研討會論文

001 1996 C. C. Cheng, C. M. Chui, 1996, “Sound Power From Water-Loaded Beams Having Periodical Spring Supports Under the Action   of Moving Line Forces,“ 中華民國第二十屆力學會議,pp. 63-68.

002 1996 C. C. Cheng, J. K. Wang, 1996, “Vibro-acoustic Response Reduction of a Fluid-Loaded Beam Using Unequally-spaced Concentrated Masses,“ 中國機械工程學會第十三屆全國學術研討會,pp. 263-271.

003 1997 鄭志鈞、楊宗仁, 1998, “擁有加強樑平板之遠場聲壓分析,” 第五屆三軍官校基礎學術研討會,pp. 4.20-1 – 4.20-8.

004 1997 鄭志鈞、王俊國,1997, “應用不等間距吸震器以減低水中樑的振動聲能,”機械工程學會第十四屆全國學術研討會, pp. 615-622.

005 1997 C. C. Cheng, J. K. Wang, 1997, “Vibro-acoustic Response Reduction of a Fluid-Loaded Beam Using Unequally-spaced Absorbers and Concentrated Masses,“ Journal of Acoustical Society of America, Vol. 101, No. 5, Pt. 2, p. 3062, 133rd ASA Meeting/NOISE-CON ‘97, State College, Pennsylvania, USA.

006 1997 C. C. Cheng, 1997, “Application of Acoustic Reciprocity in Noise PathAnalysis,“ 中華民國第五屆振動與噪音工程學會論文研討會,pp. 3-13.

007 1998 鄭志鈞、楊宗仁,1998, “擁有加強樑平板之聲壓幅射分析,” 中國機械工程學會第十五屆全國學術研討會,pp. 629-636。

008 1998 鄭志鈞,林宏明,1998,“等間距彈性支撐樑在移動負荷下之振動分析,” 中國機械工程學會第十五屆全國學術研討會,pp. 391-398。

009 1999 C. C. Cheng and J. S. Shiu, “Transient Vibration Analysis of a High Speed Feed Drive System,” The 7th National Conference on the Society of Sound and Vibration, Hsin-Chu, Taiwan, R.O.C., pp.120-126.

010 1999 C. C. Cheng, C. P. Kuo and J. W. Yang, “On the Acoustic Response of a Periodically Supported Beam Subjected to Convected Loading,” The 23rd National Conference on Theoretical and Applied Mechanics, Hsin-Chu, Taiwan, R.O.C.

011 1999 C. C. Cheng, C. P. Kuo and J. W. Yang, “Vibration Wavenumber Response of A Periodically Supported Beam Subjected To Moving Forces,” Proceeding of the 16th National Conference of the Chinese Society of Mechanical Engineers, Hsin-Chu, Taiwan,R.O.C., pp. 325-331。

012 2000 C. C. Cheng and K. C. Chiang, “Integration and Applications of a Topology Optimization System in Structural Design, ”Proceeding of the 17th National Conference of the Chinese Society of Mechanical Engineers, Kaohsiung, Taiwan,R.O.C., pp. 801-808.

013 2000 C. C. Cheng and H. S. Lai, “Transient Vibrations of a Rib-stiffened Plate Subjected to a Moving Force,” Proceeding of the 17th National Conference of the Chinese Society of Mechanical Engineers, Kaohsiung, Taiwan, R.O.C., pp. 665-672。

014 2000 C. C. Cheng and J. Y. Wang, “Vibration Analysis of a Resilient Impact Damper,” The 24th National Conference on Theoretical and Applied Mechanics, Taiwan,R.O.C.

015 2000 C. C. Cheng and J. K. Lin, “Study of The Dynamic Response of a Rotating Shaft Subjected To a High Speed Moving Force,” The 24th National Conference on Theoretical and Applied Mechanics, Chung-Li, Taiwan, R.O.C.

016 2001 C. C. Cheng and Y. C. Ku, “Vibration Analysis of a High-speed Spindle Under the Action of a Moving Mass,” The 25th National Conference on Theoretical and Applied Mechanics, Taichung,Taiwan, R.O.C., pp. 2313-2314.

017 2001 M. C. Cheng, R. J. Shyu and C. C. Cheng “Vibro-acoustic Response Analysis and Test Verification for Rocsat-1 Satellite,” The 25th National Conference on Theoretical and Applied Mechanics,Taichung, Taiwan, R.O.C., pp. 2313-2314.

018 2001 C. C. Cheng and A. G. Liu, “Applications of Topology Optimization on Inverse Problems of Strain,” Proceeding of the 18th National Conference of the Chinese Society of Mechanical Engineers, Taiwan, R.O.C.

019 2001 C. C. Cheng and K. S. Lin, “Investigation of Tunnelling Effect In Statistical Energy Analysis,” Proceeding of the 18th National Conference of the Chinese Society of Mechanical Engineers.

020 2001 K. W. Yang, A. G. Liu, C. C. Cheng and L. Y. Lo, ” Topology and Shape Optimization of Substrate using for Chirp Fiber Bragg Grating Spectrum Tuning,” Optics and Photonics Taiwan 2001,Kaohsiung, Taiwan, R.O.C., pp. 576-578.

021 2002 E. M. Chang, C. C. Cheng, L. Y. Lo, P. C. Pang and S. C. Cheng” 光纖布拉格光柵與結構基板間膠結層特性之探討,” Optics and Photonics Taiwan 2002, Taipei,Taiwan, R.O.C.

022 2002 C. C. Lin and C. C. Cheng, “Vibration Response Synthesis using Multiple Piezoelectric Actuators,” Proceeding of the 19th National Conference of the Chinese Society of Mechanical Engineers.

023 2002 F. T. Wu and C. C. Cheng, “Analysis of Dynamic Response of Rotating Circular Plate-Fluid Field Coupled System,” Proceeding of the 19th National Conference of the Chinese Society of Mechanical Engineers.

024 2002 C. C. Chen and C. C. Cheng, “Multi-Stage Topology Optimization Design,” Proceeding of the 19th National Conference of the Chinese Society of Mechanical Engineers.

025 2002 F. T. Wu and C. C. Cheng, “Analysis of Dynamic Response of Rotating Circular Plate-Fluid Field Coupled System,” Proceeding of the 19th National Conference of the Chinese Society of Mechanical Engineers.

026 2002 P. W. Wang and C. C. Cheng “Natural Frequencies Tuning Using Structural Patches,” The 26th National Conference on Theoretical and Applied Mechanics,Taiwan, R.O.C.

027 2002 M. A. Hwang and C. C. Cheng “Vibration Reduction of Mechanical Systems using Impact Dampers,” The 26th National Conference on Theoretical and Applied Mechanics, Taiwan, R.O.C.

028 2002 吳豐泰、楊國偉、鄭志鈞、林峯仰、潘國良、陳豫滎“汽車關門音音品技術之建立,“ The 11th National Conference on the Society of Sound and Vibration, Taipei,Taiwan, R.O.C., pp. 3-13. (優良應用論文獎)

029 2003 E. M. Chang, C. C. Cheng and L. Y. Lo, ”具基板布拉格光纖光柵之溫度補償設計,” Optics and Photonics Taiwan 2003, Taipei, Taiwan, R.O.C.

030 2003 B. S. Pun and C. C. Cheng, ”布拉格光纖光柵加速規之設計與分析,” Optics and Photonics Taiwan 2003, Taipei, Taiwan, R.O.C.

031 2003 P. W. Wang and C. C. Cheng, “應用阻抗法於多頻抑振器之設計,” Proceeding of the 20th National Conference of the Chinese Society of Mechanical Engineers,Taipei, Taiwan.

032 2003 C. C. Lin and C. C. Cheng, “阻抗法於結構聲壓合成之應用,” Proceeding of the 20th National Conference of the Chinese Society of Mechanical Engineers, Taipei,Taiwan.

033 2004 C. C. Cheng and F. T. Wu, “自動調節式扭轉吸振器之設計與分析,” The 12th National Conference on the Society of Sound and Vibration, Keelung, Taiwan,R.O.C.

034 2004 C. C. Cheng, F. T. Wu and K. L. Ho, “Reduction of Flow-induced Vibration and Noise of an Optical Disk Drive,” The 11th International Congress on Sound and Vibration, St. Petersburge, July 5-8, Russia, pp. 3415-3420

035 2004 C. C. Cheng, F. T. Wu and K. L. Ho, “Vibration Reduction of an Optical Disk Drive Using Rotational Vibration Absorbers,” Proceeding of the 21th National Conference of the Chinese Society of Mechanical Engineers, Kaoshiung, Taiwan.

036 2004 C. C. Cheng and W. B. Hwang, “Vibration Analysis of Twin Screw Compressors,” Proceeding of the 21th National Conference of the Chinese Society of Mechanical Engineers, Kaoshiung, Taiwan.

037 2005 C. C. Cheng and P. W. Wang, “An Impedance Modeling Technique of a Fluid-Loaded Structure,” 149th Meeting Acoustical Society of America joint meeting with the Canadian Acoustical Association, Hyatt Regency, Vancouver, Canada, 16-20 May, The Journal of the Acoustical Society of America, pp. 2488, Vol. 117, No. 4, Pt. 2 of 2, April, 2005.

038 2005 C. C. Cheng, C. C. Ho and P. S Wu, “應用拓樸最佳化法於三維動態結構之設計,”The 13th National Conference on the Society of Sound and Vibration, Changhua,Taiwan, R.O.C. (優良學術論文獎)

039 2006 C. C. Cheng, F. T. Wu, K. L. Ho, and K. S. Shiu, “Design and Analysis of Auto-balancer of an Optical Disk Drive Using Rotational Vibration Absorbers,” The 13th International Congress on Sound and Vibration, July 2-6, Vienna, Austria.

040 2006 C. C. Cheng and W. N. Cheng, “Applications of Impedance Method on Syntheses of Structure with slots,” The 30th National Conference on Theoretical and Applied Mechanics, December 15-16, DYU, Changhwa, Taiwan, R.O.C.

041 2006 C. C. Cheng , T. D. Tasi and D.W. Lin, “Applications of Topology Optimization on LCD Crashworthiness Design,” Proceeding of the 23th National Conference of the Chinese Society of Mechanical Engineers, Tainan, Taiwan.

042 2006 C. C. Cheng and W. T. Chern, “Dynamic Analysis and Simulation of Twin Screw Compressor,” Proceeding of the 23th National Conference of the Chinese Society of Mechanical Engineers, Tainan, Taiwan.

043 2007 C. C. Cheng and W. N. Cheng, “Dynamic Structure Modification Using Dents,” The 14th International Congress on Sound and Vibration, July 9-12, Cairns, Australia.

044 2007 C. C. Cheng and M. H. Tsai, “Development of Sound Field Measuring System,” Proceeding of the 24th National Conference of the Chinese Society of Mechanical Engineers, Nov. 23-24, Taoyaun, Taiwan.

045 2007 C. C. Cheng and K. S. Yu, “Development of Fiber Grating Measurement System,” Proceeding of the 24th National Conference of the Chinese Society of Mechanical Engineers, Nov. 23-24, Taoyaun, Taiwan.

046 2007 C. C. Cheng and K. S. Yu, “Development of Fiber Grating Measurement System,” Proceeding of the 24th National Conference of the Chinese Society of Mechanical Engineers, Nov. 23-24, Taoyaun, Taiwan.

047 2008 W. N. Cheng, C. C. Cheng and G. H. Koopmann, “Weak Radiator Design Using Dimples,” 155th Meeting Acoustical Society of America joint meeting with the Euronoise, Palais des Congrés, Paris, France, 29 June - 4 July, The Journal of the Acoustical Society of America, p. 3172, Vol. 123, No. 5, Pt. 2 of 2, May, 2008.

048 2008 C. C. Cheng, F. C. Wang and W. N. Cheng, “Follower Rest Design Using Vibration Absorbers for Ball Screw Grinding,” The 15th International Congress on Sound and Vibration, pp. 2398-2405, July 6-10, July 2008, Daejeon, Korea.

049 2008 C. C. Cheng and F. C. Deng, “防撞結構拓樸最佳化設計技術之研發,” The 32nd National Conference on Theoretical and Applied Mechanics, November 28-29, CCU, Chia-yi, Taiwan, R.O.C.

050 2008 C. C. Cheng and C. C. Chiu, “Vibration Analysis of Twin Screw Compressor,” The 32nd National Conference on Theoretical and Applied Mechanics, November 28-29, CCU, Chia-yi, Taiwan, R.O.C.

051 2008 C. C. Cheng and W. S. Lin, “Development of Vibration Diagnostic System for Gearbox,” The 32nd National Conference on Theoretical and Applied Mechanics, November 28-29, CCU, Chia-yi, Taiwan, R.O.C.

052 2009 C. C. Cheng F.C. Wang, W.N. Cheng, “Vibration analysis of rail grinding with double grinding wheels,” The 33nd National Conference on Theoretical and Applied Mechanics, November 13-14, NUUT, Miao-Li, Taiwan, R.O.C.

053 2009 C. C. Cheng and Y. C. Shiu, “Applications of Topology Optimization on Weak Radiator Design,” Proceeding of the 26th National Conference of the Chinese Society of Mechanical Engineers, Nov. 20-21, Tainan, Taiwan, R.O.C.

054 2009 C. C. Cheng and C. F. Lin, “Applications of Beamforming on Acoustic Holography,” Proceeding of the 26th National Conference of the Chinese Society of Mechanical Engineers, Nov. 20-21, Tainan, Taiwan, R.O.C.

055 2009 C. C. Cheng and W. H. Yang, “Investigations of Correlation between Gear Transmission Error and Gear Vibration,” Proceeding  of the 26th National Conference of the Chinese Society of Mechanical Engineers, Nov. 20-21, Tainan, Taiwan, R.O.C. 


更新日期:2018-09-04
國立中正大學機械工程學系 / 621嘉義縣民雄鄉大學路168號 TEL: 886-5-272-0411 ext. 23301~5 FAX: 886-5-272-0589 E-MAIL:deptime@ccu.edu.tw
網站管理:astccc@ccu.edu.tw / 後台入口 / update:2019-03-23