faculty

師資介紹

姚宏宗
  • 姓名

    姚宏宗

  • 職稱

    (特聘教授)專任教授

  • 學歷

    俄亥俄州立大學 / 美國 / 機械工程 / 博士

  • 專長

    三次元量測、電腦輔助設計、精密加工製造、電腦繪圖

  • 研究室

    工B 422室 R422

  • 聯絡電話

    TEL:(05)272-0411 ext.33302
    FAX:(05)272-0589

  • Email

    imehty@ccu.edu.tw

  • 網頁

    個人網頁連結

1.Yau, H. T. and Menq, C. H., "Concurrent Process Planning for Machining and Inspection of Sculptured Surfaces", Transactions of North American Manufacturing Research Institution/SME, Vol. 19,1991.

2.Menq, C. H., Yau, H. T., and Lai, G. Y., "Automated Precision Measurement of Surface Profile in CAD Directed Inspection", IEEE Transactions on Robotics and Automation, Vol. 8, No. 2, 1992.(SCI)

3.Yau, H. T. and Menq, C. H., "An Automated Dimensional Inspection Environment for Manufactured Parts Using Coordinate Measuring Machines", International Journal of Production Research, Vol. 30, No. 7, 1992.(SCI)

4.Menq, C. H., Yau, H. T., and Wong, C. L., "An Intelligent Planning Environment for Automated Dimensional Inspection Using Coordinate Measuring Machines", Transactions of the ASME, Journal of Engineering for Industry, Vol. 114, May 1992.(SCI)

5.Yau, H. T. and Menq, C. H., "Concurrent Process Planning for Finish Milling and Dimensional Inspection of Sculptured Surfaces in Die and Mold Manufacturing", International Journal of Production Research, Vol. 31, No. 11, 1993.(SCI)

6.Yau, H. T. and Menq, C. H., "Automated Path Planning for Dimensional Inspection of Dies and Molds Having Complex Surfaces.", International Journal of Machine Tools and Manufacture, Vol. 35, No. 6, 1995.(SCI)

7.Yau, H. T., "A Unified Least Squares Approach to the Evaluation of Geometric Errors Using Discrete Measurement Data", International Journal of Machine Tools and Manufacture, Vol. 36, No. 11, pp. 1269-1290, 1996. (NSC 85-2212-E-194-005)(SCI)

8.Yau, H.T., "Reverse Engineering of Engine Intake Ports by Digitization and Surface Approximation", International Journal of Machine Tools and Manufacture, Vol. 37, No. 6, pp. 855-871, 1997. (NSC 85-2212-E-194-005)(SCI)

9.Yau, H.T., "Evaluation and Uncertainty Analysis of Vectorial Tolerances", Precision Engineering, Vol. 20, No. 2, pp. 123-137, 1997. (NSC 86-2212-E-194-003) (SCI)

10.Yau, H.T., "Generalization and Evaluation of Vectorial Tolerances", International Journal of Production Research, Vol. 35, No. 6, pp. 1763-1783, 1997. (NSC 86-2212-E-194-003)(SCI)

11.Yau, H.T. and Chen, J.S., “Reverse Engineering of Complex Geometry Using Rational B-Splines”, The International Journal of Advanced Manufacturing Technology, Vol. 13, No. 10, pp. 548-555, 1997. (NSC 86-2212-E-194-005)(EI)

12.Yau, H.T., “Uncertainty Analysis in Geometric Best Fit”, International Journal of Machine Tools and Manufacture, Vol. 38, No.10, pp. 1323-1342, 1998. (NSC 86-2212-E-194-003)(SCI)

13.Yau, H.T., “A Model-Based Approach to Form Tolerance Evaluation Using Non-Uniform Rational B-Splines”, Robotics and Computer Integrated Manufacturing, Vol. 15, pp. 283-295, 1999. (NSC 87-2212-E-094-015)(SCI)

14.Yau, H.T., Chen, C.Y., and R.G.Wilhelm, “Registration and integration of multiple laser scanned data for reverse engineering of complex 3D models”, International Journal of Production Research, Vol.38, No.2, pp. 269-285, 2000. (NSC 87-2622-E-194-001)(SCI)

15.Yau, H.T., and Kuo, M.J., “NURBS Machining and Feed Rate Adjustment for High-Speed Cutting of Complex Sculptured Surface”, International Journal of Production Research, Vol.39, No.1, pp.21-41, 2001. (SCI)

16Yau, H.T., Chuang, C.M., and Chen, C.Y., “A Reverse Engineering Approach to Generating Interference-Free Tool-Paths in Three-Axis Machining from Scanned Data of Physical Models”, International Journal of Advanced Manufacturing Technology, Vol.19, pp.23-31, 2002. (SCI)

17.Yau, H.T., Kuo, C.C., and Yeh, C.H., “Extension of surface reconstruction algorithm to the global stitching and repairing of STL models”, Computer-Aided Design,Vol.35,pp.477-486 , 2003. (SCI)

18.Kuo, C.C. and Yau, H.T., “Reconstruction of Virtual Parts from Unorganized Scanned Data for Automated Dimensional Inspection”, ASME/ACM Transaction, Journal of Computing and Information Science in Engineering (JCISE), Vol.3, March, 2003.(SCI)

19.Yau, H.T, Ting, J.Y., and Chuang, C.M., “NC Simulation with Dynamic Errors Due to High-Speed Motion”, International Journal of Advanced Manufacturing Technology, accepted, Feb, 2003.(SCI)

20.Liao, S.J., Chang, D.Y., Chen, H.J., Tsou, L.S., Ho, J.R., Yau, H.Y., Hsieh W.H., and Wang, James T., Su, Y.C., “optimal Process Conditions of Shrinkage and Warpage of Thin-Wall Parts”, Polymer Engineering and Science,Vol.44, Issue 5, pp.917-928, 2004. (SCI)

21.Yau, H.T., Chuan, J.M, and Lee, Y.S., “NC Machining of Triangulated Sculptured Surfaces in STL Format with a Generalized Cutter”, International Journal of Product Research (EI, SCI), International Journal of Production Research, Vol.42, No.13, pp.2573-2598, 2004.

22.Ren, Y., Yau, H.T., and Lee, Y.S., "Clean-up Tool Path Generation by Contraction Tool Method for Machining Complex Polyhedral Models", Computers in Industry, Vol.54, pp.17-33, 2004. (SCI)

23.Kuo, C.C. and Yau, H.T., "A Delaney-Based Region-Growing Approach to Surface Reconstruction from Unorganized Points", Computer-Aided Design, Vol.37, pp.825-835, 2005. (SCI)

24.Chuang, C.M. and Yau, H.T., "A New Approach to Z-Level Contour Machining of triangulated surface models Using Fillet Endmills", Computer-Aided Design,Vol.37, pp.1039-1051, 2005. (SCI)

25.Yau, H.T., Tsou, L.S., and Tong, Y.C., "Adaptive NC Simulation for Multi-axis Solid Machining", Computer-Aided Design and Applications, Vol.2, No.1, 2005.

26.Yau, H.T., Lee, R.K., Chuang, C.M., and Hsu, C.Y., "NC Tool-path Generation Based on Surfel Models Constructed from Random Scanned Data", Computer-Aided Design and Applications, Vol.2, No.4, 2005.

27.M.S. Tsai, M.H. Lin, and H.T. Yau, "Development of Command-Based Iterative Learning Control Algorithm with Consideration of Friction, Disturbance, and Noise Effects", IEEE Transactions on Control Systems Technology, Vol.14, No.3, 2006.(SCI)

28.Kuo, C.C. and Yau, H.T., "A New Combinational Approach to Surface Reconstruction with Sharp Features", IEEE Transaction on Visualization and Computer Graphics, Vol.12, Issue 1, pp. 73-82, 2006. (SCI)

29.Yau, H.T., Lin, M.T., and Tsai, M.S., "Real-time NURBS interpolation using FPGA for high speed motion control", Computer Aided Design, Vol.38, No.10, 2006. (SCI)

30.Yau, H.T., Lin, M.H., Tsai, H.S., "Design and Implementation of Real-time NURBS Interpolation using an FPGA-based Motion Controller", Computer Aided Design, Vol. 38, No. 10, pp.1123-P.1133. (SCI)

31.Yau, H.-T. and Hsu, C.-Y., ”Development of a Dental Training System Based on Point-based Models”, Computer-Aided Design and Applications, Vol.3, No.6, pp.779-788, 2006.

32.Yau, H. T., Tsou, L. S. and Tsai, M. J., ”Octree-based Virtual Dental Training System with a Haptic Device”, Computer-Aided Design and Applications, Vol.3, No.1-4, pp.415-424, 2006.

33.Yau, H.T., and Wang, J.B., "Fast Bezier interpolator with real-time lookahead function for high-accuracy machining", International Journal of Machine Tools and Manufacture, Vol.47, No.10, 2007. (SCI)

34.Yau, H.T., Wang, J.B., Hsu, C.Y., and Yeh, C.H., "PC-based controller with real-time look-ahead NURBS interpolator", Computer-Aided Design and Applications, Vol.4, No.1-6, pp.331-340, 2007. (EI)

35.Yau, H. T., Tsou L. S. and Tseng,H. M., “Automatic Registration Using Virtual Polar Ball”, Computer-Aided Design and Applications, Vol.4, No.1-4, pp.427-436, 2007. (EI)

36.Lin, M.T., Tsai, M.S., and Yau, H.T., "Development of a dynamics-based NURBS interpolator with real-time look-ahead algorithm", International Journal of Machine Tools and Manufacture, Vol.47, No.15, pp.2246-2262, DEC 2007. (SCI)

37.Tsai, M.-S., Nien, H.-W. and Yau, H.T., “Development of an integrated look-ahead dynamics-based NURBS interpolator for high precision machinery,” Computer-Aided Design, Vol. 40, no. 5, pp. 554-566, 2008. (SCI).

38.Yau, H.T., Hsu, C.-Y., Peng, H.-L. and Pai, C. C., “Computer-aided Framework Design for Digital Dentistry”, Computer-Aided Design and Applications, Vol.5, No.5, pp.667-675, 2008. (EI)

39.Yau, H.T., Lin, Y. K., Tsou L. S. and Lee, C. Y.,”An Adaptive Region Growing Method to Segment Inferior Alveolar Nerve Canal from 3D Medical Images” Computer-Aided Design and Applications, Vol.5, No.5, pp.743-752, 2008. (EI)

40.Yau, H.T., and Tsou, L.S., “Efficient NC Simulation for Multi-Axis Solid Machining With a Universal APT Cutter”, Journal of Computing and Information science in Engineering, Vol.9, Issue 2 Article Number: 021001, JUN 2009

41.Wang, J.B., and Yau, H.T.,” Real-time NURBS interpolator: application to short linear segments”, International Journal of Advanced Manufacturing Technology, Vol. 41, Issue 11-12, PP.1169-1185, APR 2009

42.Yau, H.T and Hsu, C.Y., ”Generating NC tool paths from random scanned data using point-based models”, The International Journal of Advanced Manufacturing Technology, Vol.41, Issue 11-12, PP.897-907, APR 2009. (SCI)

43.Yau, H.Y., Goto, M., Yang, T. J., Chen, K.Y. Hsu, C.Y., and Shimizu, A.,” Virtual plaster model reconstruction for dental application”, Computer-Aided Design and Applications, v 6, n 6, p 769-779, 2009

44.Tsai, M.-S., Nien, H.-W. and Yau, H.T., “Development of a real-time look-ahead interpolation methodology with spline-fitting technique for high-speed machining”, The International Journal of Advanced Manufacturing Technology, Vol.47, Issue 5-8, pp. 621-638, MAR 2010.(SCI)

45.姚宏宗, “電腦輔助三次元量測”, 機械月刊第247期, 一九九六年二月號, pp.1733-184(金筆獎-全年度最佳文章).

46.姚宏宗、邱顯智、陳信全, “逆向工程-點資料前置處理與曲面重建”, 機械月刊第262期, 一九九七年五月號, pp. 228-237(優等獎-全年度次佳文章).

47.姚宏宗、呂建豪, “虛擬三次元量測系統發展”, 中國航空太空學會會刊, 29卷, 第2期, pp. 1-7.

1.Yau, H. T. and Menq, C. H., "The Development of An Intelligent Dimensional Inspection Environment in Manufacturing", Proc. of U.S.A.-JAPAN Symposium on Flexible Automation, Koyto, Japan, 1990.

2.Yau, H. T., Lai, G. Y., Menq, C. H., and Miller, R. A., "Statistical Evaluation of Form Tolerances Using Discrete Measurement Data", Proc. of the Symposium on Advances in Integrated Product Design and Manufacturing, ASME Winter Annual Meeting, Dallas, TX, 1990.

3.Menq, C. H. and Yau, H. T., "An Intelligent, Computer-integrated and Self-sustaining Environment for Automated Dimensional Inspection of Manufactured Parts", Proc. of 1991 Design and Manufacturing Systems Conference, Austin, TX, January, 1991.

4.Yau, H. T. and Menq, C. H., "Path Planning for Automated Dimensional Inspection Using Coordinate Measuring Machines", Proc. of IEEE Robotics and Control Conference, Vol. 3, 1991.

5.Yau, H. T. and Menq, C. H., "Computer-Aided Coordinate Metrology", Proc. of the 13th Annual ASME International Computers in Engineering Conference and Exposition, San Diego, CA, August 1993.

6.Yau, H. T., Haque, S., and Menq, C. H., "Reverse Engineering in the Design of Engine Intake and Exhaust Ports", Proc. of the Symposium on Computer-Controlled Machines for Manufacturing, 1993 ASME Winter Annual Meeting, New Orleans, LA, Dec. 1993.

7.Yau, H. T., "Uncertainty Analysis of Circle and Arc Measurement Using Discrete Sample Pints", Proc. of the 1993 ASPE Annual Meeting, Seattle, Washington, Nov. 1993.

8.Yau, H. T., "Generalization and Evaluation of Vectorial Tolerances", Proc. of the ASPE 10th Annual Meeting, Austin, Texas, October, 1995.

9.Yau, H. T. and Chen J. S., "CMM Digitization and Geometric Modeling of Engine Intake Ports", Proc. of the International Conference on Precision Engineering '95, Singapore, Nov. 1995.

10.Yau, H. T. and Chen, K.W., "General Form Tolerance Evaluation Using Non-Uniform Rational B-Splines", Proc. of the 1996 ASME Design Automation Conference, Irvine, California, August, 1996.

11.Yau, H.T., "Geometric Modeling of Engine Intake Ports by Digitization and Reverse Engineering", 1996 Japan-USA Symposium on Flexible Automation, Boston, MA., July, 1996.

12.Yau, H.T. and Chen J.S., "Surface Approximation and Automatic Generation of Complex Geometric Model from Laser Scan Data", 1996 ASPE Annual Meeting, Monterey, CA, November, 1996.

13.Yau, H.T., "Best Fit Transformation and Uncertainty Analysis in Computational Metrology", 1996 ASPE Annual Meeting, Monterey, CA, November, 1996.

14.Yau, H.T., “Extension of Vectorial Tolerances for Coordinate Measurement Analysis”, ASME ASIA’97, Singapore, September, 1997.

15.Yau, H.T., Chen,K.W.,“Registration and Integration of Multiple Laser Scanned Data”, Asia-Pacific Symposium on Instrumentation(APSI’97) , Huangshan, China, August, 1997.

16.Yau, H.T.,“Best Fit Uncertainty Analysis for Computing Geometric Tolerances”, ASME Design Engineering Technical Conferences, Sacramento, CA, September,1997.

17.Yau, H.T., Chiou, H.C., and Chen, H.C., “Generation of Complex Geometric Models from Laser Scanned Data Using Surface Approximation and Reverse Engineering Techniques”, 1998 Pacific Conference on Manufacturing, Brisbane, Australia, August, 1998.

18.Yau, H. T., “NURBS Machining and Feed Rate Adjustment for High Speed Cutting of Complex Sculptured Surfaces”, 1999 Sino-German Joint Symposium on High-speed and High Precision Machining, Taiwan, R.O.C., March 1999.

19.Yau, H. T., and Lu, C. H., “The Development of Virtual CMM for Flexible CMM Measurement using 3-D Scanned Data”, Automation 2000 Taipei International Convention Center, Taiwan, R.O.C., May 2000.

20.Yau, H. T., and Chen, C. Y., “A Reverse-Engineering Approach to Quick Design of Die and Mold Considering Non-Uniform Shrinking Factors”, Automation 2000 Taipei International Convention Center, Taiwan, R.O.C., May 2000.

21.Yau, H. T., and Chuang, C. M., “Tool-Path Generation in Three-Axis Machining from Scanned Data of Physical Models by Using Filleted Endmills”, 2000 ASME International Design Engineering Technical Conferences, Baltimore, Maryland, September 2000.

22.Yau, H.T., and Kuo, C.C., ”Reconstruction and Machining of Triangulated Sculptured Surfaces from Unorganized Scanned Data” the 9th SIAM conference on geometric design and computing, Sacramento, CA, Oct. 5-9, 2001.

23.Ren, Yongfu , Lee, Y.S., and Yau, H.T., “Clear-Cut Region Extraction and Pencil-Cut Path Generation for High Performance Machining”, Proceedings of the 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, p.p.13, August 11-14, National Chung Cheng University, Chia-Yi, Taiwan.

24.Yau, H.T., and Lin, R.S., ”The Implementation on High-Speed Cutting and Five-Axis Machining”, Proceedings of the 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, p.p.17, August 11-14, National Chung Cheng University, Chia-Yi, Taiwan.

25.Yau, H.T., and Kuo, C.C., “Computer-Aided Coordinate Metrology for Rapid Inspection of Injection Molding Parts” , Proceedings of the 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, p.p.93, August 11-14, National Chung Cheng University, Chia-Yi, Taiwan.

26.Chen, S.C., and Yau, H.T., “Missions and Progress on Mold/Molding Technology Promotion Education Program of Mold Automation Education Resource Center“, Proceedings of the 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, p.p.92, August 11-14, National Chung Cheng University, Chia-Yi, Taiwan.

27.Yau, H.T., Kuo, C.C., and Lee, Y.S., “Virtual CMM and Virtual Part for Intelligent Dimensional Inspection”, 2002 Japan-USA Symposium on Flexible Automation, International Conference on New Technological Innovation for the 21st Century July 14-19, 2002 Hiroshima, Japan.

28.Yau, H.T., Kuo, C.C., and Yeh, C.C., “A Global Method for Automatic Stitching and Repairing of STL Models for Rapid Prototyping and Solid Machining“, Proceedings of 2002 NRC-NSC Canada-Taiwan Joint Workshop on Advanced Manufacturing Technologies, p.p.97-106, 23-24 September 2002, London, Canada.

29.M. S. Tsai, M. T. Lin, H. T. Yau, and Y. Z. Jian, “Development of Command-Based Iterative Learning Control Algorithm for Compensation of Friction and Tracking Error,” in The 7th International Conference on Automation Technology (Automation 2003), Chia-Yi, Taiwan, R.O.C., Sep.11-14, 2003.

30.Chuan-Chu Kuo and Hong-Tzong Yau, “A Delaunay-Based Region-Growing
Approach to Surface Reconstruction from Unorganized Points”, Computer-Aided Design and APPLICATIONS, Volume 1Numbers 1-4 Conference Volume, p.p.73-82, 24-28 May, 2004, Pattaya, Thailand.

31.H.T. Yau, C.C. kuo, H.L. Peng, H.C. Cheng, and W.T. Wang, “Intelligent and Innovative Technologies for Digital Modeling and Production of Athletic Shoe Molds”, Automation 2005, the Eighth International Conference on Automation Technology, Taichung, Taiwan, May 5-6, 2005.

32.M. S. Tsai, M. T. Lin and H. T. Yau, “Command-Based Iterative Learning Control for Compensation of Servo Lag and Friction Effects,” Proceedings of the 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Monterey, California, USA, Jul. 24-28, 2005.

33.H. T. Yau, M. T. Lin, Y. T. Chan, and K. C. Yuan, “Design and Implementation of Real-time NURBS Interpolator using a FPGA-Based Motion Controller,” Proceedings of the 2005 IEEE/ASME International Conference on Mechatronics, Taipei, Taiwan, Jul. 10-12 , 2005.

34.Yau, H.T., Tsou, L.S., and Tong, Y.C., "Adaptive NC Simulation for Multi-axis Solid Machining", Computer-Aided Design and Applications, Vol.2, No.1, 2005, Bangkok.

35.Yau, H.T., Lee, R.K., Chuang, C.M., and Hsu, C.Y., "NC Tool-path Generation Based on Surfel Models Constructed from Random Scanned Data", Computer-Aided Design and Applications, Vol.2, No.4, 2005, Bangkok.

36.Yau, H.T., Wang, J.B., Hsu, C.Y., and Yeh, C.H., "PC-based controller with real-time look-ahead NURBS interpolator", Computer-Aided Design and Applications, Vol.4, No.1-6, 2007, Hawaii.

37.M.-S. Tasi, H.-W. Nien and H.-T. Yau, “An integrated look-ahead dynamic interpolator for NURBS curve,” Proceedings of the 46th IEEE Conference on Decision and Control, pp. 1868-1873, New Orleans, LA, USA, Dec. 12-14, 2007. (EI)

38.Lin, M.T., Tsai, M.S., Yau, H.T, “Development of real-time look-ahead algorithm for NURBS interpolator with consideration of servo dynamics”, , Proceedings of the 46th IEEE Conference on Decision and Control 2007, p 1862-1867, CDC 2007 (EI)

39.H. T. Yau, Y. K. Lin, H. C. Chen, L. S. Tsou and C. Y. Lee, “Using a GPU to Accelerate the CL Surface Generation”, Proc. of the 24st (ROC) National Conference on Mechanical Engineering (CSME), 2007.

40.M.-T. Lin, H.-T. Yau, H.-W. Nien and M.-S. Tsai, “FPGA-based motion controller with real-time look-ahead function,” Proceedings of the 2008 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 1406-1411, Xi’an, China, July 2-5, 2008. (EI)

41.H.-W. Nien, H.-T. Yau, H.-C. Su, M.-S. Tsai and C.-C. Sum, “On acceleration/deceleration hybrid interpolation for multi-blocks of NURBS curves,” Proceedings of the 2008 IEEE/ASME International Conferenece on Advanced Intelligent Mechatronics, pp. 910-915, Xi’an, China, July 2-5, 2008. (EI)

42.H. T. Yau, C. T. Ye, L. S. Tsou and Y. K. Lin, “Accelerating Model Modification by Using GPU in NURBS-base CAD System”, Proc. of the 25st (ROC) National Conference on Mechanical Engineering (CSME), 2008.

43.H. T. Yau, H. Y. Shih, L. S. Tsou and Y. K. Lin, “Automatic Classifying Medical Image for 3D Oral Implant Planning based on Volume Rendering”, Proc. of the 25st (ROC) National Conference on Mechanical Engineering (CSME), 2008.

44.H. T. Yau, K. H. Tien, L. S. Tsou and Y.K Lin, “Oral Implant Surgery Simulation with Force Feedback System” Proc. of the 25st (ROC) National Conference on Mechanical Engineering (CSME), 2008.

45.姚宏宗﹑李啟銘,〈單一化的最小平方計算幾何誤差〉,中國機械工程學會第十二屆全國學術研討會,八十四年十一月。

46.姚宏宗﹑李啟銘﹑陳奎伍,〈公差計算中最佳嵌合之不準度分析〉,中國機械工程學會第十三屆全國學術研討會,八十五年十一月。

47.姚宏宗﹑邱顯智﹑陳信全,〈逆向工程-點資料前置處理與曲面重建〉,中國機械工程學會第十三屆全國學術研討會,八十五年十一月。

48.姚宏宗、彭輝郎,(由NC程式重建複雜曲面之逆向工程系統),中國機械工程學會第十五屆全國學術研討會,八十七年十一月。

49.姚宏宗、蔡永霖,(NC加工程式效率最佳化),中國機械工程學會第十五屆全國學術研討會,八十七年十一月。

50.姚宏宗、陳俊諺,(應用逆向工程於快速模具設計),第一屆海峽兩岸製造技術研討會,八十九年一月。

1.Yau, H. T. and Menq, C. H., "The Development of An Intelligent Dimensional Inspection Environment in Manufacturing", NSF/ERC for Net Shape Manufacturing, The Ohio State University, 1990.

2.Yau, H. T. and Menq, C. H., "Automated Precision Measurement of Surface Profile in CAD Directed Inspection", NSF/ERC for Net Shape Manufacturing, The Ohio State University, 1990.

3.Yau, H. T., Lai, G. Y., Menq, C. H., and Miller, R. A., "Statistical Evaluation of Form Tolerances Using Discrete Measurement Data", NSF/ERC for Net Shape Manufacturing, The Ohio State University, 1990.

4.Yau, H. T., "A Unified Least Squares Approach to the Evaluation of Geometric Errors - Evaluation of Conicity and Cylindricity for High Pressure Injector Components in Diesel Engines", Cummins Internal Report, 1991.

5.Yang, Z., Yau, H. T., and Menq, C. H., "Geometric Tolerance Evaluation and Uncertainty Analysis for Dimensional Inspection Using Discrete Measurement Data", NSF/ERC for Net Shape Manufacturing, The Ohio State University, 1992.

6.Yau, H. T., "A Study on the Elliptical Skirt Diameter Measurement of Diesel Engine Pistons", Cummins Internal Report, 1992.

7.Yau, H. T., "Reverse Engineering for the Design of Engine Intake and Exhaust Ports", Cummins Internal Report, 1992.

8.Yau, H.T., "Digitization and Reverse Engineering of Encore Intake Ports for Computational Fluid Analysis", Cummins Internal Report, 1994.

9.姚宏宗,“電腦輔助三次元量測”, 機械月刊第247期, 一九九六年二月號, pp. 173-184 (金筆獎).

10.姚宏宗、邱顯智、陳信全, “逆向工程-點資料前置處理與曲面重建”, 機械月刊第262期, 一九九七年五月號, pp. 228-237(優等獎)

研究計畫:

 

計畫名稱
工作
起訖年月
委託機構
教學卓越:「微/奈米模具與成型技術」研討會 主持人 94.1.1~94.12.31 教育部顧問室
小產學:水晶雷射內雕3D點資料重建系統程式開發 主持人  94.11.1~95.10.31 國科會 晶奇實業有限公司
微深孔加工模式分析模擬研究 主持人  94.3.1~94.11.30 工研院
電腦輔助三次元檢測分析系統 主持人  94.5.1~96.4.30 復盛股份有限公司
94年度「精密機電整合人才培育先導型計畫」:模具自動化-1 主持人  94.1.1~94.12.31 教育部
以點群資料為基礎之次世代電腦輔助設計與製造軟體系統研發(I) 主持人  94.8.1~95.7.31 國科會
微/奈米模具成型與印刷技術研討會-報名費 主持人  94.9.1~95.2.28 094-01063
車銑複合切削路徑規劃技術研究 主持人  95.10.1~97.9.30 寶元科技股份有限公司
全瓷數位假牙之設計分析與製造系統-子計畫一:以力回饋機構開發牙齒修形及教育訓練模擬系統(1/2)  主持人  95.8.1~97.7.31 國科會 整合型
全瓷數位假牙之設計分析與製造系統-總計畫(1/2) 主持人  95.8.1~97.7.31 國科會 整合型
手部姿態辨識分析研究 主持人  95.9.1~96.8.30 紡研所
全瓷數位假牙之設計分析與製造系統-子計畫一:以力回饋機構開發牙齒修形及教育訓練模擬系統(2/2) 主持人  96.8.1~97.7.31 國科會 整合型
全瓷數位假牙之設計分析與製造系統-總計畫(2/2) 主持人  96.8.1~97.7.31 國科會 整合型
以點群資料為基礎之次世代電腦輔助設計與製造軟體系統研發(1/2) 主持人 96.8.1~98.7.31 國科會
以點群資料為基礎之次世代電腦輔助設計與製造軟體系統研發(2/2) 主持人  97.8.1~98.7.31 國科會
結合力回饋裝置之牙齒舌側矯正排牙規劃(1/2) 主持人   97.8.1~99.7.31 國科會
以力回饋機構開發真實力模擬之人工植牙教育訓練模擬系統 主持人  98.8~101.7 國科會