研討會論文

1. 1983 Kuo, K.K*, Siefert, J.G., Kumar, M., Andiroglu, E., and Hsieh, W.H., "Mechanisms of Crack Propagation in Burning Solid Propellants", CPIA Pub. 381, Vol. 1, September 1983, pp. 125-138, JANNAF Propulsion Systems Hazards Subcommittee Meeting.

2. 1983 Yu, S., Hsieh, W.H., and Kuo, K.K. *, "Ignition of Nitramine Propellants Under Rapid Pressurization",  AIAA Paper No. 83-1194, AIAA/SAE/ASME/ASEE 19th Joint Propulsion Conference, Seattle, WA, June 27 - 29, 1983.

3. 1984 Kuo, K.K. *, Hsieh, W.H., and Hsieh, K.C., "Hot Fragment Conductive Ignition of Solid Propellants, Part I: Theoretical Modeling", Fall Technical Meeting of the Eastern Section of the Combustion Institute, Clearwater, FL, December 2 - 5, 1984.

4. 1985 Hsieh, W. H. and Kuo, K. K. *, "Erosive Burning of Stick Propellants, Theoretical Modeling", Fall Technical Meeting of the Eastern Section of the Combustion Institute, Philadelphia, PA, November 4-6, 1985.

5. 1986 Hsieh, K.C., Hsieh, W.H., and Kuo, K.K. *, “Numerical Simulation of the Initial Phase of Combustion Processes of Stick-Propellant Bundles”, Proceedings of the 9th International Symposium on Ballistics, Royal Military College of Science, Schrivenham Miltshire, England, April 29 – May 1, 1986.

6. 1986 Athavale, M.M., Hsieh, W.H., Char, J.M., and Kuo, K.K. *, “Interaction of Flame-Spreading, Combustion and Fracture of Single-Preforated Stick Propellants”, Dynamics of Reactive Systems, Progress in Astronautics and Aeronautics, Vol. 105, Eds., J.R. Brown, J.C. Leyer and R. I. Soloukhin, American Institute of Aeronautics and Astronautics, Inc. New York, NY, 1986.

7. 1986 Hsieh, W. H. and Kuo, K. K. *, "Numerical Simulation of Erosive Burning of Unslotted Stick Propellants", Fall Technical Meeting of the Eastern Section of the Combustion Institute, San Juan, PR, December 15 - 17, 1986.

8. 1986 Kuo, K. K. *, Hsieh, W. H., and Hsieh, K. C., "Simulation of Hot Fragment Conductive Ignition Processes", ASME Winter Annual Meeting, Anaheim, CA, December 7 - 12, 1986.

9. 1986 Hsieh, W. H., Char, J. M., Hsieh, K. C., and Kuo, K. K. *, "Modeling and Measurement of Erosive Burning of Stick Propellants", AIAA Paper No. 86 1451, AIAA/SAE/ASME/ASEE 22nd Joint Propulsion Conference, Huntsville, AL, June 16 - 18, 1986.

10. 1987  Hsieh, K.C., Hsieh, W.H., Kuo, K.K. *, and Miller, M.S., “Validation of a Theoretical Model for Hot Fragment Conductive Ignition Processes of LOVA Propellants”, Proceedings of the 10th International Symposium on Ballistics, San Diego, CA, 1987.

11. 1987 Hsieh, W. H., Char, J. M., and Kuo, K. K. *, "Erosive Burning Study of Stick Propellants", AIAA Paper No. 87 2032, AIAA/SAE/ASME/ASEE 23rd Joint Propulsion Conference, San Diego, CA, June 29 - July 2, 1987.

12. 1988 Hsieh, W. H., Cheng, J. J., and Kuo, K. K. *, "Strand Burning Characteristics of Advanced Boron Based BAMO/NMMO Fuel Rich Solid Propellants", Fall Technical Meeting of the Eastern Section of the Combustion Institute, Clearwater Beach, FL, December 5 - 7, 1988.

13. 1989 Ritchie, S. J., Hsieh, W. H., and Kuo, K. K. *, "Convective Ignition of LOVA Propellants Subjected to Crossflow Heating Conditions" , 26th JANNAF Combustion Meeting, CPIA Pub. 529, Pasadena, CA, October 23 - 27, 1989.

14. 1989 Snyder, T. S., Jarymowycz, T. A., Hsieh, W. H., Yang, V., and Kuo, K. K. *, "Pyrolysis and Combustion of Solid Fuels Under Both Subsonic and Supersonic Conditions", 26th JANNAF Combustion Meeting, CPIA Pub. 529, Pasadena, CA, October 23 - 27, 1989.

15. 1989 Norton, J., Bush, R., Miller, M. S., Holmes, H., Strauss, B., Jameson, C., Pace, K. K., Hsieh, W. H., and Kuo, K. K. *, "Round Robin Study of Hot Fragment Conductive Ignition Test", 26th JANNAF Combustion Meeting, CPIA Pub. 529, Pasadena, CA, October 23 - 27, 1989.

16. 1989 Salizzoni, R. M., Hsieh, W. H., Peretz, A., and Kuo, K. K. *, "Some High Pressure Combustion Characteristics of VHBR Propellants", 26th JANNAF Combustion Meeting, CPIA Pub. 529, Pasadena, CA, October 23 - 27, 1989.

17. 1989 Marinos, C. D., Pfenning, T. M., Dick, W. G., Chryssomallis, G. S., Kuo, K. K. *, Cheung, F. B., Hsieh, W. H., and Chen, J. L., "X Ray Radiography Study of the Interaction Between a Plasma Jet and the Working Fluid of a Combustion Augmented Plasma Gun", 26th JANNAF Combustion Meeting, CPIA Pub. 529, Pasadena, CA, October 23 - 27, 1989.

18. 1989 Thynell, S. T., Hsieh, W. H., and Kuo, K. K. *, "Real Time X Ray Radiography System and Combustion FT IR Diagnostics", AFOSR/ONR Contractors' Meeting, Irvine, CA, October 16 - 18, 1989.

19. 1989 Hsieh, W. H., Yang, A. S., Yang, V., and Kuo, K. K. *, "Measurement of Flowfield in a Simulated Solid Propellant Ducted Rocket Combustion Using Laser Doppler Velocimetry", AIAA Paper No. 89 2798, AIAA/SAE/ASME/ASEE 25th Joint Propulsion Conference, Monterey, CA, July 10 - 14, 1989.

20. 1989 Kuo, K. K. *, Yang, V., Litzinger, T. A., Thynell, S. T., and Hsieh, W. H., "Fundamental Combustion Processes of Particle Laden Shear Flows in Solid Fuel Ramjets", AFOSR/ONR Propulsion Contractors Meeting, Ann Arbor, MI, June 1989.

21. 1989 Chuang, C. L., Cherng, D. L., Hsieh, W. H., Settles. G. S., and Kuo, K. K. *, "Study of Flowfield Structure in a Simulated Solid Propellant Ducted Rocket Motor", AIAA Paper No. 89-0011 27th Aerospace Sciences Meeting, Reno, NV, January 9 - 12, 1989.

22. 1989 Salizzoni, R.M., Hsieh, W.H., Kuo, K.K. *, and Juhasz, A.A., “Study of Combustion Behavior of Vry High Burning Rate Propellants Using a Real-Time X-Ray Radiography System”, Proceedings of the 11st International Symposium on Ballistiecs, Brussels, Belgium, May 9 – 11, 1989.

23. 1990 Kuo, K. K. *, Cheung, F. B., Hsieh, W. H., Chen, J. L., Marinos, C. D. and Dick, W. J., "Experimental Study of Plasma/Fluid Interaction in a Simulated CAPtm Gun", 27th JANNAF Combustion Meeting, Cheyenne, WY, November 5 - 9, 1990.

24. 1990 Kuo, K. K. *, Litzinger, T. A., Yang, V., Thynell, S. T., and Hsieh, W. H., "Ignition and Combustion Behavior of Boron-Based Solid Fuels Under Crossflow and Stagnant Conditions", The Third ONR Propulsion Meeting/Contractor's Review, Newport, RI, October 15 - 18, 1990.

25. 1990 Ritchie, S. J., Hsieh, W. H., and Kuo, K. K. *, "Convective Ignition Phenomena of LOVA Propellants", AIAA Paper No. 90 2194 AIAA/SAE/ASME/ASEE 26th Joint Propulsion Conference, Orlando, FL, July 16 18, 1990.

26. 1990 Pace, K. K., Hsieh, W. H., and Kuo, K. K. *, "Hot Fragment Conductive Ignition Characteristics of Solid Propellants", AIAA Paper No. 90 2195 AIAA/SAE/ASME/ASEE 26th Joint Propulsion Conference, Orlando, FL, July 16 18, 1990.

27. 1990 Rivera, J. D., Hsieh, W. H., and Kuo, K. K. *, "Experimental Study and Modeling of the Combustion of Programmed Splitting Stick Propellants", AIAA Paper No. 90 2198 AIAA/SAE/ASME/ASEE 26th Joint Propulsion Conference, Orlando, FL, July 16 18, 1990.

28. 1990 Kuo, K. K. *, Yang, V., Litzinger, T. A., Thynell S. T., and Hsieh, W.H., "Fundamental Combustion Processes of Particle-Laden Shear Flows in Solid Fuel Ramjets", 1990 AFOSR/ONR Propulsion Contractors' Meeting, Office of Naval Research, Contract No. N00014-86-K-0468, Atlanta, GA, June 11 - 15, 1990.

29. 1991 Yang, A.S., Hsieh, W.H., and Kuo, K.K. *, "Theoretical Study of Supersonic Flow Separation over a Reaward Facing Step", AIAA Paper No. 91-2161, 27th AIAA/SAE/ASME/ASEE Joint Propulsion Conference, Sacramento, CA, June 24-26, 1991. 

30. 1991 Rivera, J.D., Hsieh, W.H., and  Kuo, K.K. *, "Theoretical Modeling of the Combustion Processes of Programmed Splitting Stick Propellants", 13th International colloquium on the Dynamics of Explosians and Reactive systems, Nagoya, Japan, July 28-August 2, 1991.

31. 1991 Hsieh, W.H., Chen, C.L.,  and Kuo, K.K. *, “Flow Characteristics of Very-High Pressure Gas Compressors”, ASME Pressure Vessels and Components – 1991, PVP – Vol. 217, pp. 219-228.

32. 1992 Hsieh, W.H., Wu, T.T., Yeh, C.L., and Kuo, K.K. *, “Numerical Simulation of Gas-Dynamic and Heat-Transfer Processes in Two-Stage, Very High-Pressure Gas Compressors”, Proceedings of 1992 International Compressor Engineering Conference, West Lafayette, IN, July 14 – 17, 1992.

33. 1992 Chen, J.L., Hsieh, W.H., Wu, T.T., and Kuo, K.K. *, "Jet Penetration Characteristics and Taylor Cavity Development Processes Associated with Electrothermal Chemical Guns", Proceedings of the 13th International Symposium on Ballistics, Stockholm, Sweden, June 1-3, 1992.

34. 1992 Hsieh, W.H. *, and Yeh, C.L., "Measurement of Igintion and Burning Surface Temperatures of Boron", AIAA Paper No. 92-3628, 28th AIAA/SAE/ASME/ASEE Joint Propulsion Conference, Nashville, TN, July 6-8, 1992.

35. 1992 Hsieh, W.H. *, Li, W.Y., and Yim, Y.J., "Combustion Behavior and Thermochemical Properties of RDX-Based Propellants", AIAA Paper No. 92-3629, 28th AIAA/SAE/ASME/ASEE Joint Propulsion Conference, Nashville, TN, July 6-8, 1992.

36. 1992 Yang, A.S., Huang, I.T., Hsieh, W.H., and Kuo, K.K. *, "Burning-Rate Characteristics of Boron/[BAMO/NMMO] Fuel-Rich Solid Propellants under Broad Ranges of Pressure and Temperature", Second International Sympsium on Special Topics in Chemical Propulsion: Combustion of Boron-Based Propellants and Solid Fuels, Hemisphere Publishing Corp., 1992.

37. 1992 Salizzoni, R.M., Hsieh, W.H., and Kuo, K.K. *, "Temperature Sensitivity Measurements and Regression Behavior of a Family of Boron-Based Very High Burning Rate Propellants", Second International Sympsium on Special Topics in Chemical Propulsion: Combustion of Boron-Based Propellants and Solid Fuels, Hemisphere Publishing Corp., 1992.

38. 1992 Fetherolf, B. L., Liiva, P. M., Hsieh, W.H., and Kuo, K.K. *, "CO2 Laser Ignition Behavior of Several Pyrotechnic Mixtures", Proceedings of the 13th International Symposium on Ballistics, Stockholm, Sweden, June 1-3, 1992. 

39. 1992 Ritchie, S.J., Fetherolf, B.L., Hsieh, W.H., and Kuo, K.K. *, "A Comparative Analysis of the Convective and Radiative Ignition Processes of XM-39 Solid Propellants", Proceedings of the 13th International Symposium on Ballistics, Stockholm, Sweden, June 1-3, 1992.

40. 1993 Kuo, K.K. *, Litzinger, T.A., and Hsieh, W.H., "Interrelationship Between Solid Propellant Combustion and Material  Behavior", First Symposium on Energetic Material, Boston, MA, May 1993.

41. 1995  謝文馨*,戴志強,伍治年,黃仁智,"結合電腦模擬技巧應用在設計車輛保護系統之研究,第二部份:安全氣囊充氣器燃燒充氣之理論模擬",中國機械工程學會第十二屆學術研討會,嘉義縣,November 25-26, 1995.

42. 1995 謝文馨*,"氣態燃料燃燒過程中壓力效應之探討與研究",第三屆機械熱流學門研究成果研討會暨全國熱流會議,高雄市,September 3, 1995

43. 1995 Hsieh, W.H. *, and Yang, A.S., "Combustion Processes of Hydrogen/Oxygen Diffusion Flames Under High-Pressure Conditions", AIAA 33rd Aerospace Sciences Meeting, Reno, NV, January 9-12, 1995. 

44. 1995 Wu, T.T. and Hsieh, W.H. *, "High-Pressure Heat Transfer in a Reciprocating Gas Compressor", ASME Thermal Engineering Joint Conference, Maui, Hawaii, March 19-24, 1995.

45. 1995 謝文馨*,何在晟,楊安石,"高壓氫氧擴散火燄的理論模擬",中華民國第五屆燃燒科技研討會,中山大學,高雄,March 18-19, 1995.

46. 1996 Hsieh, W.H. * and Sun L.I., “Combustion and Inflation Processes of Pyrotechnic Airbag Inflators”, 3rd International Symposium on Sophisticated Car Occupant Safety Systems, Karlsruhe,Germany,Nov.26-27,1996.

47. 1996 謝文馨*,“氣態燃料燃燒過程中壓力效應之探討與研究(II)”,第四屆機械熱流學門研究成果研討會,華梵人文科技學院,台北縣,May 17, 1996

48. 1996 謝文馨*,伍次寅,林清淵, “衛星單基推進劑供給系統行為特性之研究”,第一屆太空委辦計畫成果研討會,太空計畫室籌備處,新竹市,June 5-6, 1996

49. 1996 謝文馨*,郭家欣, “多孔介質冷卻效能分析”,第四屆熱流會議,國立成功大學,台南市,August 26-27, 1996

50. 1996 謝文馨*,伍次寅,“推進劑供給系統行為特性之模擬與量測”,第一屆太空委辦計畫成果研討會,太空計畫室籌備處,新竹市,June 5-6, 1996

51. 1997 謝文馨*,顏佑安,“類神經網路在高壓氫氧燃燒現象即時預測之應用”,第七屆燃燒科技應用研討會,國立台灣大學,台北市,March 17-18, 1997

52. 1997 謝文馨*,孫良宜,陳正康,王尚文,“安全氣囊充氣器理論分析方法之建立”, 第七屆燃燒科技應用研討會,國立台灣大學,台北市,March 17-18, 1997

53. 1997 謝文馨*,顏佑安,“應用類神經網路預測高壓氫氧擴散火焰之燃燒現象”,第十四屆中國機械工程全國學術研討會,中國機械工程學會,中壢市, December 1997

54. 1997 謝文馨*,孫良宜,“汽車安全氣囊充氣器燃燒過程之反向設計”, 第十四屆中國機械工程全國學術研討會,中國機械工程學會,中壢市, December 1997

55. 1997 謝文馨*,孫良宜,陳正康,王尚文,“充氣器充氣過程之理論模擬與計算”, 八十六年度汽車安全氣囊技術研討會,國立師範大學,台北市,December 1997.

56. 1997 Hsieh, W.H. * and Lu, S.F., “Thermal Dispersion in Thermally-Developing Region of Porous Media”,1997 International Mechanical Engineering Congress & Exposition, Dallas, Texas, November 16-21, 1997.

57. 1997 Hsieh, W.H. *, Lin, C.Y.and Yang, A.S., “Blow-Down Behavior of Mono-Propellant Feeding Systems for Sattellite Attitude and Reaction control”, 33rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Seattle, WA, July 7-9, 1997.

58. 1998 Hsieh, W.H. * and Lu, S.F., “Heat-Transfer Analysis for Thermally-Developing Region of Annular Porous Media”, 11th International Heat Transfer Conference, Kyongju, Korea, August 23-28, 1998.

59. 1999 Hsieh, W.H. *, Yen,Yo-Ann. and Yang An-Shik., “Application of Artificial Neural Networks to Prediction of Axisymmitric Hydrogn/Oxygen Diffusion Flames at High Pressures” , Second Asia-Pacific Conference on Combustion, Tainan, Taiwan, May 9-12,1999.

60. 1999 Hsieh, W. H. * and Lu, S.F., “Heat-Transfer Processes in Thermally-Developing Region of a Porous Annulus with Solid Matrix of Large Thermal Conductivity”, 5th ASME/JSME Joint Thermal Engineering Conference, San Diego, California, March 15-19, 1999

61. 1999 Hsieh, W. H. *, Foo, J.J. and Lu, S.F., “Numerical Simulation of Non-Thermal-Equilibrium, Forced Convective Compressible Flow in a Metal Porous Channel with Longitudinal Heat Conducction”,1999 National Heat Transfer Conference, Albuquerque, New Mexico, August 15-17,1999

62. 1999 謝文馨*,吳瑋特,”安全氣囊充氣之過濾器特性鑑定” ,第十六屇中國機械工程學會全國學術研討會,中國機械工程學會,新竹市,December 1999

63. 1999 謝文馨*, 廖聲榮, “噴霧冷卻特性之量測”  , 第十六屇中國機械工程學會全國學術研討會, 中國機械工程學會, 新竹市, December 1999

64. 2000 Hsieh, W.H. *, Lee, W.S. and Liao, S.R., “An Investigation of Heat-Transfer and Flow Characteristics of Ceramic Regenerators ” , International Symposium on High Temperature Air Combustion and Application, Hsinchu, Taiwan, May 15-18 2000

65. 2000 Hsieh, W.H. * and Wu, W.T. “Determination of Flow and Heat Transfer Parameters in Porous Media with Consideration of Density Variation of Working Fluid ” , 2000 International Mechanical Engineering Congress and Exposition (IMECE), Walt Disney World Dolphin, Orlando, Florida, USA, November 5-10, 2000

66. 2001 謝文馨*,劉嘉峰,楊適華,“多孔性燃燒加熱爐燃燒現象研究”,2001中華民國「燃燒學會/民航學會/航太學會」學術聯合會議,中華民國燃燒學會、中華民用航空太空學會、元智大學,元智大學五館國際會議廳,March 2001

67. 2001 Hsieh, W.H. *, Shih, W.H, and Chao, C.H.. “Thermal Analysis of Metal-Foam Heat Sinks” , 2001 International Electronic Packaging Technical Conference and Exhibition (IPACK), Kauai, Hawaii, USA, July 8-12, 2001

68. 2002 Liao, S.J., Chang, D.Y, Chen, H.J., Tsou, L.S., Ho, J.R., Yau, H.T., Hsieh, W.H. *, Wang, James T., and Su, Y.C., “Investigation of Optimum Conditions of Thin-Wall Injection Modeling Process” , ANTEC 2002, San Fracncisco, CA, USA, May 5-9, 2002

69. 2002 Liao, S.J., Chang, D.Y, Chen, H.J., Tsou, L.S., Ho, J.R., Yau, H.T., Hsieh, W.H. *, Wang, James T., and Su, Y.C., "Optimal Process Condition for Injected Thin-Wall Parts", PPS (Polymer Process Society)-2002, Taipei, Taiwan, Nov. 4-8, 2002.

70. 2002 Chi-Wung Wong, Jing-Huei Wang, Jin-Pang Wang, and Wen H. Hsieh*, “Dual Stage Pyrotechinic Inflator”, 6th International Symposium and Exhibition on Sophisticated Car Occupant Safety Systems, Risiken bei der Unfallrettung, December 2-4,2002

71. 2003 謝文馨*,劉嘉峰,“預混燃氣於多孔性燃燒加熱爐之燃燒特性”,中華民國燃燒學會第十三屆學術研討會,中華民國燃燒學會、國立台灣科技大學,台北市公務人力發展中心,March 29, 2003

72. 2004 W. T. Wu, W. H. Hsieh*, C. H. Huang, and C. H. Wang,“Simulation of Combustion and Inflation Processes of Dual-Stage Airbag Inflators”,中華民國燃燒學會第十四屆學術研討會,國立中央大學,March 27, 2004

73. 2004 W. H. Hsieh*, J. Y. Wu, W. H. Shih, and W. C. Chiu,“Experimental Investigation of Heat-Transfer Characteristics of Aluminum-Foam Heat Sinks”,中華民國燃燒學會第十四屆學術研討會,國立中央大學,March 27, 2004

74. 2004 J. F. Liu, W. T. Wu, W. C. Chiu, and W. H. Hsieh*,“Flow Resistance Measurement and Correlation in Foam Matrixes”,中華民國燃燒學會第十四屆學術研討會,國立中央大學,March 27, 2004

75. 2006 W.-T. Hsu, L.-K. Chau, P.L. Chen and W.H. Hsieh*, ”Integration of Fiber-Optic Localized Surface Plasmon Resonance Biosensor and Microfluidic Chips”, Biosensors 2006, Toronto Canada, 10-12 May, 2006.

76. 076 2007 Lai-Kwan Chau*, Wen-Hsin Hsieh, Wei-Ting Hsu, Po-Liang Chen, Kuo-Wei Huang, Chung-Yu Chen, Wen-Yun Li, Hauh-Jyun Candy Chen, Li-Ching Shen, Chia-Ming Chang, Wun-Peng Lin, Ya-Wei Chu, Tzyy-Schiuan Yang, Chia-Yi Huang, “Noble Metal Nanoparticles in Biodetection”, International Conference on Nanotechnology and Advanced Materials 2007, Hong Kong, Dec. 11- 14, 2007.

77. 2008 K. L. Fan, C. C. Hou, W. T. Wu, M.-J. Tseng and W. H. Hsieh*, "Effects and Optimization of Thermal Parameters on Freezing Injury in FaDu Nasopharyngeal Carcinoma Cells", 45th Annual Meeting of the Society for Cryobiology, Charlotte, North Carolina, July 20-23, 2008. 

78. 2010 J.L. Chen, W.H. Shih and Wen-Hsin Hsieh*, "Ac Electro-Osmotic Micromixer Using a Face-to-Face, Asymmetric Pair of Planar Electrodes", The 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences, Groningen, Netherands, Oct. 3-7, 2010.

79. 2010 Wun-Jie Chen and Wen-Hsin Hsieh*, "A Microfluidic Device with Hydrodynamic Switching for Transport Property Measurements of Cell Membranes", The 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences,  Groningen, Netherands, Oct. 3-7, 2010.

80. 2010 Wei-Hung Shih, Jhih-Lin Chen and Wen-Hsin Hsieh*," Numerical Investigation of Three-Dimensional Non-Linear Ac Electro-Osmotic Flow", The Second European Conference on Microfluidics, Toulose, France, Dec. 8-10, 2010.

81. 2010 J.L. Chen, W.H. Shih and W.H. Hsieh*, “AC electro-osmotic micromixer using a face-to-face, asymmetric pair of planar electrodes”, μTAS 2010.

82. 2010 W.H. Shih, J.L. Chen and W.H. Hsieh*, “Generation of Three-Dimensional Non-Linear AC Electro-Osmotic Flow Induced by a Face-to-Face, Asymmetric Pair of Planar Electrodes”,microfluidics 2010. 

83. 2011 H.S. Li, W.H. Hsieh*, L.K. Chau, K.C. Liu, ”An improved micro injection molding technique for grating devices”, Microtech 2011.

84. 2012 J.L. Chen, W.H. Shih, W.H. Hsieh*, “Performance of an AC-EO Micromixer with FAPPES in Mixing the Nano- and Micro-scale Bio-particles”, NEMS 2012. 

85. 2012 S.H Hsieh, W.H. Hsieh*, C.S. Huang, Y.H. Huang, “Numerical Analysis of Performance, Rotor Temperature Distributions, and Rotor Thermal Deformation of an R134a Screw Compressor”, International Compressor Engineering Conference 2012.

86. 2012 C.L. Ku, H.Y. Li, M.S. Chang, L.K. Chau, W.H. Hsieh*, “μ-TAS for label-free biosensing with double-sided grating waveguide”, ISOT 2012. 

87. 2013 Y.C. Lee and W.H. Hsieh*, “A microflow cytometer chip driven by the absorbent force of on-chip superabsorbent materials”, ICST 2013. 

88. 2014 W. H. Shih, C. C. Liu, W. H. Hsieh*, “The effect of contact ratio on the cooling performance of an aluminum-foam heat sink with a solid aluminum core”, ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis.

89. 2015 Guo-En Chang*, YI-Fan Ku, Hsun-Yuan Li, Yu-Chung Lin, Wen-Hsin Hseih “Low-cost and label-free bio-sensing platform employing double-sided grating waveguide couplers”, IDETC/CIE 2015

國立中正大學機械工程學系 / 621嘉義縣民雄鄉大學路168號 TEL: 886-5-272-0411 ext. 23301~5 FAX: 886-5-272-0589 E-MAIL:deptime@ccu.edu.tw
網站管理:astccc@ccu.edu.tw / 後台入口 / update:2018-10-15