Education

Expertise

(1). Jo-Peng Tsai, Shan-Yang Wang, Hsin-Yu Cheng, Yung-Chou Kao, “Multi-Criteria Decision Making Method for Selection of Machine Tool”, 2010 3CA International Symposium on Computer Communication, Control and Automation, May 5-7, 2010, Tainan, Taiwan, v. 2, pp. 49-52 (EI)

(2). Yung-Chou Kao, Mau-Sheng Chen, “An Agent-Based Distributed Smart Machine Tool Service System”, 2010 3CA International Symposium on Computer Communication, Control and Automation, May 5-7, 2010, Tainan, Taiwan, v. 2, pp. 41-44 (EI)

(3). Yung-Chou Kao, Jo-Peng Tsai, Hsin-Yu Cheng, Chia-Chung Chao, “Design and Construction of a Virtual Reality Wire Cut Electrical Discharge Machining System”, 2010 3CA International Symposium on Computer Communication, Control and Automation, May 5-7, 2010, Tainan, Taiwan, v. 2, pp. 45-48 (EI)

(4). Yung-Chou Kao, Jo-Peng Tsai, Hsin-Yu Cheng, Chia-Chung Chao, “Development of a Virtual Reality Wire Electrical Discharge Machining System for Operation Training”, 2010 International Journal of Advanced Manufacturing Technology, Online Published, 2010/9/21, DOI 10.1007/s00170-010-2939-1, Springer (SCI)

(5). Yung-Chou Kao, Mau-Sheng Chen, “Research On an Agent-Based Distributed Multi-axis Reconfigurable Machining System”, April 2012, International e-Journal of Business & Technology Leadership (eJBTL), http://www.ejournalbusinesstechnologyleadership.net.au/papers/IeJBTL-1st%20Issue/Research%20on%20an%20Agent-Based%20Distributed%20Multi-axis%20Reconfigurable%20Machining%20System-Kao%20&%20Chen.pdf

(6). Hsin-Yu Cheng, Jo-Peng Tsai and Yung-Chou Kao, “The development of an APT program interpreter for 5-axis machining”, Advanced Materials Research Vols. 482-484 (2012) pp. 2247-2252, Online available since 2012/Feb/27 at www.scientific.net, © (2012) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMR.482-484.2247

(7). Hsin-Yu Cheng, Yung-Chou Kao, “Studies on the Exchangeability of Different APT Interpreters for 5-axis Machine Tool Applications”, Applied Mechanics and Materials Vols. 284-287 (2013) pp. 1924-1928, © (2013) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.284-287.1924

(8). Yung-Chou Kao, Mau-Sheng Chen, Tzu-Hao Chiu, “Development of a Web-based Virtual Five-Axis Milling Toolpath Simulation System”, Applied Mechanics and Materials Vols. 284-287 (2013) pp 1816-1820, © (2013) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.284-287.1816

(9). Chen-Lung Wei, Hsin-Yu Cheng, Chi-Yuang Yu, and Yung-Chou Kao, “Development of a Virtual Milling Machining Center Simulation System with Switchable Modular Components”, Applied Mechanics and Materials Vols. 479-480 (2014) pp 343-347, Online available since 2013/Dec/06 at www.scientific.net, © (2014) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.479-480.343 (AMM, EI indexed)

(10). Hsin-Yu Cheng and Yung-Chou Kao, “Five-Axis NC Program Conversion for Inclined Plane Machining”, Applied Mechanics and Materials Vols. 479-480 (2014) pp 333-337, Online available since 2013/Dec/06 at www.scientific.net, © (2014) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.479-480.333 (AMM, EI indexed)

(11) Y. C. Kao, N. T. Nguyen, M. S. Chen, S. C. Huang, “A combination method of the theory and experiment in determination of cutting force coefficients in ball-end mill processes”, Journal of Computational Design and Engineering, 2015

(12) N.T. Nguyen, M.S. Chen, S.C. Huang, and Y.C Kao, “An experimental method of the cutting force coefficient estimation of grey cast iron FC25”, Advanced Materials and Structural Engineering – Hu (Ed.), © 2016 Taylor & Francis Group, London, ISBN 978-1-138-02786-2

(13) Yung-Chou Kao, Da-Min Lin, Jian-Zhang Wu, Trung-Kien Vi, “An Integrated Smarter Cutting Parameter Selection System with Case Study for Pocket Milling”, International Journal of Automation and Smart Technology, doi: 10.5875/ausmt.v8i2.1681, Vol 8, No 2, 2018

(14) Li-Wei Chen, Jo-Peng Tsai, Yung-Chou Kao, Yu-Xian Wu, “Investigating the learning performances between sequence and context-based teaching designs for virtual reality (VR)-based machine tool operation training”, the Journal of Computer Applications in Engineering Education, John Wiley & Sons, DOI:10.1002/cae.22133, Article published in Issue on 4 September, 2019

(36) Kao, Y. C., Nguyen, N. T., Chen, M. S., and Su, S. T. (2014). Construction and application of a virtual CNC milling simulation system In Education and Training. Proceedings of the 2nd international Conference on Green Technology & Sustainable Development 2014 (GTSD14), PAPER ID-182, pp. 504-510, Nov. 30-31, 2014, Vietnam.

(37) 高永洲、鄭新有、陳茂盛、王逸凡、許栢融、張良晧、林文旺，「擬真CNC銑削暨車削工具機操作模擬與人機介面整合系統之研究」，第二屆台灣塑性加工研討會，2014年11月7日，虎尾科技大學，雲林，台灣

(38) 高永洲、鄭新有、魏競彥、許栢融、張良晧，「有縫不鏽鋼管縮管加工參數最佳化─以SUS441鋼管為例」，第二屆台灣塑性加工研討會，2014年11月7日，虎尾科技大學，雲林，台灣

(39) 高永洲、陳茂盛、王俊傑、許栢融、張良晧、王逸凡，「PLC編輯軟體人機介面設計規劃與可行性探討」，2014年11月14-15日，2014第二十二屆全國自動化科技研討會，虎尾科技大學，雲林，台灣

(40) 高永洲、鄭新有、陳茂盛、蘇信綜、許栢融、張良晧，「銑削加工模擬系統研發」，中國機械工程學會第31屆全國學術研討會暨103年度年會，6 – 7 Dec. 2014,逢甲大學，台中，台灣

(41) 高永洲、陳茂盛、王逸凡、許栢融、張良晧，「車削與銑削刀具和夾治具參數化於虛擬工具機系統整合之探討」，中國機械工程學會第31屆全國學術研討會暨103年度年會，6 – 7 Dec. 2014，逢甲大學，台中，台灣

(42) N. T. Nguyen, Y. C. Kao, S. C. Huang, and M. S. Chen “An experimental method of the cutting force coefficient estimation of grey cast iron FC25”, International Conference on Applied Mechanics, Materials, and Structural Engineering (ICAMMSE 2015), paper ID: CH#235, 25-26 January, 2015, Changzhou, China

(43)  Y. C. Kao, N. T. Nguyen, M. S. Chen, “Development of Virtual CNC milling system with the integration of cutting force simulation system and its applications in training”, Proceedings of the 38th International MATADOR Conference on Advanced Manufacturing, paper ID: 4072, 29 March 2015, Taiwan.

(44) Y. C. Kao, N. T. Nguyen, M. S. Chen, S. C. Huang, “A combination method of the theory and experiment in determination of cutting force coefficients in ball-end mill processes”, Proceedings of the 4th International Symposium of Computational Numerical Control Machining (CNCM 2015), 3-5 June, 2015, Hong Kong, China.

(45) Yung-Chou Kao, Ming-Chang Tsai, Mau-Sheng Chen, Po-Jung Hsu, and Zhi-Ren Liu, “Study on Virtual Milling Test and Calculation of Cutting Force Coefficients”, The 39th National Conference on Theoretical and Applied Mechanics, 20 – 21, November, 2015, National Taiwan University of Science and Technology, Taipei

(46) Yung-Chou Kao, “Perspectives for Machining Quality and Performance Enhancement from the Viewpoint of Integrated Traditional CAD/CAM and Industrial Machine Tool Application”, Workshop on Complex Surfaces Intelligent Manufacturing 2015, 6-8 December 2015, Changsha, Hunan, China

(47) Hsiang-Chun Tseng, Yung-Chou Kao, Meng-Shiun Tsai, Yi-Hung, Lu, Chi-Wei, Huang, “Networking with CNC Machine Tools Based on Open Platform Communications Unified Architecture”, 5th International Conference on Virtual Machining Process Technology – VMPT 2016, CIRP Sponsored Conference, 22 – 25 May, 2016, Taipei, Taiwan

(48) Yung-Chou Kao, Yu-Chuan Lin and Haw-Ching Yang, “Development of a Milling Machining Cutting Simulation Service in a Cloud-based System”, 12th Conference on Automation Science and Engineering, August 21-24, 2016, The Worthington Renaissance Hotel, Fort Worth, Texas, USA

(49) Gary C.-W. Shyi, Yung-Chou Kao, Jo-Peng Tsai, Li-Wei Chen, “Keyboard Design and Solution Efficiency in Using Machine Tools: An Eye-movement Investigation”, TAICHI 2016, ACM SIGCHI Taipei Chapter, 24 -25 August 2016, National Taiwan University, Taipei, Taiwan

(50) Gary C.-W. Shyi, Yung-Chou Kao, Jo-Peng Tsai, Li-Wei Chen, “The Pedagogical Effectiveness of Scaffolded Learning on Operating CNC Machine Tools in a Virtual Reality Environment”, TAICHI 2016, ACM SIGCHI Taipei Chapter, 24 -25 August 2016, National Taiwan University, Taipei, Taiwan

(51) 高永洲、李建毅、曾郁升，「挖槽路徑製作暨模擬與切削力估算」，論文編號12395，中國機械工程學會第34屆全國學術研討會，2017年12月1日~2日，國立勤益科技大學，台中市，台灣

(52) 高永洲、李崇碩、陳自豪、林彧甫、洪宗彬，「虛擬實境技術呈現CAE分析結果之案例探討」，論文編號11458，中國機械工程學會第34屆全國學術研討會，2017年12月1日~2日，國立勤益科技大學，台中市，台灣

(53) 魏銘恩、馮國華、高永洲，「車銑複合工具機工件夾持力量測之研究」，論文編號13909，中國機械工程學會第34屆全國學術研討會，2017年12月1日~2日，國立勤益科技大學，台中市，台灣

(54) 葉翼豪、馮國華、高永洲，「工具機主軸量測方法之研究」，論文編號13678，中國機械工程學會第34屆全國學術研討會，2017年12月1日~2日，國立勤益科技大學，台中市，台灣

(55) 高永洲、劉志仁、吳建璋，「走心式車銑複合機實體切削模擬暨切削參數最佳化系統開發之探討」，論文編號11167，中國機械工程學會第34屆全國學術研討會，2017年12月1日~2日，國立勤益科技大學，台中市，台灣

(56) 謝淳茵、高永洲、陳世樂、劉志仁、吳建璋，「銑削加工切削參數優化之系統化流程建構與案例探討」，2017年台灣輕金屬協會論文發表會，2017年10月20日，國立中正大學，嘉義縣，台灣

(57) Yung-Chou Kao, Chung-Shuo Lee, Zhi-Ren Liu, and Yu-Fu Lin, “Case Study of Virtual Reality in CNC Machine Tool Exhibition”, the 2^nd International Conference on Precision Machinery and Manufacturing Technology 2017 (ICPMMT 2017), Paper No. ICPMMT 06, 19 – 21 May 2017, Kenting, Pingtung, Taiwan

(58) Yung-Chou Kao, Sheng-Jhe Chen, “Development of a Quick 3D Machining Simulation System in Supporting Smart Manufacturing”, 13^th IEEE International Conference on Automation Science and Engineering, August 20 – 23, 2017, Xi’an, China

(59) Yung-Chou Kao, Yung-Ping Liu, Chen-Lung Wei, Shang-Heng Hsieh, Chi-Yuang Yu, “Application of a Cyber-Physical System and Machine-to-Machine Communication for Metal Machining Processes”, The IEEE I2MTC – International Instrumentation and Measurement technology Conference, May 14-17, 2018 – Royal Sonesta Hotel - Houston, Texas, USA

(60) Chung-Shuo Lee and Yung-Chou Kao, “Development of a Visual Presentation Platform for Machine Tool Exhibition and Maintenance”, The 15th International Conference on Automation Technology (Automation 2018, December 6-8, 2018, Taichung, Taiwan, Paper ID: 1080

(61) 吳建璋、高永洲、張柏翔，「走心櫛式車銑複合機切削參數優化建議系統開發暨案例探討”，中國機械工程學會第三十五屆全國學術研討會論文集，2018/11/30-12/1，國立中正大學，台灣，嘉義縣，論文編號0254

(62) Yung-Chou Kao, J-Y Lee, Y-S Zeng, “Development of a Light Weight Pocket Milling CADCAM System”, 中國機械工程學會第三十五屆全國學術研討會論文集，2018/11/30-12/1，國立中正大學，台灣，嘉義縣，論文編號0625

(63) 曾郁升、徐士哲、林孟秋、李建毅、高永洲，「銑床控制器線上CAD/CAM技術」，機械工業(Journal of Industrial Mechatronics)，432期，工具機與控制器技術專輯，PP. 78-86，2019年3月，ISSN 0255-0075

(64) Min-Hsiung Hung, Yu-Chuan Lin, Zih-Yan Shieh,Chao-Chun Chen, Yung-Chou Kao, Fan-Tien Cheng, “A Rapid Construction Scheme of Intelligent Manufacturing Devices based Edge Computing and Container Technology”, The proceedings of the 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE) (CASE 2019), University of British Columbia, Vancouver, BC, Canada, August 22-26, 2019

(65) Nhu-Tung Nguyen, Yung-Chou Kao, Tien Dung Hoang and Duc Trung Do, “A prediction Method of Dynamic Cutting Forces and Machine-Tool Vibrations when milling by using Ball-end mill cutter”, International Conference on Engineering and Research Application, ICERA 2019, Paper code: 43, December 1-2, 2019 in Thai Nguyen, Vietnam

(66) 李灃峻、高永洲、張訓誠，「人臉辨識暨即時訊息傳送於CNC工具機聯網系統應用之研究」，第二十二屆全國機構與機器設計學術研討會，中華民國一Ο八年十一月二十二、二十三日，論文編號060，(MOST 107-2218-E-194-001)

(67) Shyh-Leh Chen, Yung-Chou Kao, Anil Singh S, “2D-Lidar and Industrial Robot based 3D point cloud Environment for Obstacle detection”, 第二十二屆全國機構與機器設計學術研討會，中華民國一Ο八年十一月二十二、二十三日，論文編號071

(68) 宋承逸、高永洲、歐乃瑞、吳孟杰，「虛擬工廠暨虛擬實境可視化維修系統開發探討」，中國機械工程學會第三十六屆全國學術研討會論文集，2019/12/07-12/08，國立臺灣師範大學，台灣，台北市，論文編號0633，（MOST 106-EC-17-A-05-S3-038）

(69) 李崇碩、張訓誠、高永洲、佘振華，「虛擬實境工具機切削模擬-以小五軸銑床工具機為例」，中國機械工程學會第三十六屆全國學術研討會論文集，2019/12/07-12/08，國立臺灣師範大學，台灣，台北市，論文編號0634，（MOST 108-2218-E-194-006 -）

(70) 高永洲、李崇碩，「虛擬實境於工具機產業之應用與案例」，機械新刊，第37期自動化專輯，2019年12月，第66頁-79頁

(71) 李崇碩、高永洲、林彧甫、洪宗彬、陳自豪，「沉浸式虛擬實境於有限元素分析結果之可視化應用」，台灣鍛造協會108年度會員大會季論文發表會，2019年12月20日，台中金典酒店，台中市，台灣。

(72) Nguyen Nhu Tung, Hoang Tien Dung, Do Duc Trung, Yung-Chou Kao, Le Hong Ky, Tran Thi Hong, Nguyen Van Cuong, Vu Ngoc Pi, “Modelling Surface Roughness in Face-end Milling Process Using General Insert at Stable Cutting Conditions”, Accepted by The 10th International Conference on Advanced Materials Research, ICAMR 2020, January 17-20, 2020, Okinawa, Japan

(73) Yung-Chou Kao, Sheng-Jhe Chen, Feng-Jun Li, “Study of the Usage Life for a Robotic Arm Based on Reducer Diagnosis”, 2020 16^th IEEE International Conference on Automation Science and Engineering (CASE), August 20-21, 2020, Online Zoom Meeting

(74) Y-C Kao, S-J Chen, T-K Vi, G-H Feng, S-Y Tsai, “Study of milling machining roughness prediction based on cutting force”, IOP Conference Series: Materials Science and Engineering, Volume 1009, The 5th International Conference on Computing and Solutions in Manufacturing Engineering (CoSME'20) 7-10 October 2020, Brasov, Romania

(75) Chung-Shuo Lee, Sikandar Sultan Bhat, Zhi-Xiang Ou, Yung-Chou Kao, “Virtual Reality Training System of Risky Operations for a Punching Machine”, The 17th International Conference on Automation Technology, Automation 2020, Paper ID. 1055, 12 – 14, Nov. 2020, Fullon Hotel, Hualien, Taiwan

(76) Sheng-Jhe Chen, Yung-Chou Kao, “A Cloud Service for Automation based on SOA with Case Study on Robot Arm Useful Life Prediction”, The 17th International Conference on Automation Technology Automation 2020, Paper ID. 1067, 12 – 14, Nov. 2020, Fullon Hotel, Hualien, Taiwan (Best Paper Award)

(77) Chi-An Lai1, Shi-Jie Wang, Nai-Jui Ou, Chung-Shuo Lee, and Yung-Chou Kao, “On the Integration of a Walking Pad for Immersive Virtual Reality”, The 6^th International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2021), 21^st May ~ 23^rd May, 2021, Scheduled in the Howard Hotel, Kenting, Pingtung, Taiwan, (Changed to be Online Conference 12 – 13 June 2021 owing to COVID 19), Paper ID18

(78) Sin-Jia Chen, Jhen-Ting Huang, Tzu-Yu Shen, Feng-Jun Li, Yung-Chou Kao, “Applications of an Intelligent Manufacturing Integration System in Metal Cutting Processing with Case Studies”, The 6^th International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2021), 21^st May ~ 23^rd May, 2021, Scheduled in the Howard Hotel, Kenting, Pingtung, Taiwan, (Changed to be Online Conference 12 – 13 June 2021 owing to COVID 19), Paper ID23

(1). 高永洲、陳茂盛，「數控工具機與實習─含互動式3D虛擬銑削加工機模擬」，復文書局，2013年3月出版，復文書局，ISBN 978-986-03-6234-3

(2). 高永洲，「從工具機智能化功能到互動式3D虛擬工具機的資通訊(ICT)技術運用」，工具機與零組件雜誌Machine Tool & Accessory Magazine，2011年10月，No. 35, pp. 55-58

(3). 高永洲，「CNC工具機服務化之遠端資訊管理與服務系統概述」，工具機與零組件雜誌Machine Tool & Accessory Magazine，2012年9月，No. 44, pp. 61-64

(4). 高永洲，「金屬切削加工遠距製造輔助功能開發與應用分析」，精密機械研究發展中心智慧型機器人產業發展推動計畫分包計畫， 2013年12月

(5). 高永洲，「工具機切削加工加值服務技術應用論壇─後語」，工具機與零組件雜誌Machine Tool & Accessory Magazine，2013年10月