(設計組)馮展華 講座教授

2
學歷 國立交通大學 / 中華民國 / 機械工程 / 博士
專長 齒輪原理與製造、機械設計及製造實務、 電腦輔助機構設計、最佳化理論
分機 33303
E-mail imezhf@ccu.edu.tw
辦公室 系館423
實驗室 系館533A 精密傳動實驗室  | 分機:23331
個人連結 個人網頁連結
期刊論文

1. C.B. Tsay., Z.H. Fong., “Characteristic Study of Helical Gears with Pinion Circular Arc Teeth and Gear Involute Teeth,”中國機械工程學刊,第九卷第三期, p. 199-206. (EI)

2. C.B. Tsay., Z.H. Fong., 1989, ” The Mathematical Model of Wildhaber- Novikov Gears Applicable to Finite Element Stress Analysis,” Mathematical and Computer Modelling.,Vol. 12, No. 8, p. 939-946.(SCI)

3. C.B. Tsay., Z.H. Fong., 1989, “Tooth Contact Analysis for Helical Gears with Pinion Circular Arc Teeth and Gear Involute Shaped Teeth,” Trans. of ASME, Journal of Mechanism, Transmissions, and Automation in Design.,Vol. 111, No. 2 ,p. 278-284. ( SCI, EI)

4. Z.H. Fong., C.B. Tsay., 1990, “Tooth Contact Analysis of Spiral Bevel Gears,” 中國機械工程學刊, 第十一卷第六期, p. 538-544. (EI)

5. C.B. Tsay., Z.H. Fong., 1991, “Computer Simulation and Stress Analysis of Helical Gears with Pinion Circular Arc Teeth and Gear Involute Teeth,” Mechanism and Machine Theory ,Vol. 26 ,No. 2, p. 145-154. (SCI, EI)

6. Z.H. Fong., C.B. Tsay., 1991, “A Study on the Tooth Geometry and Cutting Machine Mechanisms of Spiral Bevel Gears,” Trans. of ASME, Journal of Mechanical Design, Vol. 113 , p. 346-351 September. (SCI, EI)

7. Z.H. Fong., C.B. Tsay., 1991, “A Mathematical Model for the Tooth Geometry of Circular-Cut Spiral Bevel Gears,” Trans. of ASME, Journal of Mechanical Design., Vol. 113 June, p. 174-181. (SCI, EI)

8. Z.H. Fong., C.B. Tsay., 1992, “Kinematical Optimization of the Spiral Bevel Gears,” Trans. of ASME, Journal of Mechanical Design. ,Vol. 114, September, p. 498-506. (SCI, EI)

9. Z.H. Fong., C.B. Tsay., 1992, “The Undercutting of Circular-Cut Spiral Bevel Gears,” Journal of Mechanical Design ,vol.114,p. 317-325 June

10. Chung-Yunn Lin, C.B. Tsay., and Zhang-Hua Fong., 1996, “Contact Pattern Development of Spiral C302 共 10 頁 ,第 2 頁 Bevel and Hypoid Gears by Applying Optimization Techniques,” Journal of the Chinese Society of Mechanical Engineers, Vol. 17, No. 5 ,p. 413~424. (EI)

11. Chung-Yunn Lin, C.B. Tsay., and Zhang-Hua Fong., 1996, “Tooth Contact Analysis of Hypoid Gears,” Journal of the Chinese Society of Mechanical Engineers, Vol. 17, No. 3 p. 241~249. (EI)

12. Hou, Y.C., S.H. Su., C.H. Tseng, and Z.H. Fong., 1996, “An efficient Optimum Design Procedure for Bicycle Rear Derailleurs,” International Journal of Vechicle Design., Vol. 17, No. 4 ,p. 483-502. (EI) .國科會計畫編號NSC 82-0401-E009-085

13. Hou, Y.C., S.H. Su., C.H. Tseng, Z.H. Fong., 1996, “A Systematic Optimum Design Procedure for Bicycle Rear Derailleurs,” Journal of Applied Mechanisms and Robotics.

14. Wang, C.C., C.H. Tseng., and Z.H. Fong., 1996, “A Method for Improving Bicycle Shifting Performance,” International Journal of Vehicle Design ,Vol. 17, No. 5 ,p. 100~117. (EI) .國科會計畫編號NSC 83-0401-E009-102

15. Chung-Yunn Lin., C.-B.T., and Zhang-Hua Fong., 1997, “Mathematical Model of Spiral Bevel and Hypoid Gears Manufactured by the Modified Roll Method,” Mechanism and Machine Theory ,Vol 32, No.2, p. 121-136. (SCI, EI)

16. C.C. Wang., Y.C Hou., C.H. Tseng., Z.H. Fong., 1997, “Design opyimization and applications in bicycle derailleur systems,” Design Optimization With Application in industry Vol.227p205-214

17. Chung-Yunn Lin., C.-B.T., and Zhang-Hua Fong., 1998, “Computer-Aided Manufacturing of Spiral Bevel and Hypoid Gears with Minimum Surface Deviation,” Mechanism and Machine Theory ,Vol. 33, No. 6 ,p. 785-803. (SCI, EI)

18. T.Y. Lin., C.H.T., and Z.H. Fong., 1998, “An Experimental Approach Characterizing Rear Bicycle Derailleur Systems Part II: the Stability Region and its Applications,” Int. J. of Vehicle Design, Vol. 19, No.3, p. 371~384. (EI), 國科會計畫編號NSC 85-2622-E007-012

19. Z.H. Fong., 2000, “Mathematical Model of Universal Hypoid Generator with Supplemental Kinematic Flank Correction Motions,” Trans. of ASME, Journal of Mechanical Design ,Vol. 122 March ,p. 136-142. (SCI, EI)

20. Z.H. Fong., C.W. Tsay., 2000, “Study on the Undercutting of Internal Cycloidal Gear with Small Tooth Difference,” Journal of the Chinese Society of Mechanical Engineers ,Vol. 21, No. 4 August ,p. 359-367. (EI)

21. Fong, Z.-H., Huang, F-C., and Fang, H-S., 2001, “Evaluating the Inter-lobe Clearance of Twin-Screw Compressor by the Iso-Clearance Contour Diagram (ICCD),” Mechanism and Machine Theory. , 36, p. 725-742.

22. Chung-Yunn Lin., Chung-Biau Tsay., Zhang-Hua Fong., 2001, “Computer-aided manufacturing of spiral bevel and hypoid gears by applying optimization techniques,” Journal of Materials Processing Technology,114,p22-35

23. Wang, P-Y., Fong, Z-H., and Fang, H-S., 2002, “Study on the Design Constraints of Five-Arc Root’s Vacuum Pump,” Proc. - Inst. Mech. Eng., C, J. Mech. Eng. Sci., 216, pp. 225-234. (SCI, EI). 工研院計畫 C302 共 10 頁 ,第 3 頁

24. Fong, Z-H., Chiang, T-W., and Tsay, C-W., 2002, “Mathematical Model for Parametric Tooth Profile of Spur Gear Using Line of Action,” Math. Comput. Model., 36( 4-5), pp. 603-614. (SCI, EI)

25. Lee, J-K., Chen, C-K., and Fong, Z-H., 2002, “Mathematical Model of Curvature Analysis for Conjugate Surfaces with Generalized Motion in Three Dimensions,” J. Mech. Eng. Sci., 215, pp.487-502. (SCI, EI).

26. Jeng, Y-R., Hwang, S-J., Fong, Z-H., Shieh, J-A., 2002, “The Effects of Adding Molybdenum Dithiocarbamate Additive to a Sulfur-Phosphorus Gear Oil on Two Roller Apparatus Performance,” Lubrication Engineering 58 (2): 9-15 Feb. (SCI)

27. Wang, P-Y., and Fong, Z-H., 2005, “Adjustability Improvement of Face-Milling Spiral Bevel Gears by Modified Radial Motion (MRM) Method,” Mech. Mach. Theory, 40 pp. 69-89. (SCI). 國科會計畫編號 NSC 93-2622-E-194-002.

28. Tsay, M-F., and Fong, Z-H., 2005, ”Study on the Generalized Mathematical Model of Non-Circular Gears,” Math. Comput. Model., 41, pp. 555-569. (SCI, EI).

29. Wang, P-Y., and Fong, Z-H., 2005, “Mathematical Model of Face-Milling Spiral Bevel Gears with Modified Radial Motion (MRM) Correction,” Math. Comput. Model., 41, pp. 1307-1323. (SCI, EI). 國科會計畫編號 NSC 93-2622-E-194-002.

30. Wang, P-Y., and Fong, Z-H., 2006, “Fourth-Order Kinematic Synthesis for Face-Milling Spiral Bevel Gears with Modified Radial Motion (MRM) Correction,” ASME J. Mech. Des., 128, pp. 457-467. (SCI, EI). 國科會計畫編號 NSC 94-2622-E-194-001.

31. Fong, Z.H. and Huang, F.C., 2006 , “Evaluating the Interlobe Clearance and Determining the Sizes and Shapes of All the Leakage Paths for Twin-Screw Vacuum Pump,” Proc. - Inst. Mech. Eng., C, J. Mech. Eng. Sci., 220, pp. 499-506. (SCI)

32. Hsu, R-H., and Fong, Z-H., 2006, “Theoretical and Practical Investigations Regarding the Influence of the Serration’s Geometry and Position on the Tooth Surface Roughness by Shaving with Plunge Gear Cutter,” Proc. - Inst. Mech. Eng., C, J. Mech. Eng. Sci., 220 (2), pp. 223-242 (SCI, EI).

33. Fong, Z-H., and Hsu, R-H., 2006, “Topographic Error Analysis of Gear Plunge-Shaving Cutter Finished by Cone Grinding Wheel,” J. Chin. Inst. Eng., 29(3), pp. 481-491. (SCI).

34. Shih, Y-P., and Fong, Z-H., 2007, “Mathematical Model for a Universal Face Hobbing Hypoid Gear Generator,” ASME J. Mech. Des., 129(1), pp. 38-47. (SCI, EI). 國科會計畫編號 NSC 93-2212-E-194-016.

35. Shih, Y-P., and Fong, Z-H., 2007, “Flank Modification Methodology for Face-Hobbing Hypoid Gears Based on Ease-Off Topography,” ASME J. Mech. Des., 129(2), pp. 1294-1302 (SCI, EI). 國科會計畫編號 NSC 94-2212-E-194-006.

36. Tsay, M-F. and Fong, Z-H., 2007, “Novel Profile Modification Methodology for Molded Face-Gear Drives,” Proceedings of the I MECH E Part C Journal of Mechanical Engineering Science, 221(6), pp. 715-725(11). (SCI, EI)

37. Wu, Y-R., and Fong, Z-H., 2008, “Improved Rotor Profiling Based on the Arbitrary Sealing Line for Twin Screw Compressors,” Mech. Mach. Theory, 43(6), pp.695-711. (SCI, EI). C302 共 10 頁 ,第 4 頁

38. Wu, Y-R. and Fong, Z-H., 2008, “Rotor Profile Design for the Twin–Screw Compressor Based on
the Normal–Rack Generation Method,” ASME J. Mech. Des., 130, pp.042601-1~044501-5. (SCI, EI). 經濟部技術處計畫編號94-EC-17-A-05-I1-0006.

39. Shih, Y-P., and Fong, Z-H., 2008, “Flank Correction for Spiral Bevel and Hypoid Gears on a Six-Axis CNC Hypoid Gear Generator,” ASME J. Mech. Des., 130(6), 062604. (SCI, EI). 國科會計畫編號 NSC 95-2221-E-194-057.

40. Wang, W-S, and Fong, Z-H., 2008, “A Dual Face-Hobbing Method for the Cycloidal Crowning of Spur Gears,” Mech. Mach. Theory, 43(11), pp.1416-1430. (SCI, EI). 國科會計畫編號 NSC 95-2622-E-194-006.

41. Hsieh, C.-F., Hwang, Y.-W., Fong, Z.-H., 2008, “Study on the tooth profile for the screw claw-type pump,” Mech. Mach. Theory, 43(7), pp. 812-828. (SCI, EI)

42. Huang C.-L., Fong Z.-H., Chen S.-D., and Chang K.-R., Feb. 2009, “Profile correction of a helical gear shaping cutter using the lengthwise-reciprocating grinding method,” Mech. Mach. Theory, 44(2), pp. 401-414. (SCI, EI) . 國科會計畫編號 NSC 96-2628-E-194-003-MY3

43. Wu, Y.-R., Fong, Z.-H., 2009, “Optimization design of an explicitly defined rack for the generation of rotors for twin-screw compressors,” Vol. 44(1), pp. 66-82, Mech. Mach. Theory. (SCI, EI).

44. Chiang, C -J. and Fong, Z-H., 2009, “Computerized Simulation of Thread Form Grinding Process”, Mech. Mach. Theory. 44(4), pp. 685-696 (SCI, EI). 工研院計畫編號 94-EC-17-A-05-I1-0006.

45. Chiang, C -J. and Fong, Z-H., 2009, “Undercutting and Interference for Thread Form Grinding with a Tilt Angle,” Mech. Mach. Theory, 44(11), pp.2066-2078. (SCI, EI).

46. Huang, C -L. Fong, Z-H., Chen S-D, and Chang K-R, 2009, “Novel Third-Order Correction for a Helical Gear Shaping Cutter Made by a Lengthwise-Reciprocating Grinding Process,” ASME J. Mech. Des., 131(5), 051008 (SCI, EI).

47. Wu Y.-R., Fong Z.-H., Zhang R., 2010, “Simulation of a Cylindrical Form Grinding Process by the Radial- Ray Shooting (RRS) Method,” Mech. Mach. Theory,45(2), pp.261-272 (SCI, EI)

48. Wei-Shiang Wang., and Z.H. Fong., 2009, “Undercutting and Contact Characteristics of Longitudinal Cycloidal Spur Gears Generated by the Dual Face-Hobbing Method,” ASME J. Mech. Des., 132(3), 031008 (SCI, EI)

49. Ruei-Hung Hsu, and Z.H. Fong, 2010, “Even Contact Design for the Plunge Shaving Cutter,” Mech. Mach. Theory.45(8), pp.1185-1200 (SCI, EI)

50. Ruei-Hung Hsu., and Z.H. Fong., 2010, “An analysis of auxiliary crowning in parallel gear shaving,” Mech. Mach. Theory.45(9),PP.1298-1313 (SCI, EI)

51. Wei-Shiang Wang., and Z.H. Fong., 2010, “Tooth Contact Analysis of Longitudinal Cycloidal-Crowned Helical Gears with Circular Arc Teeth,” ASME, Journal of Mechanical Des., 132(3) 031008 (SCI, EI)

52. Chin-Lung Huang, and Z.H. Fong, 2010, “Modify Roll Profile Correction for the Gear Shaping Cutter Made by the Lengthwise-Reciprocating Grinding Process,” submitted to ASME, Journal of C302 共 10 頁 ,第 5 頁 Mechanical Design. (SCI, EI)

53. Ruei-Hung Hsu, and Z.H. Fong, 2010, “Serration Design for a Gear Plunge Shaving Cutter,” submitted to ASME, J. Manuf. Sci. Eng. (SCI, EI)

54. Chiang, C -J. Fong, Z-H, and Chang, K.L., 2010, “Generating Simulation of 3D Gears by Using Object ARX,” Accepted by the Institution of Mechanical Engineers, Part B, Journal of Engineer Manufacture. (Accepted; SCI/EI).

55. Chiang, C -J. Fong, Z-H, 2010, “Design of Form Milling Cutters with Multiple Inserts for Rotor Manufacture,” Accept by Mach. Theory. (SCI, EI)

研討會論文

1. 吳召信、王培郁、馮展華,民國91 年11 月,“壓縮機效率改善之研究”,凸輪及齒輪傳動機構,第五屆全國機構與機器設計學術研討會,第206~213 頁,高雄市。

2. 吳育仁、歐冠吟、陳冠宏、馮展華,民國91 年11 月,“NGW 型行星齒輪系裝配誤差對背隙之影響” ,凸輪及齒輪傳動機構,第五屆全國機構與機器設計學術研討會,高雄應用科技大學。

3. 廖書賢、王培郁、馮展華,民國91 年12 月,“自行車機械矽碟式煞車之設計方法研究(part 1)”,中國機械工程學會第十九屆學術研討會,虎尾技術學院。

4. 廖書賢、丁弘光、馮展華,民國91 年12 月,“自行車機械矽碟式煞車之設計方法研究(part 2)”,中國機械工程學會第十九屆學術研討會,虎尾技術學院。

5. 馮展華、謝秋帆,民國91 年12 月,“螺旋爪式壓縮機齒輪之研究”,中華民國第二十六屆全國力學會議,雲林虎尾。

6. 馮展華、丁弘光,民國 92 年6 月”,創意設計與專利迴避-以自行車碟式煞車為例” ,工程創造力推動經驗交流研討會,台北市。

7. 謝秋帆、馮展華,民國92 年12 月,“擺線減速器齒輪之研究”,中國機械工程學會第十八屆學術研討會,國立台灣科技大學。

8. 王培郁、馮展華,民國92 年12 月,“Mathematical Transformation Universal Hypoid Generator to Six-Axis CNC Hypoid Generator”, 第六屆全國機構與機器設計學術研討會,第360~366 頁,虎尾技術學院。

9. 吳育仁、馮展華、賴欣池,民國94 年11 月,“齒條創成雙螺桿壓縮機轉子線形之研究”,第七屆全國機構與機器設計學術研討會,第 261-298 頁,台南崑山科技大學。(全國最佳論文獎)

10. 陳冠宏、馮展華、謝仁桂,民國94 年12 月,“多牙口滾刀刃口線數學模式建立與加工齒輪的齒型誤差分析",第八屆全國機構與機器設計學術研討會,第358-365 頁,台北科技大學。

11. Shih, Y-P., and Fong, Z-H., 2006, “Flank Modification of Hypoid Gear Based on the Lapped Ease-Off Topography,” Proce. Intermational Conference on Mechanical Teansmission, Chonging, pp. 330-337.

12. 吳育仁、馮展華、顏立永,民國95 年11 月,“基於齒直角齒條創成法(NRGM)之雙螺桿轉子及加工刀具”,第九屆全國機構與機器設計學術研討會,第657-664 頁,高雄正修科技大學。(全國最佳論文獎)C302 共 10 頁 ,第 6 頁

13. 江啟榮、馮展華、張凱倫,民國95 年11 月,“圓柱齒輪成形切削模擬之研究”,中國機械工程學會第二十三屆全國學術研討會,第C-CI 冊,第 7-12 頁,台南崑山科技大學。

14. Shih, Y-P., and Fong, Z-H., Nov 2007 “Flank Correction for Spiral Bevel and Hypoid Gears on a Six-Axis CNC Hypoid Gear Generator,” IMECE, Seattle, Washington.

15. 陳冠宏、陳重儒、馮展華,民國98 年11 月,“數控滾齒機滾齒製程之電腦數值模擬”,第十二屆全國機構與機器設計學術研討會,第154-161 頁,國立中正大學。

16. 吳育仁、馮展華、張政翔、林怡廷、鄭名富,民國98 年11 月,“應用數值解法(RRS)於圓柱型成形磨齒加工之模擬”,第十二屆全國機構與機器設計學術研討會,第349-356 頁,國立中正大學。

研發專利
類別 專利名稱 國別 專利號碼 發明人 專利權人 專利
核准日期
1.(B) 自行車調速桿裝置 中華民國 87229 馮展華
康健群
工研院 1993.11.11~
2003.11.10
2.(B) 自行車變速系統之自動測試機 中華民國 88719 馮展華
何展效
彭永振
魏阿進
工研院 1994.1.1~
2003.12.31
3.(A) 自行車多段鏈輪組齒盤之修整方法及其結構 中華民國 68060 馮展華
嚴昌道
曾錦煥
王傳承
蔡忠杓
工研院 1994.9.21~
2013.12.2
4.(A) Shift Lever Apparatus for Use in Bicycle 美國 US5361645 馮展華
蔡政展
工研院 1994.11~
2014.11
5.(A) Two Sprocket Tooth Triming Methods and the Structure Thereof for the Multi-Stage Sprocket Assembly in a Bicycle 美國 US5409422 馮展華
曾錦煥
王傳承
蔡忠杓
嚴昌道
工研院 1995.4~
2012.4
6.(A) Two Sprocket Tooth Triming Methods and the Structure Thereof for the Multi-Stage Sprocket Assembly in a Bicycle 歐洲 EP00671316B1
EP00671316A1
BR9401865
馮展華
曾錦煥
王傳承
蔡忠杓
嚴昌道
工研院 1995.4~
2012.4
7.(B) 旋轉式自行車調速裝置 中華民國 107048 黃文翰
馮展華
強忠萍
工研院 1995.11.1~
2007.1.26
8.(A) 創程式鉋刀之製造方法 中華民國 75858 陳士端
馮展華
強忠萍
蔡政展
工研院 1995.12.11~
2013.1.12
9.(B) 自行車擋位顯示器 中華民國 113214 黃文翰
馮展華
強忠萍
工研院 1996.6.1~
2007.8.15
10.(B) 自行車後變速器 中華民國 115343 強忠萍
馮展華
黃文翰
工研院 1996.7.21~
2007.9.20
11.(B) 自行車變速裝置 中華民國 119421 黃文翰
黃郁明
馮展華
工研院 1996.12.11~
2007.8.21
12.(A) Rotary Shifter for Bicycle 美國 US5588331 黃文翰
強忠萍
馮展華
工研院 1996.12~
2017.1
13.(B) 自行車變速桿裝置 中華民國 122246 黃文翰
馮展華
強忠萍
黃郁明
工研院 1997.3.1~
2007.9.20
14.(A) Bicycle Speed Indicator 美國 US5632226 黃文翰
馮展華
強忠萍
工研院 1997.5~
2007.5
15.(B) 自行車緊湊飛輪本體結構 中華民國 128876 馮展華
曾錦煥
蘇士豪
國科會 1997.8~
2008,1
16.(A) Gear Shifting Device for a Multi-Speed Bicycle 美國 US5660083 黃文翰
黃郁明
馮展華
工研院 1997.8~
2014.7
17.(A) Speed Change Lever Apparatus for Use in Bicycles 美國 US5673594 黃文翰
強忠萍
馮展華
黃郁明
工研院 1997.10~
2007.10
18.(A) Trimmverfahren für zwei Zahnräder und daraus hergestellte Struktur eines mehrstufigen Kettenrades für ein Fahrrad 德國 DE69422603 黃文翰
強忠萍
馮展華
黃郁明
工研院 1997.10~
2007.10
19.(A) Speed Change Lever Apparatus for Use in Bicycles 歐洲 EP00671316 黃文翰
強忠萍
馮展華
黃郁明
工研院 1997.10~
2007.10
20.(A) New Type of the Compact Freewheel Body for Bicycles 美國 US5704859 馮展華
曾錦煥
蘇士豪
國科會 1998.6~
21.(A) Rear Derailleur for Use in Bicycles 美國 US5865698 黃文翰
強忠萍
馮展華
工研院 1999.2~
2019.2
22.(B) 握把式自行車變速裝置 中華民國 161713 馮展華
李俊育
國科會 2000.7.21~
2011.4.22
23.(B) 雙螺旋轉子總成 中華民國 162846 方宏聲
馮展華
王漢聰
蔡政展
陳俊宏
陳明豐
工研院 2000.8.1~
2011.5.6
24.(B) 一種握把式自行車變速裝置 中華民國 178180 馮展華
王仁傑
顏詒超
曾德生
國科會 2001.8.1~
2012.5.3
25.(B) 速度控制裝置 中華民國 177840 馮展華
王仁傑
國科會 2001.8.1~
2012.5.18
26.(A) Double Screw Rotor Assembly 美國 US6176694 H-S. Fang
Z-H. Fong
H-T. Wang
C-C. Tsai
J-H. Chen
M-F. Chen
工研院 2001.1~
2021.1
27.(A) Double Screw Rotor Assembly 英國 GB2352777 H-S. Fang
Z-H. Fong
H-T. Wang
C-C. Tsai
J-H. Chen
M-F. Chen
工研院 2001.7~
2021.6
28.(A) Hand Operated Bicycle Gear Transmission Device 美國 US6467368B1 C-H. Feng
C-Y. Li
國科會 2002.10~
2020.9
29.(A) Bicycle Speed Control Apparatus 美國 US6564670B2 C-H. Feng
J-J. Wang
國科會 2003.3~
2023.3
30.(B) 雙撥桿式變速裝置 中華民國 213074 馮展華
歐柏毅
日馳企業股份有限公司 2003.9.21~
2014.2.7
31.(B) 機械式自行車碟式煞車 中華民國 214075 馮展華
廖書賢
丁弘光
蕭德瑛
國科會 2003.11.1~
2015.1.22
32.(A) Grip Gear-Shifter for Actuating Derailleur 美國 US6644143B2 C-H. Feng
J-J. Wang
I-C. Yan
T-S. Tseng
國科會 2003.11~
2012.11
33.(A) Mechanical Type Disc Brake for Bicycle 美國 US6736243B1 Z-H. Fong
S-H. Liao
D. Shaw
H-G. Ding
國科會 2004.3~
2020.2
34.(A) 螺旋式真空泵之螺旋轉子齒形 中華民國 公告號
200602560
馮展華
黃妃釧
陳嘉興
漢鐘精機股份有限公司 2004.7.14~
35.(A) 串、並聯式戟齒輪製造機 中華民國 I233847 馮展華
王培郁
丁弘光
宋震國
曾錦煥
國立中正大學 2005.06.11~
2024.4.1
36.(A) 螺旋轉子機構 中華民國 I240781 李後藤
馮展華
吳育仁
復盛 2005.10.1~
2024.8.25
37.(A) Parallel-Serial Bevel and Hypoid Gear Generating Machine 美國 US2006002775 Z-H. Fong
P-Y. Wang
H-G. Ding
C-K. Sung
C-H. Tseng
國科會 2006.1~
2025.12
38.(A) Machine of the Screw Rotor 美國 US2006078453 H-T. Lee
Z-H. Fong
Y-R. Wu
復盛 2006.4~
2026.3
39.(A) 面銑式戟齒輪與螺旋傘齒輪齒面縱向曲率修整方法 中華民國 I253363 馮展華
王培郁
國立中正大學 2006.4.21~
2023.12.8
40.(A) Spiral Rotator Machine 日本 JP2006214352 H-T. Lee
Z-H. Fong
復盛 2006.8~
2026.7
41.(A) Modified Radial Motion(MRM) Method for Modifying Lengthwise Curvature of Face-Milling Spiral Bevel and Hypoid Gears US US7104870B2 Z-H. Fong
P-Y. Wang
國科會 2006.9~
2026.8
42.(A) 齒輪加工裝置 中華民國 I267416 馮展華
曾錦煥
宋震國
劉嘉宏
國立中正大學
馮展華
2006.12.1~
2025.4.7
43.(B) 壓縮機排氣孔口之改良 中華民國 M304584 馮展華
吳育仁
顏立永
賴欣池
復盛 2007.1.11~
2016.8.1
其他

1. 「齒輪原理」行政院勞委會職業訓練局,航空工業零組件製造技術講習,81 年1 月。

2. 「齒輪加工實驗室規畫報告」工研院機械所,82 年1 月。

3. 「齒輪基本原理與設計」經濟部工業局,齒輪工業技術人才培訓班講義,82 年2 月16,17日,82 年3 月18,19 日,82 年4 月13,14 日。

4. 「傘齒輪之 CAD/CAM 技術」工研院機械所82 年度齒輪技術研討會,82 年3 月26 日。

5. 「齒輪原理與設計」交通部高速鐵路工程籌備處機電人員82 年度訓練計畫,82 年4 月21日。

6. 「自行車變速器 CAD/CAM 研發系統」工研院機械所82 年度自行車變速器設計技術研討會,82 年5 月4 日。

7. 「自行車變速器逆工程技術研究報告」工研院機械所 82 年度經濟部科技專案技術報告。

8. 「自行車變速器國內外專利及技術分析報告」工研院機械所82 年度經濟部科技專案技術報告。

9. 「自行車變速器、蝸桿蝸輪技術引進報告」工研院機械所82 年度經濟部科技專案技術報告。

10.「自行車變速器換檔穩定性與定位精度分析報告」工研院機械所83 年度經濟部科技專案技術報告。

11.「專業用自行車變速器機構參數及B、P 彈簧設計報告」工研院機械所84 年度經濟部科技專案技術報告。

12.「自行車變速器設計原理」工研院機械所84 年度齒輪技術研討會,84 年5 月11 日。

13.「蝸線傘齒輪的電腦輔助製造」機械月刊241 期,第360~374 頁,84 年8 月。

14.「自行車傳動系統關鍵零組件設計課程講義《傳統自行車變速器設計》」財團法人自行車工業研究發展中心,86 年3 月。

15.「關鍵零組件系統設計與開發《自行車變速撥桿設計與開發》」財團法人自行車工業研究發展中心,87 年8 月。

16.「乾式螺旋式壓縮機及真空泵浦簡介」機械月刊第290 期,1999 年9 月。

17.「機構與機器原理名詞」教育部國立編譯館編訂,華泰文化事業公司印行,審查委員之一,89 年5 月。

18.「自行車關鍵零組件之研究開發」知識創新,第十一期,90 年5 月。

19.「六軸電腦數值控制戟齒輪創成機器之數學模式研究」,工程科技通訊,第56 期,90 年6月。

20.「自行車碟式煞車系統之研發」,中華民國機構與機器原理學會會刊,91 年8 月。

21.「現代戟齒輪加工機器發展歷史與機台簡介」,機械月刊,第338 期,2003 年9 月。

22.「螺旋式壓縮機電腦輔助設計及系統整合」,機械工業雜誌,第287 期,2007 年2 月。

23.「圓柱齒輪成形切削數值模擬方法」,機械工業雜誌,第287 期,2007 年2 月。

24.「面滾式戟齒輪創成機器之數學模式研究Ⅱ」,工程科技通訊,第88 期,2007 年2 月。

25.「基於齒面相對修形的戟齒輪齒面設計技術」,機械月刊,第384 期,2007 年7 月。

26.「機械製造」書中之齒輪與凸輪製造章節撰寫,全華書局出版。

執行計畫 研究計畫:

計畫名稱

工作

起訖年月

委託機構

差速齒輪齒型研究計畫 主持人  93.11~94.10 介隆興齒輪股份有限公司
轉子線形設計與製造系統 主持人  94.5.1~96.4.30 復盛股份有限公司
產學合作:六軸電腦數控型戟齒輪創成機研發(3/3) 主持人  94.6.1~95.5.31 國科會 陸聯
多功能電動打氣機 主持人  94.7.1~95.6.30 福隆尖端科技
面滾式戟齒輪創成機器之數學模式研究(2/3)  主持人  94.8.1~95.10.31 國科會
中科投資計畫審查案「 紘毅自動化股份有限公 司」 主持人  94.10.24~94.11.30 中部科學工業園區開發
請求鑑定由鴻勁股份有 限公司所生產之「IC檢 測機」產品,型號為「W S-3000」,是否侵害發明專利第190373號「IC 測試處理機」? 主持人  94.5.30~94.6.30 鴻勁科技
請求鑑定由鴻勁股份有 限公司所生產之「IC檢 測機」產品,型號為「W S-3000」,是否侵害發明專利第190377號「應用於高頻IC測試之IC測 試處理機」? 主持人  94.5.30~94.6.30 鴻勁科技
產學合作計畫-電腦數 控型戟齒輪創成機研發 (3/3) 主持人 94.6.1~95.8.31  國科會,陸聯精密股份有限公司
裝有戟齒輪之重荷ATV用后齒輪箱 主持人 95.12.1~96.11.30 介隆興齒輪股份有限公司
紡車式捲線器操作性能檢測系統研發 主持人  95.5.1~95.11.30 寶熊漁具股份有限公司
紡車式捲線器繞線模擬研發 主持人  95.5.1~95.11.31 寶熊漁具股份有限公司
多功能電動打氣機 主持人  95.7~95.6 福隆尖端科技
面滾式戟齒輪創成機器之數學模式研究(3/3) 主持人  95.8.1~96.7.31 國科會
產學合作:六軸CNC齒輪振動噪音複合檢測機研發(1/2) 主持人   95.9.1~96.10.31 國科會
產學合作:六軸CNC齒輪振動噪音複合檢測機研發(1/2) 主持人  95.9.1~96.10.31 光陽工業股份有限公司
高精密滾齒加工機模擬軟體之研究 主持人  96.10.1~98.9.30 和大工業股份有限公司
動力刀塔傘齒輪開發計畫 主持人  96.12.1~97.11.30 僑星齒輪股份有限公司
螺旋轉子之諮詢與分析 主持人  96.8.1~97.7.31 復盛股份有限公司
蝸線傘齒輪和戟齒輪齒面拓樸線上量測及誤差修正技術之研究(1/3) 主持人  96.8.1~99.7.31 國科會
六軸CNC齒輪振動噪音複合檢測機研發(2/2) 主持人  96.9.1~97.8.31 光陽工業股份有限公司
六軸CNC齒輪振動噪音複合檢測機研發(2/2) 主持人  96.9.1~97.9.30 國科會
齒輪三次元量測儀之路徑規劃與驗證(1/3) 主持人  97.8.1~100.7.31 國科會
蝸線傘齒輪和戟齒輪齒面拓樸線上量測及誤差修正技術之研究(2/3) 主持人  97.8.1~99.7.31 國科會
第十二屆全國機構與機 器設計學術研討會  主持人  98.8.1~98.12.31 教育部