研討會論文

1. C. S. Liu*, and Y. A. Li, “The sensing technology of applying the acoustic emission sensor to the grinding wheel loading phenomenon,” Proceedings of 14th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications (MESA2018), Accepted. (Oulu, Finland, July 02-04, 2018)
2. C. C. Hu, C. L. Hsieh, Y. H. Chang, and C. S. Liu*, “Design of VCM actuator with optical zoom for smartphone cameras,” Proceedings of the IEEE International Magnetics Conference 2018 (INTERMAG 2018), pp. CT-12. (Marina Bay Sands Convention Center, Singapore, April 23-27, 2018)
3. C. S. Liu*, J. C. Huang, and Y. C. Huang, “Calibration of multi-focal planes for zoom-lens unit,” Proceedings of 2017 Eleventh International Conference on Sensing Technology (ICST2017), pp. S2C-05. (Sydney, Australia, December 02-04, 2017)
4. 羅詠泰, 陳昱達, 蒲昱帆, 劉建聖*, “可線性軸六自由度幾何誤差量測系統,” 2017全國製造工程研討會論文集, pp. SME02, 2017. (崑山科技大學, 台南市, Taiwan, November 17-18, 2017)
5. 李祐安, 劉建聖*, “應用聲射感測器於砂輪填塞現象之感測技術,” 2017全國製造工程研討會論文集, pp. SME04, 2017. (崑山科技大學, 台南市, Taiwan, November 17-18, 2017)
6. 蒲昱帆, 陳昱達, 羅詠泰, 劉建聖*, “可同時量測六自由度幾何誤差的長行程線軌量測系統,” 2017全國製造工程研討會論文集, pp. SME07, 2017. (崑山科技大學, 台南市, Taiwan, November 17-18, 2017)
7. 陳昱達, Pruthvikumar s more, 劉建聖*, “五軸工具機雙旋轉軸組裝誤差線上量測技術分析,” 2017全國製造工程研討會論文集, pp. SME13, 2017. (崑山科技大學, 台南市, Taiwan, November 17-18, 2017)
8. C. S. Liu*, Z. Y. Wang, and Y. T. Chen, “Optical sensor for simultaneous refractive index and thickness measurement,” Proceedings of the International Symposium on Optomechatronic Technology 2017 (ISOT2017), pp. AQ-05. (Tainan, Taiwan, November 05-09, 2017)
9. C. L. Hsieh, H. Y. Wang, Y. H. Chang, and C. S. Liu*, “Analysis and validations of optical image stabilization actuator for cellphone camera modules,” Proceedings of the 24rd International Congress on Sound and Vibration (ICSV24), pp. T17#68. (London, UK, July 23-27, 2017)
10. C. L. Hsieh, Y. H. Chang, Y. T. Chen, and C. S. Liu*, “Design of VCM actuator with the L-shape coil for smartphone cameras,” Proceedings of the IEEE International Magnetics Conference 2017 (INTERMAG 2017), pp. HT-06. (Dublin, Ireland, April 24-28, 2017)
11. G. J. Vathakkattil, Y. H. Chang, G. Hao*, V. Pakrashi*, and C. S. Liu*, “Development of a distributed-compliance auto-focusing voice-coil actuator,” Proceedings of the Asian Conference on Engineering and Natural Sciences 2017 (ACENS2017), pp. 67442, 2017. (Sapporo Convention Center, Hokkaido, Japan, January 19-21, 2017)
12. C. S. Liu*, C. M. Jan, and J. Y. Yang, “The development and optimization of an optical autofocusing system by adopting the dual-confocal configuration,” Proceedings of the 6th International Conference on Advanced Manufacturing (ICAM2016), pp. F8543, 2016. (Sun Moon Lake, Taiwan, December 16-19, 2016)
13. 劉建聖*,王澤彥,宋睿耆,“應用於透明邊界層之雷射自動對焦顯微鏡之設計,”中國機械工程學會第三十三屆全國學術研討會論文集, pp. 1225, 2016. (國立臺灣大學, 台北市, Taiwan, December 3-4, 2016)
14. Y. H. Chang, C. J. Lu, C. S. Liu*, D. S. Liu , S. H. Chen, W. Y. Peng, C. H. Lin, “Design of miniaturized optical image stabilization actuator module for cellphone cameras,” Proceedings of the International Multi-Conference on Engineering and Technology Innovation 2016 (IMETI 2016), pp. 181, 2016. (Taichung, Taiwan, October 28-November 01, 2016)
15. Y. T. Lee, A. S. Yang*, C. S. Liu, Y. H. Chang, and Y. H. Juan, “CFD simulations to determine the loading characteristics of a micro-hydrodynamic bearing at different designs of herringbone grooves,” 2016 JSRAE Annual Conference, pp. C133, 2016. (Kobe, Japan, September 6-9, 2016)
16. P. J. Chiang*, P. H. Huang, J. C. Huang, and C. S. Liu, “The principle of 3D structure light,” Proceedings of the 1st International Conference on Engineering and Science (ICES 2016), pp. H107. (Yilan, Taiwan, July 8-10, 2016)
17. M. S. Tsai*, Y. C. Huang, C. Y. Chen, and C. S. Liu, “Vibration suppression of feed drive system for machine tool using shaping technique,” Proceedings of the 23rd International Congress on Sound and Vibration (ICSV23), pp. 361, 2016. (Athens, Greece, July 10-14, 2016)
18. Y. T. Lee, A. S. Yang*, C. S. Liu, C. H. Cheng, and Y. J. Wang, “Flow study of a micro-hydrodynamic bearing with herringbone grooves,” Proceedings of the First Pacific Rim Thermal Engineering Conference 2016 (PRTEC 2016), pp. 14597, 2016. (Hawaii's Big Island, USA, March 13-17, 2016)
19. 劉建聖*,張昱清,王澤彥,“具變焦功能自動聚焦顯微鏡設計與功能驗證,”中國機械工程學會第三十二屆全國學術研討會論文集, pp. 0276, 2015. (國立高雄應用科技大學, 高雄市, Taiwan, December 11-12, 2015)
20. C. Y. Chen, C. S. Liu*, and Y. C. Li, “Design and optimization of bi-directional-rotation herringbone-grooved journal bearings,” Proceedings of the International Conference on Computing and Precision Engineering 2015 (ICCPE 2015), pp. 7, 2015. (Nantou, Taiwan, November 27-30, 2015)
21. C. S. Liu* and Y. H. Chang, “Development of novel spindle motor with dual air gap,” Proceedings of the International Multi-Conference on Engineering and Technology Innovation 2015 (IMETI 2015), pp. 55, 2015. (Kaohsiung, Taiwan, October 30-November 03, 2015)
22. Y. J. Lan, C. S. Liu, T. C. Yang, C. Y. Chen*, and T. C. Yu, “Inverse simulation approach on determining effective thermal conductivity of porcine liver,” Proceedings of the International Multi-Conference on Engineering and Technology Innovation 2015 (IMETI 2015), pp. 225, 2015. (Kaohsiung, Taiwan, October 30-November 03, 2015)
23. J. L. Liu, C. S. Liu, J. C. Huang, C. C. Kuo, and P. J. Chiang*, “Development of three-dimensional structured light scanner with color projection system,” Proceedings of the 12th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2015), pp. 1065, 2015. (Taipei, Taiwan, September 22-25, 2015)
24. J. C. Huang, C. S. Liu*, C. C. Kuo, P. J. Chiang, and J. L. Liu, “Design and development of novel three-dimensional optical scanner,” Proceedings of the 12th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2015), pp. 1041, 2015. (Taipei, Taiwan, September 22-25, 2015)
25. C. S. Liu*, H. F. Li, and M. K. Lee, “Innovative AF VCM actuator for smart phone camera module,” Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2015), pp. DETC2015-46031. (Boston, USA, August 02-05, 2015)
26. C. S. Liu*, J. C. Huang, C. C. Kuo, P. J. Chiang, and J. L. Liu, “Study and characterization of three-dimensional structure light scanner system based on zoom-lens optical configuration,” Proceedings of the 38th International MATADOR Conference on Advanced Manufacturing, pp. 134, 2015. (Huwei, Taiwan, March 28-31, 2015)
27. 劉建聖*,李鴻飛, “新型微型音圈馬達自動對焦致動器設計,” 中國機械工程學會第三十一屆全國學術研討會論文集, pp. 53, 2014. (逢甲大學, 台中市, Taiwan, December 6-7, 2014)
28. 楊駿億, 詹家銘, 蔡宗立, 胡博期, 郭全禎, 劉建聖*,“雙共軛焦系統應用於自動對焦之研究,” 2014年模具暨應用產業技術論文發表會論文集, pp. 325, 2014. (南港展覽館, 台北市, Taiwan, August 28, 2014)
29. C. S. Liu*, M. K. Lee, and Y. C. Chuo, “Design of novel hydrodynamic grooved journal bearing with dual-layer herringbone-grooved patterns,” Proceedings of the International Conference on Engineering and Technology Innovation 2014, pp. 68, 2014. (Kenting, Taiwan, October 31-November 04, 2014)
30. J. Y. Yang, C. C. Kuo, C. S. Liu*, C. M. Jan, P. C. Hu, and C. L. Tsai, “Design and characterization of auto-focusing sensing system based on dual-confocal optical configuration,” Proceedings of the 5th International Conference on Advanced Manufacturing (ICAM2014), S0016, 2014. (Chiayi, Taiwan, September 30-October 3, 2014)
31. C. S. Liu*, H. F. Li, and H. T. Yau, “Innovative force gauge,” Proceedings of the ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis (ESDA2014), ESDA2014-20082, 2014. (Copenhagen, Denmark, June 25-27, 2014)
32. H. C. Yu*, T. C. Chen, and C. S. Liu, “Design and Position Servo Control of a Novel VCM-type Autofocus Actuator with Retaining Force,” Proceedings of the the IEEE International Magnetics Conference 2014, pp. 1841-1842, 2014. (Dresden, Germany, May 4-8, 2014)
33. 劉建聖*, 李昱澄, 陳建佑, “橢圓多階動壓軸承的最佳化設計,” 中國機械工程學會第三十屆全國學術研討會論文集, pp. 49, 2013. (國立宜蘭大學, 宜蘭縣, Taiwan, December 6-7, 2013)
34. 陳贊臣*, 余興政, 劉建聖, “手機相機之新型自動對焦音圈馬達適應性模糊PID控制,”中華民國第34屆電力工程研討會論文集, 論文編號:245, 2013. (國立勤益科技大學, 台中市, Taiwan, December 6-7, 2013)
35. 劉建聖*, 李昱澄, 陳建佑, 牟善琦, “以田口法作微型動壓軸承最佳化設計,” 中華民國力學學會年會暨第36屆全國力學會議論文集, pp. 103, 2012. (國立中央大學, 桃園縣, Taiwan, November 16-17, 2012)
36. C. S. Liu*, Y. C. Lin, and P. H. Hu, “Design and characterization of precise laser-based autofocusing microscope with reduced geometrical fluctuations,” Proceedings of the International Conference on Engineering and Technology Innovation 2012, pp. 171, 2012. (Kaohsiung, Taiwan, November 02-06, 2012)  
37. 劉建聖*, 林坤緯, 江昇鴻, 胡平浩, 林央正, “新型雙光路光學式自動聚焦顯微鏡之設計, ” 第二十屆全國自動化科技研討會論文集, pp. 17, 2012. (長庚大學, 桃園縣, Taiwan, November 2-3, 2012)
38. H. K. Lin*, H. Y. Chen, J. Y. Su, C. C. Liang, and C. S. Liu, “Addressing cholesteric liquid crystal display by pulsed laser,” Proceedings of the 43rd International Symposium on Robotics 2012, pp. 881-885, 2012. (Taipei, Taiwan, August 29-31, 2012)
39. C. S. Liu*, K. W. Lin, and S. H. Jiang, “Development of precise autofocusing microscope based on reduction of geometrical fluctuations,” Proceedings of SICE Annual Conference 2012, pp. 967-972, 2012. (Akita, Japan, August 20-23, 2012)
40. Y. C. Lin, P. H. Hu, K. Y. Huang, Y. H. Wang, S. S. Ko, and C. S. Liu*, “Design and characterization of laser-based inspection system,” Proceedings of SICE Annual Conference 2012, pp. 1062-1066, 2012. (Akita, Japan, August 20-23, 2012)
41. 劉建聖, 吳惟*, 林昌進, “共軸光學系統的MTF計算理論,” 中國機械工程學會第二十八屆全國學術研討會論文集, pp. 45, 2011. (國立中興大學, 台中市, Taiwan, December 10-11, 2011)
42. 吳惟*, 劉建聖, 林昌進, 王勺融, “含稜鏡非直線光軸光學系統的歪斜光線追蹤,” 中國機械工程學會第二十八屆全國學術研討會論文集, pp. 45, 2011. (國立中興大學, 台中市, Taiwan, December 10-11, 2011)
43. C. Y. Chen, R. H. Yen*, and C. S. Liu*, “Characteristics of dynamic coefficients on stability for herringbone-grooved journal bearings,” Proceedings of the First International Conference on Engineering and Technology Innovation 2011, pp. 179, 2011. (Kenting, Taiwan, November 11-15, 2011)
44. C. S. Liu* and S. S. Ko, “Miniature auto-focusing VCM actuator with excellent shock resistance,” Proceedings of the First International Conference on Engineering and Technology Innovation 2011, pp. 22, 2011. (Kenting, Taiwan, November 11-15, 2011)
45. C. S. Liu*, P. H. Hu, Y. H. Wang, S. S. Ke, Y. C. Lin, Y. H. Chang, and J. B. Horng, “Novel fast laser-based auto-focusing microscope,” IEEE Sensors 2010 Conference, pp. 481-485, 2010. ( Hawaii, USA, November 1-4, 2010)
46. Y. H. Wang, P. H. Hu, Y. C. Lin, S. S. Ke, Y. H. Chang, C. S. Liu, and J. B. Horng, “Dual-confocal auto-fFocus sensing system in ultrafast laser application,” IEEE Sensors 2010 Conference, pp. 486-489, 2010. ( Hawaii, USA, November 1-4, 2010)
47. S. S. Ke, K. W. Lin, Y. C. Lin, J. T. Chen, Y. H. Wang, and C. S. Liu, “High-performance inspecting system for detecting micro-crack defects of solar wafer,” IEEE Sensors 2010 Conference, pp. 494-497, 2010.( Hawaii, USA, November 1-4, 2010)
48. J. Y. Lee, Y. J. Lin, Y. H. Wang, and C. S. Liu, “Development of an auto-focus system by the moiré method,” 10th International Symposium on Measurement and Quality Control, pp. D5-113, 2010. ( Osaka, Japan, September 5-9, 2010)
49. C. S. Liu , C. H. Chen, C. C. Chung, P. H. Lin, K. H. Lin, Y. N. Sun, “Colored laser photography for high speed imaging,” 15th Microoptics Conference, pp. 216-217, 2009.
50. C. S. Liu, C. H. Chen, C. C. Chung, P. H. Lin, and Y. N. Sun, “Novel colored pulse laser photography for high speed imaging,” 3rd IEEE-NANOMED Conference, pp. 153-154, 2009.
51. C. S. Liu, P. D. Lin, P. H. Lin, S. S. Ke, Y. H. Chang, and J. B. Horng, “High positioning repeatability of miniature actuator,” Asia-Pacific Conference of Transducers and Micro-Nano Technology, pp. 2S18, 2008.
52. K. W. Lin, Y. H. Chiang, Y. S. Liu, L. Y. Cheng, C. S. Liu, and Y. H. Chang, “Design of a reflected light measuring apparatus for LBIC measurement of crystalline solar cells,” 17th International Photovoltaic Science and Engineering Conference, pp. 85-86, 2007.
53. M. C. Tsai, Y. H. Wang, C. S. Liu, S. S. Ke , P. H. Lin, C. C. Chung, Y. H. Chang, and J. B. Horng, “Development of a VCM actuator for cell phone application,” Taiwan-Korea Data Storage Symposium, pp. 33-34, 2007.
54. M. C. Tsai, Y. H. Wang, C. S. Liu, S. S. Ke , P. H. Lin, C. C. Chung, Y. H. Chang, and J. B. Horng, “Design of a power-saving voice coil motor for compact camera modules,” Asia Forum on Magnetics, pp. B96-B97, 2007.
55. C. S. Liu, Y. C. Chuo, P. H. Lin, S. S. Ke, Y. H. Chang, and J. B. Horng, “Effects of the fluid dynamic bearing design on rotational precision of a spindle motor,” Asia-Pacific Data Storage Conference, pp. PA2, 2006.
56. C. S. Liu, M. C. Tsai, Y. H. Wang, Y. C. Chuo, and Y. H. Chang, “Development of a slim precise spindle motor,” 50th Magnetism and Magnetic Materials Conference, pp. HR-15, 2005.
57. C. S. Liu, M. C. Tsai, Y. H. Wang, K. W. Lin, Y. C. Chuo, L. Y. Cheng, J. Y. Lee, Y. H. Chang, and J. B. Horng, ”A slim spindle motor for blue ray disc player applications,” International Symposium on Advanced Magnetic Technologies, pp. 207-208, 2005.
58. Y. C. Chuo, J. Y. Lee, K. W. Lin, C. S. Liu, Y. H. Chang, and J. B. Horng, “Design of a miniature spindle motor with the hydrodynamic bearing,” International Symposium on Advanced Magnetic Technologies, pp. 209-210, 2005.
59. C. C. Wang, Y. D. Yao, C. S. Liu, and L. Y. Cheng, “Micro magnetic suspension motor design for miniature optical drive,” International Symposium on Optical Memory, pp. MP1, 2005.
60. Y. C. Chuo, C. C. Wang, C. S. Liu, H. C. Yu, Y. H. Chang, and J. B. Horng, ”Development of a miniature axial-field spindle motor,” Asia-Pacific Data Storage Conference, pp. 86-87, 2004.
61. C. S. Liu, M. L. Lai, Y. C. Chuo, L. Yu Cheng, K. H. Chang, W. C. Chen, and J. B. Horng, “Property analysis of a slim spindle motor having a hydrodynamic bearing,” Asia-Pacific Data Storage Conference, pp. 88-89, 2004.
62. C. C. Wang, C. S. Jang, C. W. Cheng, C. S. Liu, Y. H. Chang, and D. R. Huang, “Innovative magnetic bearing motor,” IUMRS-ICAM, 2003.


更新日期:2018-09-04
國立中正大學機械工程學系 / 621嘉義縣民雄鄉大學路168號 TEL: 886-5-272-0411 ext. 23301~5 FAX: 886-5-272-0589 E-MAIL:deptime@ccu.edu.tw
網站管理:astccc@ccu.edu.tw / 後台入口 / update:2019-01-22