期刊論文

英文期刊

                  001 1995 R. F. Keltie*, C. C. Cheng, “Vibration Reduction of Mass-loaded Beam,” Journal of Sound and Vibration, Vol. 187(2), pp. 213-p228. (SCI, EI)

 

002 1998 C. C. Cheng*, J. K. Wang, “Structural Acoustic Response Reduction of a Fluid-Loaded Beam Using Unequally-spaced Concentrated Masses,“ Applied Acoustics, Vol. 54(4), pp. 291-303. (SCI, EI)

 

003 1999 C. C. Cheng* and C. M. Chui, “Sound Radiation from Periodically Spring-Supported Beams under the Action of Moving Line Forces,” Journal of Sound and Vibration, Vol. 226(1), pp. 83-99. (SCI, EI)

 

004 2000 C. C. Cheng*, C. P. Kuo and J. W. Yang, “Wavenumber-Harmonic Analysis of a Periodically Supported Beam under the Action of a Convected Loading,” Journal of Vibration and Acoustics, Transactions of the ASME, Vol. 122(3), pp. 272-280. (SCI, EI)

 

005 2001 C. C. Cheng*, and J. S. Shiu, “Transient Vibration Analysis of a High Speed Feed Drive System,” Journal of Sound and Vibration, Vol. 239, n. 3, pp. 489-504. (NSC 88-2622-E-194-003) (SCI, EI)

 

006 2001 C. C. Cheng*, C. P. Kuo and J. W. Yang, “A Note On the Vibro-acoustic Response of a Periodically Supported Beam Subjected to a Convected Loading,” Journal of Sound and Vibration, Vol. 239(3), pp. 531-544. (NSC 89-2212-E-194-010) (SCI, EI)

 

007 2001 C. C. Cheng*, C. P. Kuo and J. W. Yang, “Wave Propagation of a Elastically Supported Fluid-loaded Beam Subjected to a Moving Load,” Journal of Chinese Society of Engineers, Vol. 22, No. 1, pp. 31-39. (NSC88-2212-E-194-004) (EI)

 

008 2001 C. C. Cheng* and P. W. Wang, “Applications of the Impedance Method on Multiple Piezoelectric Actuators Driven Structures,” Journal of Vibration and Acoustics, ASME, Vol. 123. n. 2, pp.262-268. (NSC88-2212-E-194-004) (SCI, EI)

 

009 2002 C. C. Cheng* and J. K. Wang, “Applications of Unequally Spaced Absorbers on Vibro-Acoustic Response Reduction of a Fluid-Loaded Beam,” Journal of Chinese Society of Engineers, Vol. 23, No. 1, pp. 85-91. (NSC86-2221-E-194-030R). (EI)

 

010 2002 K. W. Yang, A. G. Liu, C. C. Cheng* and Y. L. Lo, “Topology and Shape Optimization of Substrate using for Chirp Fiber Bragg Grating Spectrum Tuning,” IEEE/OSA Journal of Lightwave Technology, Vol. 20, No. 7, pp. 1182-1187. (NSC89-2622-L-011-001) (SCI, EI)

 

011 2003 C. C. Cheng* and J. K. Lin, “Modeling of a Rotating Shaft Subjected to a High Speed Moving Force,” Journal of Sound and Vibration, Vol. 261, pp. 955-965. (NSC 89-2212-E-194-010) (SCI, EI)

 

012 2003 C. C. Cheng* and J. Y. Wang, “Free Vibration Analysis of a Resilient Impact Damper,” International Journal of Mechanical Science, Vol. 45, No. 4, pp. 589-604. (NSC 89-2212-E-194-010) (SCI, EI)

 

013 2004 E. M. Chang, C. C. Cheng* and Y. L. Lo, “Thermal Compensation for a Chirp FBG-bonded Substrate,” IEEE, Transactions on Advanced Packaging, Vol. 27, No. 1, 188-193. (NSC89-2622-L-011-001) (SCI, EI)

 

014 2004 U. C. Gu and C. C. Cheng*, “Vibration Analysis of a High-speed Spindle Under the Action of a Moving Mass,” Journal of Sound and Vibration, 278, pp. 1131 - 1146. (NSC 90-2622-E-194-003) (SCI, EI)

 

                      015 2005        F. T. Wu, K. W. Yang, C. C. Cheng*, F. Y. Lin, K. L. Pan and Y. Y. Chen, “Development of the Methodology to Improve Automotive Door Closing Sound,” IMechE, Part D: Journal of Automobile Engineering, 219, pp. 1 - 10. (SCI)

 

                016 2005        C. C. Cheng* and C. C. Lin, “An Impedance Approach for Vibration Response Synthesis Using Multiple PZT Actuators,” Sensors and Actuators A: Physical, 117(3),  pp. 480-490. (NSC 90-2622-E-194-003) (SCI)

 

017 2005 C. C. Cheng* and P. W. Wang, “Natural Frequencies Tuning Using Structural Patches,” Journal of Vibration and Acoustics, ASME, Vol. 127, No. 1, pp. 28-35. (NSC 90-2622-E-194-003) (SCI, EI)

 

                018 2005        C. C. Cheng* and C. C. Lin, 2005, “An Impedance Approach for Determining Optimal Locations and Shapes of Multiple Induced Strain Actuators,” Smart Materials and Structures, 14, pp. 1120-1126. (NSC 90-2622-E-194-003) (SCI, EI)

 

                019 2005 C. C. Cheng*, Y. L. Lo, B. S. Pun, E. M. Chang and W. Y. Li “An Investigation of Bonding Layer Characteristics of a Substrate-Bonded Fiber Bragg Grating,” IEEE/OSA Journal of Lightwave Technology, Vol. 23, No. 11, pp.3907-3915. (NSC89-2622-L-011-001) (SCI, EI)

 

                020 2005        C. C. Cheng* and P. W. Wang, “An Impedance Modeling Technique For a Fluid-loaded Structure,” AIAA Journal, Vol. 43, No. 11, pp. 2454-2457. (NSC 91-2212-E-194-020) (SCI, EI)

 

 

                 021 2006 P. W. Wang and C. C. Cheng*, “Design of Vibration Absorbers Used in Multiple Tonal Excitations,” Journal of Vibration and Acoustics, ASME, Vol. 128, No. 1, pp. 106-114. (NSC 90-2622-E-194-003) (SCI, EI)

 

                022 2006        F. T. Wu and C. C. Cheng*, “Design and Analysis of a Speed-Dependent Torsional Vibration Absorber,” IMechE, Part D: Journal of Automobile Engineering, Volume 220, Number 6, 2006, pp. 763-774. (SCI, EI)

 

                023 2007 C. C. Cheng*, Y. L. Lo, W. Y. Li, C. T. Kuo and H. C. Cheng, “Estimations of Fiber Bragg Grating Parameters and Strain Gauge Factor Using Optical Spectrum and Strain Distribution Information,” Applied Optics, Vol. 46, Issue 21, pp. 4555-4562.  (SCI, EI)

 

024 2007 P. W. Wang and C. C. Cheng*, “A design methodology for multiple tonal beam-type vibration absorber,” Noise & Vibration Worldwide, Vol. 38, No. 10, pp. 11-16. (NSC 90-2622-E-194-003) (Invited paper)

 

                   025 2008 C. C. Cheng*, F. T. Wu, K. S. Hsu and K. L. Ho, “Design and Analysis of Auto-Balancer of an Optical Disk Drive Using Speed-Dependent Vibration Absorbers,” Journal of Sound and Vibration, Vol. 311, pp. 200–211. (NSC 95-2221-E-061) (SCI, EI)

 

                026 2008 C. C. Cheng* and C. C. Lin, “Acoustic Response Synthesis Using Multiple PZT Patches,” Journal of Vibration and Acoustics, ASME, Vol. 130, 011011. (NSC 88-2622-E-194-003) (SCI, EI)

 

                027 2008 C. C. Cheng*, T. D. Tsai, D. W. Lin and C. C. Chiu, “Design and Analysis of Shock Absorbing Structure for Flat Panel Display”, IEEE Transactions on Advanced Packaging, Vol. 31, No.1, pp. 135-142. (SCI, EI)

 

                028 2008 W. N. Cheng, C. C. Cheng* and G. H. Koopmann, “Dynamic Beam Modification Using Dimples,” Journal of Vibration and Acoustics, ASME, Vol. 130, 041007. (NSC 94-2218-E-194-007) (SCI, EI)

 

                029 2009        W. Y. Li, C. C. Cheng* and Y. L. Lo, “Investigation of Strain Transmission of Surface-Bonded FBGs Used as Strain Sensors,” Sensors and Actuators A: Physical, Volume 149, Issue 2, 16 February 2009, pp. 201-207. (NSC 94-2218-E-194-006) (SCI)

 

                030 2009 C. C. Cheng*, F. T. Wu and K. L. Ho, “Reduction of Flow-Induced Vibration and Noise of an Optical Disk Drive,” Journal of Sound and Vibration, Journal of Sound and Vibration, 320, pp. 43 - 59. (NSC 95-2221-E-194-061) (SCI, EI)

 

                 031 2009 C. C. Cheng*, C. P. Kuo, F. C. Wang and W. N. Cheng, “Moving Follower Rest Design Using Vibration Absorbers for Ball Screw Grinding,” Journal of Sound and Vibration, Journal of Sound and Vibration, Vol. 326, pp. 123–136. (SCI, EI)

 

                 032 2010 F. C. Teng, F. T. Wu, C. C. Cheng* and C. K. Sung, “Design and Analysis of Packaging Boxes for Flat Panel Display,” IEEE Transactions on Advanced Packaging, Vol. 33, No.1, pp. 106-114. (SCI, EI)

 

                033 2010        W. Y. Li, C. C. Cheng* and Y. L. Lo, “Accurate Simulations of Reflective Wavelength Spectrum of Surface-Bonded FBG,” Applied Optics, Vol. 49, No.17, pp. 3394-3402. (SCI)

 

                034 2010 C. C. Cheng*, C. P. Kuo, F. C. Wang and W. N. Cheng, “Vibration Analysis of Rail Grinding Using a Twin-Wheel Grinder,” Journal of Sound and Vibration, Journal of Sound and Vibration, In press (SCI, EI)

 

                035 2010 W. N. Cheng, C. C. Cheng* and G. H. Koopmann, “A New Design Strategy for Minimizing Sound Radiation of Vibrating Beam Using Dimples,” Journal of Vibration and Acoustics, ASME, Accepted for publication. (SCI, EI)

(* 為通訊作者)

中文期刊

 

                  001 1999 鄭志鈞,楊宗仁擁有加強樑平板之聲壓輻射分析中國造船暨輪機工程學刊機械月刊,十八卷第二期,文57-67

 

002 2002 陳建昌、姜冠禎、鄭志鈞,結構輕量化設計,機械月刊三月號,二十八卷第三期,文18-28

 

003 2003 吳豐泰、鄭志鈞,高速光碟機振動與噪音抑制之研究,中華民國機構與機器原理學會會刊,十四卷第三期,文32-37

 

004 2004 何智強、蔡騰德、鄭志鈞,工具機結構輕量化技術,機械工業雜誌三月號,252期,166-179

 

005 2010 王福清、程文男、鄭志鈞,研磨顫振抑制機構之設計、模擬與分析 機械月刊四月號,第417期,文26-42

 

 

 

 


更新日期:2018-09-04
國立中正大學機械工程學系 / 621嘉義縣民雄鄉大學路168號 TEL: 886-5-272-0411 ext. 23301~5 FAX: 886-5-272-0589 E-MAIL:deptime@ccu.edu.tw
網站管理:astccc@ccu.edu.tw / 後台入口 / update:2019-01-22