine Institute ASME TURBO EXPO 2003, Atlanta, Georgia, USA.

47. T. N. Shiau, E. K. Lee, 2003, “Dynamic Response of Rotor Bearing System under the effect of Residual Shaft Bow Mounted on Viscoelastic Suspensions” , The International Symposium on Stability Control of Rotating Machinery-2, Gdansk, Poland.

48. T. N. Shiau, C.H. Kang, and D. S. Liu, 2004,“Optimization Combines the Genetic Algorithms with Augmented Lagrange Multiplier Method for Rotor-Bearing Systems under Dynamic Behavior Constraints” , International Gas Turbine Institute ASME TURBO EXPO 2004, Vienna, Austria.

49. T. N. Shiau, J.R. Chang, and W. B. Lu, 2004, “Multilevel Optimization of the Geared Rotor-Bearing System for Multi-objectives with Critical Speed Constraints”, International Gas Turbine Institute ASME TURBO EXPO 2004, Vienna, Austria.

50. T. N. Shiau and E. K. Lee, 2005, “Dynamic Analysis of Geared Rotors with Residual Bow and Viscoelastic Suspension”, International Gas Turbine Institute ASME TURBO EXPO 2005, Nevada, USA.

51. T. N. Shiau, W. C. Hsu, 2005, “A Nonlinear Analysis of the Axial Steady State Response of the Hydrodynamic Thrust Bearing-rotor System Subjected to a Harmonic Excitation” , International Gas Turbine Institute ASME TURBO EXPO 2005, Nevada, USA

52. T.N. Shiau, E.K Lee, Y.C Chen and T.H. Young, 2006, ”Dynamic Response of A Geared Rotor-Bearing System under Residual Shaft Bow Effect ”, International Gas Turbine Institute ASME TURBO EXPO 2006, Barcelona, Spain.

53. T. N. Shiau, G. H. Cheng and M. S. Tsai, 2006, “System identification of a rotor system with hydrodynamic bearing by Eigensystem Realization Algorithm (ERA) with an optimum doping signal”, Proceedings of the ASME TURBO EXPO 2006 - Power for Land, Sea, and Air, Barcelona, Spain.

54. T.N Shiau , W.C. Hsu, B.W. Deng , 2007, “Nonlinear dynamic analysis of a rotor system with aerodynamic journal bearings”, Proceedings of ASME TURBO EXPO 2007 Power for Land, Sea, and Air, Montreal, Canada.

55. T. N. Shiau, E. K. Lee, T. H. Young, W.C. Hsu, 2007,” Dynamic Analysis of A Geared Rotor-Bearing System with Viscoelastic Supports under the Bow Effect”, Proceedings of ASME TURBO EXPO 2007 Power for Land, Sea, and Air, Montreal, Canada.

56. T. N. Shiau, K.H. Chen, K.H. Huang, 2008, “Nonlinear Dynamic Behaviors of Rotor Systems for Ball End Milling”, International Gas Turbine Institute ASME TURBO EXPO 2008, Berlin, German.

57. T. N. Shiau, C.H. Kang, D. S. Liu, E. K. Lee, and W. C. Hsu, 2008, “Optimization Design of the Geared Rotor Ssystem with Critical Speed Constraints Using the Enhanced Genetic Algorithm,” International Gas Turbine Institute ASME TURBO EXPO 2008, Berlin, Germany.

58. T. N. Shiau, K. H. Chen, J. R. Chang, 2009, “Vibration Analysis of Rotor-Bearing System for Ball End Milling”, 3rd International Conference on Integrity, Reliability and Failure, Porto, Portugal.

1. 林呈彰、蕭庭郎、陳政雄、鄭友仁, “工具機高速主軸之裝置”, 中華民國新型第121311號。

2. 林呈彰、蕭庭郎、陳政雄、黃以文, “工具機主軸之空氣封改良裝置”, 中華民國新型第135760 號。

3. 郭春寶、蕭庭郎、黃揮原, “連續式之有害廢棄物裂解爐暨焚化爐處理整合系統”, 中華民國發明第176744 號。

4. 郭春寶、蕭庭郎、黃揮原, “裂解爐的氣密構造”, 中華民國新型第221548 號。

1. T.N. Shiau, 1987, “Minimum Weight Design of Wing Structures With Flutter Constrains-I, ” CS75-0401-D006-06.

2. T. N. Shiau, 1988, “Minimum Weight Design of a Rotor System with Critical Speeds Constrains ,“NSC 76- 0401- E006- 06.

3. T. N. Shiau and D. S. Juang, 1989, Minimum Weight Design of Wing Structures With Flutter Constrains-II,“CS76- 0210- D006- 20.

4. T. H. Young and T. N. Shiau, 1989,“A Study of Structural Dynamic Characteristic of Rotating Blades with Free Damping Layers-I,”NSC76-0210-D011-02R.

5. T. H. Young and T. N. Shiau, 1989,“A Study of Structural Dynamic Characteristic of Rotating Blades with Free Damping Layers-II,”NSC76-0210-D011-03.

6. T. N. Shiau, 1989, “Minimum Weight Design of a Rotor System with Critical Speeds Constrains-II ,“NSC 78- 0401- E006- 12.

7. T. N. Shiau and T. H. Young, 1990, Minimum Weight Design of Wing Structures With Flutter Constrains-III,“CS76- 0210- D006- 21.

8. T. N. Shiau, 1990, “Dynamic Response and Stability Analysis of Rotor System with Squeeze Film Bearing,”NSC 79-0401-E006-14.

9. T. N. Shiau, 1991, “Experimental Study and Identification of Rotor System with Squeeze film Bearing,”NSC 80-0401-E006-43.

10. T. N. Shiau, 1992, “A Study on the Application of GPEM for Dynamic Analysis of Multi-Shaft Rotor Bearing System,”NCS 80-0210-D006-14.

11. T. N. Shiau, et al., 1992, “Active-Robust Vibration Control of Rotating Machinery with Unsteady Flow Effect Using DSP-Controlled Magnetic Bearing,”International Research Project.

12. T. N. Shiau and T. C. Young, 1993,“A Study on Dynamic Characteristics of Rotor Bearing Systems in Rotating Machinery,”Report of Power Research Institute,Taipower Co.

13. T. N. Shiau, et al., 1994, “A Study of the Rapid Prototyping with the Application to Die and Mold Manufacturing,”NSC 82-0420E194-042.

14. T. N. Shiau and C. P. Kuo, 1994,“A Study on the Rotor Dynamic Behaviors of Turbo Engine(  ),” NSC 82-0401-D-194-001.

15. T. N. Shiau, 1995, “A Study on Dynamic Characteristics of Geared Rotor Bearing System,” NSC 84-2212-E-194-001.

16. T. N. Shiau, and C. P. Kuo,1994, “A Study on the Rotor Dynamic Behaviors of Turbo Engine(   )” NSC 84-2623-D-194-001.

17 C.C. Ling, T. N. Shiau, et. al.,1995, “A Study on the Research and Development of High Speed Spindle (  ), ”NSC 84-2622-E-194-004.

18 T. N. Shiau, et. al.,1995, “A Study of the Rapid Prototyping with the Application to Die and Mold Manufacturing,” NSC 83-0422-E-194-007;NSC83-0681-E-194-002

19. T. N. Shiau, 1996, “Axial and Lateral Coupled Motion of a Rotor with Thrust Bearing” NSC 85-2212-E-194-006.

20 T. N. Shiau and C. P. Kuo 1996, “A Study on the Rotor Dynamic Behaviors of Turbo Engine (    ).”CS 85-0210-D-194-002.

21.C. C. Ling, T. N. Shiau, et. al., 1996, “A Study on the Research and Development of High Speed Spindle(   ).” NSC 85-2622-E-194-00IR

22. T. N. Shiau, et.al.,1996, “A Study of the Rapid Prototyping with the Application to Die and Mold Manufacturing (   ),” NSC84-2212-E-194-010.

23. T. N. Shiau, 1997, “ 旋轉層板葉片在摩擦阻尼效應下之動態分析,” NSC86-2212-E-194-002

24. T. N. Shiau,1998,“交流馬達轉子軸承系統之動態分析,” NSC87-2212-E-194-016

25. T. N. Shiau, 1998, “Dynamic Analysis of High Speed Spindle System with Lateral and Axial Magnetic Bearings,” NSC88-2212-E-194-

26. T. N. Shiau, 1999, “產學合作:CNC 工具機高速高精度進給技術之研發(1/3),” NSC88-2622-E-194-003

27. T. N. Shiau, 1999, “ 高速主軸磁浮軸承系統之最佳化設計與實驗分析,” NSC88-2212-E-194-026

28. T. N. Shiau, 2000, “旋轉軸於移動斜向負載下之動態分析,” NSC89-2212-E-194-036

29. T. N. Shiau, 2000, “ 諧和平衡法用於超音波馬達之系統動態分析,” NSC 89-2212-E-194-037.

30. T. N. Shiau, 2001, “大域模態假設法應用於轉軸於移動斜向負載下之動態分析,” NSC90-2212-E-194-020

31. T. N. Shiau, 2001, “倍力拉力機之改善研究” 至光工具股份有限公司。

32. T. N. Shiau, 2001, “鍛造用棘輪螺絲起子之改良” 防震力興業股份有限公司。

33. T. N. Shiau, 2001, “高分子材料製程改良” 亞竹企業股份有限公司。

34. T. N. Shiau, 2001, “棘輪扳手之改良研究” 祥雲股份有限公司。

35. T. N. Shiau, 2001, “鋸子及其配件之改良研究” 久允工業股份有限公司。

36. T. N. Shiau, 2001, “訂書機之改良研究” 豐民金屬工業股份有限公司。

37. T. N. Shiau, 2001, “活動扳手之改良”.伯鑫工具股份有限公司。

38. T. N. Shiau, 2002, “串並聯式機構之系統鑑別與振動控制(I),” NSC91-2212-E-194-032

39. T. N. Shiau, 2002, “工具機工作台動態分析及結構最佳化” 財團法人金屬工業研究發展中心。

40. T. N. Shiau, 2002, “水箱壓力測漏檢視改良” 祥雲股份有限公司。

41. T. N. Shiau, 2002, “倍力拉力機之改善( II )” 至光工具股份有限公司。

42. T. N. Shiau, 2002, “汽車排放戴奧辛污染分析,” NSC91-FA13-03-91A221.

43. T. N. Shiau, 2002, “工具機工作臺結構最佳化計劃” 財團法人金屬工業研究發展中心。

44. T. N. Shiau, 2003, “平腳針概念機構” 豐民金屬工業股份有限公司。

45. T. N. Shiau, 2003, “車輛結構受動態外力作用下之暫態與穩態響應分析與系統最佳化設計” 財團法人車輛研究測試中心。

46. T. N. Shiau, 2003, “逃生設備研究計畫書” 至光工具股份有限公司。

47. T. N. Shiau, 2003, “高鋒工業股份有限公司進駐中部科學園區營運計畫” 高鋒工業股份有限公司。

48. T. N. Shiau, 2003, “應用拓樸最佳化方法於工具機工作平台結構輕量化設計” 金屬工業研究發展中心。

49. T. N. Shiau, 2003, “串並聯式機構之系統鑑別與振動控制(II),” NSC92-2212-E-194-033

50. T. N. Shiau, 2003, “套筒功能改良” 祥雲股份有限公司。

51. T. N. Shiau, 2004, “車輛結構受動態外力作用下之暫態與穩態響應分析與系統最佳化設計” 財團法人車輛研究測試中心。

52. T. N. Shiau, 2004, “手工具之改良研究計劃計畫書” 伯鑫工具股份有限公司。

53. T. N. Shiau, 2004, “鋸配件之改良” 久允工業股份有限公司。

54. T. N. Shiau, 2004, “結合遺傳演算法與增廣拉格朗日乘數法於轉子軸承系統在動態特性限制下系統最佳化設計,” NSC93-2212-E-194-020

55. T. N. Shiau, 2004, “逃生設備&手拉器” 至光工具股份有限公司。

56. T. N. Shiau, 2004, “螺絲起子功能改良” 祥雲工業股份有限公司。

57. T. N. Shiau, 2005, “B 系列門型中心機結構分析” 匠澤機械股份有限公司。

58. T. N. Shiau, 2005, “主軸單元量測與紀錄” 發得科技股份有限公司。

59. T. N. Shiau, 2005, “螺絲起子改良研究計畫” 東立工業股份有限公司。

60. T. N. Shiau, 2005, “手拉器輕量化” 至光工具股份有限公司。

61. T. N. Shiau, 2005, “倍力機構設計” 祥雲工業股份有公司。

62. T. N. Shiau, 2005, “在轉速限制下具非線性動能特性之碟型壓電馬達多目標最佳化設計” ,NSC94-2221-E-194-015

63. T. N. Shiau, 2005, “專利翻譯,Pro-E 產品動畫,創意研發” 伯鑫工具股份有限公司。

64. T. N. Shiau, 2006, “具撓性接頭與接頭間隙之串並聯式工具機動態特性分析與最佳化設計,”NSC95-2221-E-194-008.

65. T. N. Shiau, 2006, “手搖式發電機” 祥雲工業股份有公司。

66. T. N. Shiau, 2007, “螺桿受研磨切削力之動態分析” 上銀科技股份有限公司。

67. T. N. Shiau, 2007,”具油膜軸承高速主軸系統在球銑刀切削下之動態行為及參數鑑別”,NSC96-2221-E-194-049

68. T. N. Shiau, 2008,”具跟隨中心架支撐之轉軸在車削下之參數鑑別及外徑誤差模擬”, NSC97-2221-E-194-017

69. T. N. Shiau, 2009,” 齒條刀具創成之時變剛性於多齒對嚙合系統之分歧和混沌行為研究”, NSC98-2221-E-194-010